Ferdinand Stueckler

Rated 3.67(3) — Ferdinand Stueckler

Bluetooth Remote Control for color information. 3 colors are handled either as text or bytes. 6 channels for colors will be managed.The range of the values are between 0 and 255.Byte Mode (Default): Channel and 3 colors are transfered as 4 bytesExample...

Rated 3.25(12) — Ferdinand Stueckler

The purpose of the app is to control remote hardware like Arduino, Netduino, Raspberry Pi ...3 positions are handled either as text or bytes.The range of the values x,y (1. control) and z (2. control) is between -100 and 100.Byte Mode: 3 positions are...

Rated 3.35(17) — Ferdinand Stueckler

G-Sensor remote control for a LEGO Mindstorms EV3 and a Bluetooth connection.Requirements:- Lego Mindstorms EV3 Brick- Android 2.1 or higher- 2 * MotorNo program for the EV3 Brick required.Tested with Nexus S, Nexus 4 and Nexus 7.

Rated 4.15(26) — Ferdinand Stueckler

Numeric values will be sent to an EV3 bluetooth mailbox and can be used in the LEGO Mindstorms software:- First 2D Coordinate -> Mailbox x- Second 2D Coordinate -> Mailbox y- 1D Coordinate -> Mailbox zRange of Values: -100 ... 100Requirements:- Lego...

Rated 3.95(21) — Ferdinand Stueckler

Program your own LEGO Mindstorms EV3 Bluetooth Remote Control. Text or numeric values will be sent to an EV3 bluetooth mailbox and can be used in the LEGO Mindstorms software.String ... Bluetooth data handled as textNumber ... Bluetooth data handled...

Rated 3.97(30) — Ferdinand Stueckler

Remote Control for LEGO Mindstorms EV3 Engines:- First Control -> Port A and Port B- Second Control (Red) -> Port C- Third Control (Green) -> Port DRequirements:- Lego Mindstorms EV3 Brick- Android 2.1 or higher- 2 * MotorNo EV3 Program required !A previo

Rated 3.96(24) — Ferdinand Stueckler

Transmit data between LEGO Mindstorms NXT and EV3 Mailboxes. A Bluetooth connection will be established.Text, numeric and logic informations will be sent to an EV3 or NXT and can be used in LEGO Minstorms software.EV3 Mailbox mb1 <--> NXT Mailbox 1EV3...

Rated 5.00(1) — Ferdinand Stueckler

This app communicates between Android and a micro:bit device. You can transmit numeric data as text or value. The UART communication also has to be implemented at the micro:bit device.Text enabled: text data transmissionText disabled: numeric data transmi

Rated 4.00(4) — Ferdinand Stueckler

The purpose of the app is to control remote hardware like Arduino, Netduino, Raspberry Pi ...The protocol is TCP/IP (Client).3 positions are handled either as text or bytes.The range of the values x,y (1. control) and z (2. control) are between -100...

Rated 4.50(8) — Ferdinand Stueckler

Android G-Sensor data can be transfered to a LEGO Mindstorms NXT. A Bluetooth connection will be established.X -> Mailbox 1Y -> Mailbox 2Z -> Mailbox 3X,Y,Z range between 0 and 360String ... Bluetooth data handled as textNumber ... Bluetooth data handled.

Rated 5.00(1) — Ferdinand Stueckler

The purpose of the app is to control remote hardware like Arduino, Netduino, Raspberry Pi ...The first optional information is a channel, which has the range from 0 to 3.Afterwards 2 positions are handled as bytes and are almost terminated with a zero...

Rated 4.50(8) — Ferdinand Stueckler

The purpose of the app is to control remote hardware like Arduino, Netduino, Raspberry Pi ...The first optional information is a channel, which has the range from 0 to 3.Afterwards 3 positions are handled either as text or bytes.The range of the values...

Rated 3.92(25) — Ferdinand Stueckler

Send data to a LEGO Mindstorms EV3 Mailbox. A Bluetooth connection will be established.Text, numeric and logic informations will be sent to an EV3 and can be used in LEGO Minstorms software.Informations sent form the EV3 are displayed for a short time...

Rated 4.19(27) — Ferdinand Stueckler

Numeric values will be sent to an EV3 bluetooth mailbox and can be used in the LEGO Mindstorms software:- First 2D Coordinate -> Mailbox x (or a)- Second 2D Coordinate -> Mailbox y (or b)- 1D Coordinate -> Mailbox z (or c)- Buttons 1-4 -> Mailbox w (or...

Rated 3.74(39) — Ferdinand Stueckler

Remote Control for LEGO Mindstorms EV3 Engines:- First Control -> Port A and Port B Smart Turn -> Port A and Port B- Second Control -> Port CRequirements:- Lego Mindstorms EV3 Brick- Android 2.1 or higher- 2 * MotorNo EV3 Program required !A previous...

Rated 4.00(736) — Ferdinand Stueckler

After connecting the LEGO Mindstorms EV3 brick, buttons will control the engines.AB,BC,CD: Select enginesSense Mode: Push and releaese button handling; Smart Turn with red buttonReverse: All engines will be invertedRequirements:- Min. Android 2.1- LEGO...

Rated 5.00(1) — Ferdinand Stueckler

This app establishes a channel between two micro:bit devices. The channel will be handeled as UART communication. You have to develope a programm on each micro:bit device with UART transfer.Indication aktive: BLE Indication (Default)Indication inaktive:..

Rated 4.00(5) — Ferdinand Stueckler

This app communicates between Android and a micro:bit device. You can transmit and receive text in 'notification' and 'indication' mode. The UART communication also has to be implemented at the micro:bit device.Options:- Indication: Default micro:bit...

Rated 5.00(2) — Ferdinand Stueckler

The purpose of the app is to control remote hardware like Arduino, Netduino, Raspberry Pi ...The protocol is TCP/IP (Client).UP: 0, power, 0DOWN: 0, -power, 0LEFT: -power, power, 0RIGHT: power, power, 0MIDDLE: 0, 0, 0 or 0, 0, power (Zero active)Byte...

Rated 3.93(57) — Ferdinand Stueckler

G-Sensor remote control for a LEGO Mindstorms NXT and a Bluetooth connection.Requirements:- Lego Mindstorms NXT Brick- Android 2.1 or higher- 2 * MotorNo program for the NXT Brick required.NXT GSensor+ Remote: The same app with button Push for the 3rd...