Dav -Trocoide

Dav -Trocoide published 15 applications on Google Play, 21 people rated these apps with an average rating of 1.54!

Bevel Gear Design by Dav -TrocoideBevel Gear Design

Rated 5.00(1) — Dav -Trocoide

This tool calculates, using gleason methodology, the bevel gear pair geometry. It provides the recommended backlash considering the AGMA accuracy of the gears and the gear forces( tangential, radial and axial forces) derived from the gear geometry and...

$1.49
Flange Coupling Torque by Dav -TrocoideFlange Coupling Torque

Rated 0.00(0) — Dav -Trocoide

This application is able to calculate the torque capacity of a bolted flange coupling based in the geometry, number of bolts, and coefficient of friction between surfaces.This application also gives the tightening torque of the bolts, the clamp force...

$0.61
Gear Profile Tolerances by Dav -TrocoideGear Profile Tolerances

Rated 0.00(0) — Dav -Trocoide

This tool will calculate the profile allowable deviations based in the different quality level of the gear.Using the module, teeth number, helix and gear width the app calculate the following parameters:fi``: Single Flank Working DeviationFi'': Two flank.

$1.19
Involute Spline Calculation by Dav -TrocoideInvolute Spline Calculation

Rated 0.00(0) — Dav -Trocoide

This tool is able to provide the Root Shear stress, Pitch Shear Stress, Contact stress of an Involute spline geometry under a defined torque.This tool uses the calculation methodology defined by multiple engineering books and standards. As well as the...

$1.19
Metric Fastener Torque by Dav -TrocoideMetric Fastener Torque

Rated 3.00(1) — Dav -Trocoide

This app is able to calculated, based on geometry, coefficient of frictions and utilization factor, the tightening torque of metric or tailored bolts. The outputs also include the preload, torsion and tensile stress and von mises values.A safety factor...

$1.19
PressFit Shaft-Hub Calculation by Dav -TrocoidePressFit Shaft-Hub Calculation

Rated 0.00(0) — Dav -Trocoide

Press Fit calculation app will calculate the dimensions of the shaft and hub to fulfill the torque requirement defined by the user.Also the calculation provide: - Shaft Tolerances - Hub Tolerances - Shaft / Hub max pressure - Shaft / Hub stresses - Shaft.

$1.19
Spiral Bevel Gear Forces by Dav -TrocoideSpiral Bevel Gear Forces

Rated 0.00(0) — Dav -Trocoide

This application calculates the reaction forces arised from a spiral bevel gear set based in the geometry and torque transferred. Information needed: Teeth Number, module, face width, spiral angle, pressure angle, torque, speed, direction of helix and...

$1.79
StackUp Tolerance Analysis by Dav -TrocoideStackUp Tolerance Analysis

Rated 0.00(0) — Dav -Trocoide

Tool to perform dimensional stackup analysis of your assemblies. It is able to do a Worst case scenario and in the same way, perform a Root Sum Square analysis of the stack. It is also able to calculate the Modified Root Sum Square Calculation.Current...

$1.21
Epicyclic Gears by Dav -TrocoideEpicyclic Gears

Rated 3.00(2) — Dav -Trocoide

This application is able to calculate the motion relation, torque distribution and cycle counting of an epicyclic gear train. You need to define the elements role in the gear train, input, output or fixed. Set the number of planets and the dynamic paramet

$1.19
Flange Coupling Torque Free by Dav -TrocoideFlange Coupling Torque Free

Rated 4.20(5) — Dav -Trocoide

This application is able to calculate the torque capacity of a bolted flange coupling based in the geometry, number of bolts, and coefficient of friction between surfaces.This application also gives the tightening torque of the bolts, the clamp force...

Free App
Gear Stress Calculation by Dav -TrocoideGear Stress Calculation

Rated 0.00(0) — Dav -Trocoide

This app calculates the gear dimensions using the following parameters: 1.- Module 2.- Teeth Number 3.- Helix Angle 4.- Addendum Factor 5.- Pressure Angle 6.- Face Width 7.- Modified Center distanceThe app will provide as a results parameters the main...

$1.19
Machining Tolerances by Dav -TrocoideMachining Tolerances

Rated 0.00(0) — Dav -Trocoide

This tool uses the standard ISO 281 as a base for the calculation of the tolerance range for your defined nominal dimension. It will provide tight, Standard and wider tolerances for different machining processes.The tool can help designers that would...

$0.91
Metric Fastener Torque Free by Dav -TrocoideMetric Fastener Torque Free

Rated 3.63(8) — Dav -Trocoide

This app is able to calculated, based on geometry, coefficient of frictions and utilization factor, the tightening torque of metric or tailored bolts. The outputs also include the preload, torsion and tensile stress and von mises values.A safety factor...

Free App
Quick Gear Design by Dav -TrocoideQuick Gear Design

Rated 0.00(0) — Dav -Trocoide

This tool generates the basic geometry of a pair of external gears. Using the module, teeth number, helix angle, pressure angle, addendum ratio values and center distance.Also provide the Gear Ratio of the mesh, as well as a value for the X profile ratio.

$1.18
Spline Torque Calculation Free by Dav -TrocoideSpline Torque Calculation Free

Rated 4.25(4) — Dav -Trocoide

This tool provide the Root Shear stress, Pitch Shear Stress, Contact stress of an Involute spline geometry under a defined torque. This Free Version will not provide safety factors based on the material selection.This tool uses the calculation methodology

Free App