Easy Styrofoam Bandana Bulletin Board

Create a custom bulletin board in less than an hour! Cowboy bandanas are a classic look, but you can find craft bandanas in many different colors and designs. Or, substitute a piece of favorite fabric for the bandana.

Completion time – 1 hour

Materials
STYROFOAM Brand Foam
STYROFOAM™ Brand Foam*: 1” x 12” x 36” sheet

Other Materials
Craft bandana
Low-temp glue gun & glue sticks or thick, white craft glue

Tools

Scissors
Ruler
Sharp pencil
Serrated knife
Old candle or bar of soap
Toothpicks, six
Straight pins
Iron and ironing board
Saw tooth picture hangers, two

Instructions
1. Using a ruler and sharp pencil, measure and score two rectangles on the 12” x 36” x 1” foam sheet: one 12” x 18” and one 6” x 18”. Wax the knife blade with an old candle or bar of soap, and cut out each rectangle along the scored lines.

2. Join rectangles together. Dip ends of six toothpicks in glue, and insert each pick halfway into the 18” edge of the 12” x 18” rectangle. Squeeze glue on exposed ends of the toothpicks, and along the edge of the foam board, and glue and pick the 6” x 18” rectangle to the larger piece. Let glue dry.Iron the bandana to remove the wrinkles.

3. Place the bandana face down, and center the foam square on it. Wrap the bandana around the foam square, just like wrapping a package. Carefully fold the bandana at each corner to be sure the corners are square.Pin and glue the excess fabric to the back. Cut away any excess fabric.

4. Add sawtooth picture hangers to each corner. Dip nails in glue, and then insert the nails through the hangers and into the back of the bulletin board. Let glue dry before hanging the bulletin board.

the creativity is endless. so enjoy your own favorite guys!

for further information and detail tutorial, download this application now and you will have what you want.
please enjoy this tutorial and give us any feedback.