SmartWatch 2 widget OST watch

[お客様各位]
2014.10.31 - 有料アプリを販売中止としたお知らせから1ヶ月経ちました。それゆえ、告知文を簡便にしました。
2014.9.30 - GoogleはGooglePlay契約書を更新しました。(2014.9.25)。- WEARIDEでは、有料アプリを販売中止にしました。(公開停止は、SP00、EF00、RCK、OCB)。非公開となった有料アプリがライセンスされるかは不明ですが、インストール済みであればバックアップをお勧めしています。
2014.9.18 - Googleは販売者の住所の公開を義務化しました。(2014.9.30)。- WEARIDEでは、有料アプリを販売中止(公開停止)の方向性です。
------

フレキシブルウォッチセレクターによって、4096個の中から簡単に30種類をいつでも選んで SmartWatch2のウォッチウィジェットとして活用できます。

OSTを無料版としました。有料版であったときと同様に、含まれるすべてのウォッチウィジェットはご利用可能になっています。

・ウィジェット編集欄のウィジェットサイズ5x5と４x4のアイコンは同じ絵柄です。
・シークバーの操作はスライドかタップで行います。

[ご使用方法]
1. "WEARIDE OST ClockWidgets"のランチャーアイコンやメニューから設定画面を開く。
2. 設定画面では、SmartWatch2ウィジェット編集覧に加えたいウォッチをモデリング、選択。
3. 選択したウォッチをウィジェット編集覧に反映する為、"スマートコネクト"を終了。
4. 再び、"スマートコネクト"を起動後、ウィジェット編集欄の並びに反映される。

[ウィジェットが反映されない等の対処方法]
・ 各デバイスのBluetooth再接続、再ペアリング、デバイス再起動、SW2デバイスリセットを試す。
・ ウィジェット編集欄にない際は、[ご使用方法] 3. 4.の手順を繰り返す。

[ご留意事項]
・ 各ウォッチがSmartWatch2デバイスのロード完了まで、約35秒程。
・ 掲載画像は加工済みです。

[Introduction]
1.1. Open the Smart-Connect app.
1.2. Open the SmartWatch2 app.
1.3. See a list of apps that have been installed. (screen-shot No.1).
1.3.1. If there is no "WEARIDE OST ClockWidgets" in the list, please try the following.

2.1. Open the application screen from the Home screen of the smartphone / tablet.
2.1.1. display the "WEARIDE OST ClockWidgets" icon in the application screen. (screen-shot No.1).
2.2. Open the setting screen of the "WEARIDE OST ClockWidgets".
2.2.1. (Automatically, to authenticate the license of Google., Please have an Internet connection.).
2.3. Select the check-box of the Clock, in the setting screen of "WEARIDE OST ClockWidgets".
2.4. Close the setting screen of "WEARIDE OST ClockWidgets". (screen-shot No.2).

3.1. Open the Smart-Connect app. Here, the setting of "WEARIDE OST ClockWidgets" does not apply to the Smart-Connect app.
3.2. Close the Smart-Connect app.
3.2.1. Display a list of applications from the square icon to the right of the house icon in the bottom of the screen of the smartphone / tablet.
3.2.2. Be terminated the Smart-Connect app from the list of applications. (screen-shot No.3).

4.1. Open the Smart-Connect app. Here, the setting of "WEARIDE OST ClockWidgets" will be applied to the Smart-Connect app.
4.2. Open the SmartWatch2 app.
4.2.1. See a list of apps that have been installed. "WEARIDE OST ClockWidgets" will be displayed.
4.3. Open the widget editing screen from "Watch Faces".
4.3.1. the Clock has been added to the widget edit field. (screen-shot No.4).
------
5.1. Has been displayed in 4.3.1?

5.2. In the case of "No". Please try the following.
5.2.1. require steps from 2.4 to 4.1. for loading of definition of "WEARIDE OST ClockWidgets". (Smart-Connect app status quo).

5.3. In the case of "Yes". but the widget is not displayed on the SmartWatch2 devices. please try the following.
5.3.1. Reconnection of Bluetooth.
5.3.2. Re-pairing.
5.3.3. SmartWatch2 devices Power off / on.
5.3.4. "Reset of Smart Watch" of SmartWatch2 devices menu.

Note : Smart-Connect app, and SmartWatch2 app, and SmartWatch2 device, is not stable.
------
the machine translation of Google. [Dear Customer]
2014.10.31 - I have passed one month from the announcement that was discontinued a paid app. Therefore, I decided to simplify the announcement statement.
2014.9.30 - Google has been updated GooglePlay agreement. (2014.9.25). - In WEARIDE, I decided to discontinued the paid app. (Public stop, SP00, EF00, RCK, OCB). It is unknown whether paid app that has become private is license, but recommends a backup, if installed.
2014.9.18 - Google has mandated the publication of the seller's address. (2014.9.30). - In WEARIDE, it is the direction of the discontinued the paid apps (unpublished).
------

By flexible watch selector, you can take advantage of as SmartWatch2 Watch widget and choose at any time easily 30 types out of 4096.

The OST I have a free version. In the same way as when it was a paid version, all of the watch widget that is included has become available.

Widget size 5x5 and 4x4 of the icon of the widget edit field is the same pattern.
· Seek bar operations I done in the slide or tap.

[How to Use]
  1. I open the configuration screen from the launcher icons and menu of "WEARIDE OST ClockWidgets".
  2. In the Settings screen, modeling the watch you want to add to SmartWatch2 widget edit list, select.
  3. In order to reflect the selected watch widget edit list, and terminates the "Smart Connect".
  4. again, after starting the "Smart Connect", it is reflected in the list of widgets edit field.

[Action such as the widget is not reflected]
· Bluetooth re-connection of each device, re-pairing, the device restart, I try SW2 device reset.
• When not in the widget edit column, I repeat the procedure of [How to Use] 3. 4..

[Please Notes]
· Each until the watch is SmartWatch2 device load completion of, as about 35 seconds.
· The information image is already processing.

[Introduction]
1.1. Open the Smart-Connect app.
1.2. Open the SmartWatch2 app.
1.3. See a list of apps that have been installed. (Screen-shot No.1).
1.3.1. If there is no "WEARIDE OST ClockWidgets" in the list, please try the following.

2.1. Open the application screen from the Home screen of the smartphone / tablet.
2.1.1. Display the "WEARIDE OST ClockWidgets" icon in the application screen. (Screen-shot No.1).
2.2. Open the setting screen of the "WEARIDE OST ClockWidgets".
2.2.1. (Automatically, to authenticate the license of Google., Please have an Internet connection.).
2.3. Select the check-box of the Clock, in the setting screen of "WEARIDE OST ClockWidgets".
2.4. Close the setting screen of "WEARIDE OST ClockWidgets". (Screen-shot No.2).

3.1. Open the Smart-Connect app. Here, the setting of "WEARIDE OST ClockWidgets" does not apply to the Smart-Connect app.
3.2. Close the Smart-Connect app.
3.2.1. Display a list of applications from the square icon to the right of the house icon in the bottom of the screen of the smartphone / tablet.
3.2.2. Be terminated the Smart-Connect app from the list of applications. (Screen-shot No.3).

4.1. Open the Smart-Connect app. Here, the setting of "WEARIDE OST ClockWidgets" will be applied to the Smart-Connect app.
4.2. Open the SmartWatch2 app.
4.2.1. See a list of apps that have been installed. "WEARIDE OST ClockWidgets" will be displayed.
4.3. Open the widget editing screen from "Watch Faces".
4.3.1. The Clock has been added to the widget edit field. (Screen-shot No.4).
------
5.1. Has been displayed in 4.3.1?

5.2. In the case of "No". Please try the following.
5.2.1. Require steps from 2.4 to 4.1. For loading of definition of "WEARIDE OST ClockWidgets". (Smart-Connect app status quo).

5.3. In the case of "Yes". But the widget is not displayed on the SmartWatch2 devices. Please try the following.
5.3.1. Reconnection of Bluetooth.
5.3.2. Re-pairing.
5.3.3. SmartWatch2 devices Power off / on.
5.3.4. "Reset of Smart Watch" of SmartWatch2 devices menu.

Note: Smart-Connect app, and SmartWatch2 app, and SmartWatch2 device, is not stable.
------
the machine translation of Google.