Slick USB 2 Serial Terminal

Plugged into a GPS chip receiving GSA sentences and after several minutes the application grinds to a hault with 22MB (!!!) RAM usage. Consider culling some of the text output after a while.

I hooked a scale to my Asus TF300T and after some trouble I found the right adapter and it WORKS!!!!

Cannot get this to work on a galaxy 3s and ftdi usb to serial adapter always a problem with the wrong endpoints

Bought a generic OTG cable. Connected it>usb-serial adapter>cisco console cable>c3560, c3750, c3750x and 3850. It also works with OTG cable>usb to macro usb for newer cisco switchs.

It connects but I get a ton of gibberish in my window.

Use a USB on the go adapter and it worked with a USB TO RS485 converter. Also ran the electronics from the USB Supply which was doubled to 10 volts using a capacitor doubler. Circuit took 200mA from the USB port.

Reports that no usb adapter is connected

Does not work with PL2303 dongle.

Extra peace of software, only had to change res to display all buttons. Works as described!

This product is by far the best I have used, and is so close to being perfect. But there is one major flaw that makes it impossible for me to use. It seems the app likes to auto-capitalize the first letter typed. I haven't tested software keyboards but with a USB keyboard there is no way to not send a capital letter. This normally wouldn't be an issue, but in the case of typing a password to access my Cisco switch that now becomes impossible.

Two Thumbs up... a must have for Network Administrator..(using ASUS K01N)

Very nice but I have the same issue as Matthew Miller in that the bluetooth keyboard interferes with the operation of the USB serial port connected to my OTG adapter. I saw this with another app also, so I suspect that there is something buggy in the underlying API in use that causes the issue to surface (both are technically serial devices), so may not be a lot the author can do. FYI: Samsung SM-T700 with a Samsung EJ-CT700 Bluetooth keyboard running stock Samsung Android 5.0. Seems to work without it but the keyboard popup scrolls the text on the screen away, making it hard to use.

The only one that the driver works fine and it is easy to use. Great for NMEA tester.

IT NOT WORKS IN MY HTC DESIRE DUAL SIM 600 ANDROID PHONE.I BUY THE APPLICATION .WHEN I MAIL REGARDING TO GIVE SUPPORT TO THE DEVELOPER MAIL BOUNCE AND RETURN PERMANENTLY ..... DONT BUT IT ....NO SUPPORT FROM DEVELOPER

Works fine when using soft-keyboard (but then I have no D-pad to use arrows) but then breaks and can't find the adapter when I connect a bluetooth keyboard.

Takes a few minutes to recognise the USB serial cable, but once it does it works well. Was able to load a config file onto a Cisco router using this app.

The ads cover part of the user interface, leaving the app less usable.

Will not work with Samsung S4. I can connect with prolific but only get The hour prompt. Trying to connect to cisco device. Using same cables I can connect by way of pc and putty. I tried a Google nexus 7 and Motorola Droid Maxx HD and the devices can't even see the adapter unlike the Samsung s4. Any ideas. This would be a 4+ if it worked.

Shows connected with Prolific (Belkin USB Serial) but does not return any text from the serial device. Any suggestions? would love to get this to work on my droid maxx 4.0.4.

The only one that the driver works fine and it is easy to use. Great for NMEA tester.

it works great i love easy to use and look good easy on the eyes

Excellent App, a must have for Network Adminstrator. Btw, im using asus k012

I love this. Thank you!

This app is extremely useful for any admins out there. I was able to console into devices very well!

Working in marine electronics this is a real useful tool to read NMEA 183 and other marine equipment. Another nail in the MS coffin! Asus EEE Transformer Prime.

Currently writing this review while connected to a Riverbed Steelhead device and my Transformer Prime. Quite simple and literally plug and play. Using a Trendnet TU-S9 USB to Serial adapter.

I send some mail to developer company different times in 2 weeks there is no response.

I just tried this out on my A500 (running Honeylicious 3.2.1) and it lets my tablet act similar to the Arduino IDE's serial monitor. It works right off the bat without a glitch. 5 stars!

Confirmed works with galaxy nexus and prolific usb to serial cable with Juniper network equipment as well as the Texas Instruments Stellaris boards (115k baud and prolific driver).

the theme for the app needs to be updated

I use it for serial console on aix servers and it's great!

works extremely well with nexus 7 and OTG usb cable

I'm running ICS 4.0.4 official firmware on galaxy tab 10.1 GT-P7500. Tested it with Cisco devices and its working great.

Good unlike 20 others it really works. Bad it only works to 9600

Does its job. Works fine for connecting into servers. NetApp, Cisco, IBM, etc

Helps with programming micrcontrollers

This app is good as basic terminal. It does not support vt100 emulation and function keys.

Not what I'm looking for.

works great on Nexus 7 to console Cisco devices! my only problem is that the dictionary input is always getting in the way. Just hope that the input is in real time so that when i press "space bar" the view will automatically scroll. Or maybe i just missed that option on the app. But still works great!

We are using this app to update control boards in the field. We have solar battery operated streetlights and we are excited to be able to use this app to talk to our poles. We are even more excited that we were able to buy a cheap tablet to have our maintenance crew use. The tablet may be cheap, but it works and it does everything we need it to do. Confirmed App works on Noria T2 7" Tablet by Chromo Inc. On a side note: The only complaint I have about the app is that it skips certain lines and we aren't able to edit that particular line. This happens with my Samsung Tablet, Lenovo Tablet, and the Noria tablet. Thank you for your contribution.