About Satellite director Pro
SatFinder detector pro (Satellite Finder) is a tool which will help you to set up satellite dish. It will give you azimuth, satellite director elevation and LNB tilt for your location (based on GPS) and chosen satellite from list. The result is shown both as numeric data and graphical on google maps. It has also built in compass which will help you satellite director to find proper satellite azimuth. It also can use augmented reality to show satellite director where is satellite on camera tool view.
satfinder tool Finding a TV satellite or an antenna, in azimuth, can be pretty difficult. Before you can find it with a compass you have to do some calculations using GPS location, satellite director magnetic variation, compass azimuth and satellite azimuth.
Satellite Director replaces all of that. See tips satellite director to success below.
satfinder tool Compass works only on satellite director devices with compass sensor satellite director (magnetometer).
How to use this app satfinder tool :
1. First of all, you should enable GPS and Internet on your phone satellite director . Remember – in most cases it is impossible to receive GPS signal inside buildings. So if you want to get very accurate location satfinder tool – please go near windows or go even outside.
In current app version satfinder tool location should be found quite immediately. satellite director So if you stuck with ‘no location’ message please make ensure that you got enabled all required features/permissions satfinder tool .
2. If app found your location, you must select desired satellite. To do this you must find icon with magnification glass and tap it. On the list you will find all satellites with elevation angle above zero degrees satfinder tool. Remember: satellite name doesn’t affect the calculation of angles. Important thing is satellite position.
3. The azimuth, elevation and skew angle is calculated for your location and chosen satellite. Under calculated values there is a compass with graphical representation of azimuth angle. The azimuth angle is calculated with magnetic inclination satellite director . Remember – every time you use compass – you should calibrate it. Green line satellite director your phone azimuth. So if on compass green and red indicators are on each other –satellite director front of the phone should show you direction to the satellite. If the compass value is correct – phone azimuth value will go green satfinder tool .
3 tips to success:
1- do NOT go to close satfinder tool to the iron dish, iron lnb arm or iron pole (keep at least 30 cm distance)
2- calibrate the compass of the phone satellite director by waving it in a figure 8 before you start
3- optional: calibrate the compass satfinder tool of the satfinder tool phone by rolling your phone along its length axis about 2-3 turns (works on some phones)
Dish Pointer supports:
INTELSAT, INMARSAT, TIANLIAN, EUTELSAT, AMC,satfinder tool LUCH, COSMOS, OPTUS, APSTAR, SUPERBIRD, BEIDOU, JCSAT, CHINASAT, PALAPA, AFRICASAT-2, ABS, KIKU-8, MTSAT, MBSAT, KIZUNA, SINOSAT, ST, HIMAWARI-6, EXPRESS-AM, N-STAR, VINASAT, ZHONGXING, COMS, , FENGYUN, GARUDA, ASIASAT, THAICOM, TELKOM, INDOSTAR, KOREASAT, N-SAT, BSAT, ASTRA, NSS, SES, ASIASTAR, EXPRESS, INSAT, KODAMA, YAMAL, TDRS, CHINASTAR, KAZSAT, RADUGA, HORIZONS, GSAT, ESIAFI, TELSTAR, ELEKTRO,satellite director KALPANA, LEASAT, RADUGA-1M, GALAXY, METEOSAT, BONUM, DIRECTV, DP, SKYNET, YAHSAT, SIRIUS, SYRACUSE, AZERSPACE, AFRICASAT, NIMIQ, THURAYA, NIGCOMSAT, TURKSAT, HELLAS-SAT, AKSAT, NATO, ARABSAT, EUROBIRD, DFH, HYLAS, ORIZONT, XTAR, BADR, AMOS, COMSATBW, RADUGA-1, RASCOM, THOR, MSG, NILESAT, HISPASAT, ECHOSTAR, AMAZONAS, GOES, BRASILSAT, STAR, QUETZSAT, VENESAT, XM, ICO, SPACEWAY, SKYTERRA, LES, AMSC, GSTAR, SATCOM, MSAT, ANIK, SOLIDARIDAD, SATMEX, MEXSAT, HGS, CIEL
Thank you for using the app "Satellite Director / SatFinder"
by X####:
How to check detection on camera