Wi-Fi Visualizer
Free App
Advertisements
About Wi-Fi Visualizer
Your device will be "Wi-Fi Analyzer"!
By visualizing the Wi-Fi environment, you can prevent and resolve troubles of Wi-Fi.
It is convenient for site survey (preliminary survey) before introducing wireless LAN, and confirmation of radio wave condition after introduction.
"WiFi Analyzer" can solved the trouble of Wi-Fi. For example, Wi-Fi is slowly, Cannot connect to Wi-Fi, Wi-Fi is connected but cannnot connect to Internet, etc.
Functions:
[Information on connected Wi-Fi]
You can check the status of the currently connected Wi-Fi network.
It is useful for isolating troubles. (For example, Connected to Wi-Fi but cannot connect to the Internet)
Information
- Connection destination (SSID, BSSID)
- Signal strength (RSSI)
- Channel (Frequency)
- Channel Width *Only Android 6.0 or later
- Link Speed
...
Solve when can not connect to the Internet
- Open the web-based setting page of the router.
- Open web authentication page when connected to "public Wi-Fi spot".
[Scan the surrounding Wi-Fi]
You can scan the surrounding Wi-Fi and visualize the congestion of the channel and signal strength as a graph.
It is useful for site survey (preliminary survey) before introduction of wireless LAN.
[Display the Heatmap] * Android 3.0 or later only
You can map the signal strength and Link Speed of the currently connected Wi-Fi network on the floor map and visualize it as a heat map.
It is useful for checking the Wi-Fi condition after introduction.
[Display the Network Map]
Display the current network status as a map.
It is convenient for isolating the cause when you can not connect to the Internet or when it can not communicate with the device.
* This app detects devices by UPnP (SSDP) and ARP table. If device is not supported these protocol, app can not detect the device.
Display the connection status to the Internet
- Check if web authentication page exists
- Time of Ping to web site (google.com).
Display of network devices on Wi-Fi network
- Router
- Switch
- NAS
- PC
...
Open "Web-based setup page"
- You can also open the " Web-based setup page" with the browser by clicking the device.
[Real-Time Chart of Signal Strength]
Periodically, Wi-Fi Visualizer checks the RSSI of the currently connected Wi-Fi, and shows the chart of RSSI in real time.
It is convenient for checking that Wi-Fi Coverage is good in your house.
When installing a new repeater, you can investigate the point that radio waves are decaying. And, after a new repeater was installed, you can check that Wi-Fi roaming is working good.
[Connect to Wi-Fi by WPS] * Android 5.0 or later only
Setup Wi-Fi by 1 Tap. This uses WPS of Android OS, so supporting many devices.
License:
This software includes the work that is distributed in the Apache License 2.0
- Hellocharts-Android ( https://github.com/lecho/hellocharts-android)
By visualizing the Wi-Fi environment, you can prevent and resolve troubles of Wi-Fi.
It is convenient for site survey (preliminary survey) before introducing wireless LAN, and confirmation of radio wave condition after introduction.
"WiFi Analyzer" can solved the trouble of Wi-Fi. For example, Wi-Fi is slowly, Cannot connect to Wi-Fi, Wi-Fi is connected but cannnot connect to Internet, etc.
Functions:
[Information on connected Wi-Fi]
You can check the status of the currently connected Wi-Fi network.
It is useful for isolating troubles. (For example, Connected to Wi-Fi but cannot connect to the Internet)
Information
- Connection destination (SSID, BSSID)
- Signal strength (RSSI)
- Channel (Frequency)
- Channel Width *Only Android 6.0 or later
- Link Speed
...
Solve when can not connect to the Internet
- Open the web-based setting page of the router.
- Open web authentication page when connected to "public Wi-Fi spot".
[Scan the surrounding Wi-Fi]
You can scan the surrounding Wi-Fi and visualize the congestion of the channel and signal strength as a graph.
It is useful for site survey (preliminary survey) before introduction of wireless LAN.
[Display the Heatmap] * Android 3.0 or later only
You can map the signal strength and Link Speed of the currently connected Wi-Fi network on the floor map and visualize it as a heat map.
It is useful for checking the Wi-Fi condition after introduction.
[Display the Network Map]
Display the current network status as a map.
It is convenient for isolating the cause when you can not connect to the Internet or when it can not communicate with the device.
* This app detects devices by UPnP (SSDP) and ARP table. If device is not supported these protocol, app can not detect the device.
Display the connection status to the Internet
- Check if web authentication page exists
- Time of Ping to web site (google.com).
Display of network devices on Wi-Fi network
- Router
- Switch
- NAS
- PC
...
Open "Web-based setup page"
- You can also open the " Web-based setup page" with the browser by clicking the device.
[Real-Time Chart of Signal Strength]
Periodically, Wi-Fi Visualizer checks the RSSI of the currently connected Wi-Fi, and shows the chart of RSSI in real time.
It is convenient for checking that Wi-Fi Coverage is good in your house.
When installing a new repeater, you can investigate the point that radio waves are decaying. And, after a new repeater was installed, you can check that Wi-Fi roaming is working good.
[Connect to Wi-Fi by WPS] * Android 5.0 or later only
Setup Wi-Fi by 1 Tap. This uses WPS of Android OS, so supporting many devices.
License:
This software includes the work that is distributed in the Apache License 2.0
- Hellocharts-Android ( https://github.com/lecho/hellocharts-android)
All Application Badges
Free
downl.
downl.
Android
2.3+
2.3+
Bug
buster
buster
Android app
App History & Updates
What's Changed
- On the list of scan results, the center channel is displayed when the bandwidth is 40 MHz or more.
- Fixed a bug that the bandwidth may not be correct on the graph of scan results.
- Fixed a minor problem.
- On the list of scan results, the center channel is displayed when the bandwidth is 40 MHz or more.
- Fixed a bug that the bandwidth may not be correct on the graph of scan results.
- Fixed a minor problem.
Version update Wi-Fi Visualizer was updated to version 0.0.9
More downloads Wi-Fi Visualizer reached 50 000 - 100 000 downloads
What are users saying about Wi-Fi Visualizer
M
by M####:
by M####:
Best WiFi analyzer and toolpack packed into one super awesome app. Job well done!
M
by M####:
by M####:
После установки 8 МБ, до 7 МБ в ОЗУ. Было нужно для построения тепловых карт покрытия Wi-Fi. Задачу не выполняет: нельзя загрузить в приложение план и, перемещаясь по помещениям, указывать на нем текущие положения.
M
by M####:
by M####:
Incorrect channel width, terrible unintuitive UI, "datas" (whatever it means). Worst WiFi scanner.
M
by M####:
by M####:
Full and perfect tnx
M
by M####:
by M####:
It *looks* great, but I literally just downloaded it! I need to try it for a while! It does need to be able to move it to the SDCard, because it's huge (12+㎆)! There are other apps w/same feature-set,*excl.* heatmap that are the same size, but they can be moved to SDCard.
M
by M####:
by M####:
Close, but no cigar. With a few improvements here and there, this can be a 5 star app. Just wish it had all the same features as farproc's Wifi Analysiser. It already has a few cool things that farproc's doesn't, just hope future updates add the same functionality and more. ????
by Q####:
Expertly executed and well organized feature-set that is far beyond anything I've seen on Android.