Remote Release
Free App
Advertisements
About Remote Release
Remote Release allows you to "remote release" your Canon EOS DSLR from your Android device with only a USB cable.
Wi-Fi support is also present, if your camera supports Wi-Fi or you are using a go-between like the MR3040 - see further details on the DSLR Controller website ( http://dslrcontroller.com/ ) on how to setup the Wi-Fi connection.
*** PLEASE READ THE ENTIRE DESCRIPTION ***
*** IF YOUR DEVICE IS NOT COMPATIBLE THIS IS NOT MY OR THE SOFTWARES FAULT - YOUR PHONE IS MISSING NEEDED SOFTWARE OR HARDWARE ! ***
Remote releasing is using a remote control to activate the shutter of the camera. This is to prevent shaking the camera, and is often used with bulb shots and/or tripods.
This app is the little (free) brother of DSLR Controller; see http://dslrcontroller.com/ and https://play.google.com/store/apps/details?id=eu.chainfire.dslrcontroller
Remote Release also has a discussion thread on XDA-Developers.com:
http://forum.xda-developers.com/showthread.php?t=1369684
---- Features ----
- Activate the camera's shutter button from your phone over USB, just like using a remote release cable
- Enable/Disable Auto-Focus *
- Support for bulb shots (hold shutter button) *
- Support for continuous shooting (hold shutter button) *
* Depends on camera model. Requires a DryOS based camera. See DSLR Controller's device compatibility page ( http://dslrcontroller.com/devices.php )
---- Requirements ----
- An Android device with an ARMv7-A or newer CPU architecture (virtually all 1ghz+ devices)
- Supported Canon EOS DSLR
When connecting over USB:
- Not rooted: Android 3.1 or higher with USB host kernel+API support **
- Rooted: Android 2.3.1 or higher with USB host kernel support **
- The correct USB adapter, if applicable
** USB host kernel support can usually be determined by connecting a USB stick to your device, and seeing if the device recognizes it.
---- Devices ----
Please see DSLR Controller's supported devices page ( http://dslrcontroller.com/devices.php ) for device compatibility information.
----- Usage -----
-- Getting started --
- Install the application.
- Connect your camera to the phone/tablet, and turn it on. Half-press the shutter button if it was already on.
- If a popup comes up that offers to open Remote Release, press it, and move on to "Operation" below.
- If a popup does not come up, manually start Remote Release. A Superuser popup should appear, click allow. If this took more than a few seconds, Remote Release will complain it cannot find a camera, regardless if you have one connected or not. Exit the app, half-press the shutter button on the camera, then restart the app.
- If a popup appears that tells you your device is not compatible, this is the end of the line for you.
-- Operation --
After you have connected your camera and started the app, the app will show you the following:
- Camera model
- Current shutter setting (depending on camera mode)
- Current aperture setting (depending on camera mode)
- Current ISO setting (depending on camera mode)
- Current drive mode setting
Below that you will see three buttons:
- Auto-Focus button
- Shutter button
- Button to open DSLR Controller in the Market
If your lens is set to Auto-Focus and you are using a DryOS based camera, you can use the Auto-Focus button to select if focusing is triggered by pressing the shutter button. By default it is, but it is not always desired. If your lens is set to Manual-Focus, this setting has no effect.
Pressing the shutter button will take a picture on your camera. If the camera is set to bulb mode or to continuous shooting, press-and-hold the shutter button - the bulb/continuous capture will stop once you remove your finger from the screen.
Wi-Fi support is also present, if your camera supports Wi-Fi or you are using a go-between like the MR3040 - see further details on the DSLR Controller website ( http://dslrcontroller.com/ ) on how to setup the Wi-Fi connection.
*** PLEASE READ THE ENTIRE DESCRIPTION ***
*** IF YOUR DEVICE IS NOT COMPATIBLE THIS IS NOT MY OR THE SOFTWARES FAULT - YOUR PHONE IS MISSING NEEDED SOFTWARE OR HARDWARE ! ***
Remote releasing is using a remote control to activate the shutter of the camera. This is to prevent shaking the camera, and is often used with bulb shots and/or tripods.
This app is the little (free) brother of DSLR Controller; see http://dslrcontroller.com/ and https://play.google.com/store/apps/details?id=eu.chainfire.dslrcontroller
Remote Release also has a discussion thread on XDA-Developers.com:
http://forum.xda-developers.com/showthread.php?t=1369684
---- Features ----
- Activate the camera's shutter button from your phone over USB, just like using a remote release cable
- Enable/Disable Auto-Focus *
- Support for bulb shots (hold shutter button) *
- Support for continuous shooting (hold shutter button) *
* Depends on camera model. Requires a DryOS based camera. See DSLR Controller's device compatibility page ( http://dslrcontroller.com/devices.php )
---- Requirements ----
- An Android device with an ARMv7-A or newer CPU architecture (virtually all 1ghz+ devices)
- Supported Canon EOS DSLR
When connecting over USB:
- Not rooted: Android 3.1 or higher with USB host kernel+API support **
- Rooted: Android 2.3.1 or higher with USB host kernel support **
- The correct USB adapter, if applicable
** USB host kernel support can usually be determined by connecting a USB stick to your device, and seeing if the device recognizes it.
---- Devices ----
Please see DSLR Controller's supported devices page ( http://dslrcontroller.com/devices.php ) for device compatibility information.
----- Usage -----
-- Getting started --
- Install the application.
- Connect your camera to the phone/tablet, and turn it on. Half-press the shutter button if it was already on.
- If a popup comes up that offers to open Remote Release, press it, and move on to "Operation" below.
- If a popup does not come up, manually start Remote Release. A Superuser popup should appear, click allow. If this took more than a few seconds, Remote Release will complain it cannot find a camera, regardless if you have one connected or not. Exit the app, half-press the shutter button on the camera, then restart the app.
- If a popup appears that tells you your device is not compatible, this is the end of the line for you.
-- Operation --
After you have connected your camera and started the app, the app will show you the following:
- Camera model
- Current shutter setting (depending on camera mode)
- Current aperture setting (depending on camera mode)
- Current ISO setting (depending on camera mode)
- Current drive mode setting
Below that you will see three buttons:
- Auto-Focus button
- Shutter button
- Button to open DSLR Controller in the Market
If your lens is set to Auto-Focus and you are using a DryOS based camera, you can use the Auto-Focus button to select if focusing is triggered by pressing the shutter button. By default it is, but it is not always desired. If your lens is set to Manual-Focus, this setting has no effect.
Pressing the shutter button will take a picture on your camera. If the camera is set to bulb mode or to continuous shooting, press-and-hold the shutter button - the bulb/continuous capture will stop once you remove your finger from the screen.
All Application Badges
Free
downl.
downl.
Android
2.2+
2.2+
Android app
App History & Updates
What's Changed
Update DSLR library to latest version
Update DSLR library to latest version
Version update Remote Release was updated to version 1.33
Version update Remote Release was updated to version 1.31
Version update Remote Release was updated to version 1.30
Name changed Name changed! Remote Release (USB) now is known as Remote Release.
What are users saying about Remote Release
G
by G####:
by G####:
Worked a charm. I used a Pixel XL, with the supplied USB C to USB A adaptor, into the mini USB socket on my Canon D60.
C
by C####:
by C####:
Camera autofocus only onces after that it's not autofocusing
C
by C####:
by C####:
I saved $$$ by using an OTG cable I had at home instead of buying a remote. Awesome app!
F
by F####:
by F####:
I haven't used it yet, but the DEV is awesome so I'm confident that it works just fine.
C
by C####:
by C####:
First, I must applaude the creator for doing an astounding reverse engineering job. My 5D Mark II is easily recognized by the program installed on Samsung Galaxy S3. The program can operate the focus and the shuter release. However, it is pretty much unusable for the bulb mode. The shutter is always closed prematurily. I was unable to reach even 6 sec. It would be better if shutter were closed on a second press. Another problem is that application freezes when the camera drive mode is time delayed.
H
by H####:
by H####:
At first I think my device is not compatible with this app, but after loading for a few minutes, my device can detect and connected to my camera, I was installed this app just for a test, because I want to buy dslr controller app. Device tested: Galaxy Tab 2 7" & Canon 1000D (Rebel XS) Thanx for this app :)
R
by R####:
by R####:
Even if the shutter is set to Bulb mode on canon 600d, the photo is taken in normal shutter. The app is installed on moto-G. Everything else works fine except for bulb mode.
C
by C####:
by C####:
It detects my camera, but it tells me to turn my camera on / off and reconnect then restart the app. It detects it again and does the same thing. Either that or the screen just stays black.
C
by C####:
by C####:
It won't shoot a Canon 400D in bulb mode. Can you fix it or it's a limitation with this old camera model?
D
by D####:
by D####:
I've read other reviews about the Nexus 7 not recognizing the camera. I'm really sad about this because I really wanted this to work, but I guess the rumors are true. If you have a nexus 7 or Nexus 7 2013, beware. The only thing the developers stated was that it was the devices fault. This is a major bug and I like to see some movement to have it fixed
O
by O####:
by O####:
Works as it should do on with my 550D.
V
by V####:
by V####:
The app works with my OnePlus One and 700D, however bulb mode doesn't...
C
by C####:
by C####:
BIDADARI MALAYSIA
G
by G####:
by G####:
myanmar
C
by C####:
by C####:
I haven't used it yet, but the DEV is awesome so I'm confident that it works just fine.
V
by V####:
by V####:
Best remote app. Simple & easy interface.
C
by C####:
by C####:
Will there be future support for this camera?
O
by O####:
by O####:
It connects but won't take a picture. I can change camera settings, but not release the shutter. I tried others that work better.
S
by S####:
by S####:
Screen just stays black after connecting to my camera. Doesnt work with s4/canon70D i guess.
Q
by Q####:
by Q####:
Its very simple remote there should be option for timelaps option
R
by R####:
by R####:
Does not work with 70D wifi
H
by H####:
by H####:
This app works with Xperia M and Canon 700D.
P
by P####:
by P####:
Please discover a version for Lg optimus G pro f240l
Q
by Q####:
by Q####:
Works with Samsung Note 8.0 and Cannon EOS 600D
X
by X####:
by X####:
Work perfect from nexus to 70D
C
by C####:
by C####:
My camera doesn't have the WiFi functionality, but with a mini USB data cable and a USB OTG cable it works perfectly. The mini USB cable being data capable is essential. I got really frustrated once because I was using the most basic mini USB cable it and the phone would recognize the camera but nothing would show up on the screen, so if you have the same issue you need to get the right cord.
C
by C####:
by C####:
Works perfectly. I am able to take photos as well as see the photos on the camera in my Android Device. Will buy the full version.
C
by C####:
by C####:
Does not work on my Sony Xperia Z2 tablet
U
by U####:
by U####:
Does not work with canon 40d and tab2 10.1
C
by C####:
by C####:
Works great with HTC one max
C
by C####:
by C####:
Works good
K
by K####:
by K####:
works greatly!!
C
by C####:
by C####:
I use xperia S and eos 7D. When I use it in bulb mode,no matter how long I hold the button the shutter speed is only 1 sec. If anyone know the solution please email me at haowushu@gmail.com
C
by C####:
by C####:
This app would be perfect if the bulb feature worked. With my Galaxy S3 using a Canon 1100D it just triggers and releases as soon as I put my finger on the button rather than waiting until I lift my finger to release the shutter.
C
by C####:
by C####:
DOES EXACTLY WHAT IT SAYS!!!! Works Brilliantly using a Google Nexus 7 and a Canon 550D.... If they added a Shutter Release timer button for long exposures I'd pay money for it!!!
U
by U####:
by U####:
Make sure you're using a quality cable
M
by M####:
by M####:
Is there an upgrade for this? thanks.
O
by O####:
by O####:
Good perfomence s4
U
by U####:
by U####:
First, I must applaude the creator for doing an astounding reverse engineering job. My 5D Mark II is easily recognized by the program installed on Samsung Galaxy S3. The program can operate the focus and the shuter release. However, it is pretty much unusable for the bulb mode. The shutter is always closed prematurily. I was unable to reach even 6 sec. It would be better if shutter were closed on a second press. Another problem is that application freezes when the camera drive mode is time delayed.
by Q####:
Works perfect and unlike other apps you can shoot in RAW. Only downside is id like to be able to out live view on my phone screen but as far as a cable release goes.... work great. Thank you