Bluetooth Control BT->uC PRO
$2.40About Bluetooth Control BT->uC PRO
+++Here you can now find some example code for Arduino projects:
http://www.helixhackers.net/uBt-uTCP-Arduino-examples.zip
This is the one app to control everything you want to!
With µBT-Control you can control every serial Bluetooth device you want!
There are many interfaces to send data out from your Android device to any other device.
Tab 1 showes you every bound Bluetooth device and every device which is in range. With a click you can connect to every device you want. You are connected and you want to set this connection to default, click at default device and the App tries to connect to this device at startup.
Tab 2 brings the serial terminal view. You can chat with your friend or send custom data to your device. You also can see only Rx or Tx data.
In Tab 3 you can set the commands which will be send over Bluetooth if an interaction with the interface is started. You can create as much profiles as you want to! You are also able to set one of them as your default profile which will be loaded at startup.
There are Buttons, CheckBoxes, RadioButtons, SeekBars (horizontal and vertical), Joysticks and a ColorPicker. Every message can set individually and you are able to create different profiles to save and restore these configurations whenever you want!
Tab 4 is the main control interface if you are connected to a serial Bluetooth device. Now you can send messages or control commands if you set them in your current profile. You can also create commands to select them from the Spinner and send them whenever you want.
Joysticks are available in Tab 5. You can use them to control a RC-Car or a small robot. The message of every direction will be sent if you change the direction to it.
You want to control the light color in your bedroom? No problem Tab 6 offers you a full free programmable ColorPicker to send the messages and the color over Bluetooth, you can also send the brightess if you want to. You are able to control up to 4 different lamps. You can set them together to one color (set the ToggleButton to the CheckBoxes), or set every lamp to a different color (ToggleButton to the RadioButtons).
You can now set every byte you want to send with the code #XXX were XXX is a three character long DECIMAL number of byte from 000 up to 255. In this way you can send single bytes without knowing the ASCII character. If you want to put only a hashtag sign simple put a second hash character in the EditText field ##. If you done all right the command text should be green, if not it will be red and not send over seriel bluetooth.
In the app you can find many Arduino example projects with code and schematic. You can also check the online help site directly from the app.
Many applications with Arduino and the Bluetooth modules for this boards can controlled with this App! Tested with Arduino UNO and Arduino MEGA2560. Also self created layouts and PCB with any of this modules can controlled. It's very easy, you only need Rx, Tx and Ground to make your application
RC-Controlled. If you are not sure which one you should buy, feel free to contact me!
This App is tested on many Bluetooth modules like BL600, BL900, BTM222, HC-04, HC-05 and so on...
This App works with any Bluetooth modules. If you have any questions please check the help text under Settings -> Help
-Dennis
http://www.helixhackers.net/uBt-uTCP-Arduino-examples.zip
This is the one app to control everything you want to!
With µBT-Control you can control every serial Bluetooth device you want!
There are many interfaces to send data out from your Android device to any other device.
Tab 1 showes you every bound Bluetooth device and every device which is in range. With a click you can connect to every device you want. You are connected and you want to set this connection to default, click at default device and the App tries to connect to this device at startup.
Tab 2 brings the serial terminal view. You can chat with your friend or send custom data to your device. You also can see only Rx or Tx data.
In Tab 3 you can set the commands which will be send over Bluetooth if an interaction with the interface is started. You can create as much profiles as you want to! You are also able to set one of them as your default profile which will be loaded at startup.
There are Buttons, CheckBoxes, RadioButtons, SeekBars (horizontal and vertical), Joysticks and a ColorPicker. Every message can set individually and you are able to create different profiles to save and restore these configurations whenever you want!
Tab 4 is the main control interface if you are connected to a serial Bluetooth device. Now you can send messages or control commands if you set them in your current profile. You can also create commands to select them from the Spinner and send them whenever you want.
Joysticks are available in Tab 5. You can use them to control a RC-Car or a small robot. The message of every direction will be sent if you change the direction to it.
You want to control the light color in your bedroom? No problem Tab 6 offers you a full free programmable ColorPicker to send the messages and the color over Bluetooth, you can also send the brightess if you want to. You are able to control up to 4 different lamps. You can set them together to one color (set the ToggleButton to the CheckBoxes), or set every lamp to a different color (ToggleButton to the RadioButtons).
You can now set every byte you want to send with the code #XXX were XXX is a three character long DECIMAL number of byte from 000 up to 255. In this way you can send single bytes without knowing the ASCII character. If you want to put only a hashtag sign simple put a second hash character in the EditText field ##. If you done all right the command text should be green, if not it will be red and not send over seriel bluetooth.
In the app you can find many Arduino example projects with code and schematic. You can also check the online help site directly from the app.
Many applications with Arduino and the Bluetooth modules for this boards can controlled with this App! Tested with Arduino UNO and Arduino MEGA2560. Also self created layouts and PCB with any of this modules can controlled. It's very easy, you only need Rx, Tx and Ground to make your application
RC-Controlled. If you are not sure which one you should buy, feel free to contact me!
This App is tested on many Bluetooth modules like BL600, BL900, BTM222, HC-04, HC-05 and so on...
This App works with any Bluetooth modules. If you have any questions please check the help text under Settings -> Help
-Dennis
All Application Badges
Paid
app
app
Android
3.0+
3.0+
Android app
App History & Updates
What's Changed
The joysticks can now be analog or digital. So it is possible to send X and Y values from the joysticks to your roboter or something else.
Big GUI improvement and some small bugfixes.
The joysticks can now be analog or digital. So it is possible to send X and Y values from the joysticks to your roboter or something else.
Big GUI improvement and some small bugfixes.
More downloads Bluetooth Control BT->uC PRO reached 100 - 500 downloads
Version update Bluetooth Control BT->uC PRO was updated to version 1.9.4
More downloads Bluetooth Control BT->uC PRO reached 50 - 100 downloads
Price update Price changed from $1.22 to $2.40.
What are users saying about Bluetooth Control BT->uC PRO
F
by F####:
by F####:
This is a very well thought out application for anyone wishing to implement the Bluetooth SPP (Serial Port Profile) standard to emulate a RS-232 or UART interface. With functionality ranging from a CLI to a colour picker to manage an RGB LED, the developer is spoilt for choice. Highly customisable & with the ability to store configurations, this is the ideal companion to anyone working with micro-controller boards such as the Tessel, Arduino or Raspberry Pi. Currently awaiting its upgrade to Bluetooth 4x, the application is at least guaranteed to work with the HC-05 Bluetooth transceiver which means you can use it in any electronics project. Finally, a rarity amongst the plethora of applications to be found in the Play Store these days, is unparalled & immediate support from the Developer.
P
by P####:
by P####:
I just don't know how yo change the baud rate
S
by S####:
by S####:
Had high hopes for this app. It doesn't come with default values and crashes when you try to create a profile. The effect is that you have to configure all the keys every time you start the app after it's been closed. it renders it unusable. While only a dollar, I'm hoping this review will get the developer's attention to fix a blocking bug.
S
by S####:
by S####:
If you need to control an arduino or similar project/robot/automation, this app is very useful, lots of options for control and well put together. Highly recommended. Excellent support from dev also.
by K####:
Good app. I would like to be able to rename the buttons and possibly configure the appearance.