MIST智慧魔音灯

一、开机
1.设备插上电源，按power键开机，设备亮白灯，约2秒后闪蓝灯进入待配置状态。
2.在待配置状态，碰触设备灯会变成白色，1-2秒恢复闪蓝灯状态
二、客户端安装、注册、登陆
1. 手机端通过扫描说明书或彩盒上APP 下载二维码来下载安装客户端，或可通过google play store搜索MIST来下载安装客户端。
2. 打开手机端APP，点击界面注册按钮，在服务器上注册账号。
3. 输入注册成功的账号和密码登陆。
三、设备添加、删除设备、设备恢复出厂设置
1.在仓库界面点击添加设备，可选择手动添加或扫描二维码添加。
（1）手动添加：可以手动输入设备底部MAC地址来配置设备，此方法为方便不带照相机功能的手机、平板或其他产品使用MIST。
（2）扫描二维码：扫描设备底部二维码来配置设备。
（3）设备添加成功后会在仓库界面显示设备图标及设备名称
（4）设备正在连接WIFI时蓝灯长亮，配置成功后，长亮白灯，手机端提示配置成功。
（5）如有配置失败时，手机端提示配置失败，设备灯光继续闪蓝灯。用户可以检查WIFI密码是否输错或重启设备后再重新配置。
（6）设备随配随用
2.删除设备：
（1）设备在线时删除：在仓库界面长按设备图标，界面会显示垃圾桶，把图标拖进垃圾桶，设备就会在服务器及手机界面解除绑定。设备删除成功后，灯变为蓝灯闪。
（2）设备不在线时删除：在仓库界面长按设备图标，界面会显示垃圾桶，把图标拖进垃圾桶。当设备上电后会尝试去连接之前的网路，如果网路已不存在或连接不上，约60秒设备直接进入配置状态，蓝灯闪。如果尝试网络连接成功，设备上报服务器时，服务器“告诉”设备该设备已被删除，约10秒设备进入带配置状态，蓝灯闪。
3.设备恢复出厂设置：同时按住开关键 + 音量加键， 按3-5秒松开。设备断电，按POWER键开机，设备处于待配置状态，配置成功后覆盖之前的设备图标。

四、灯光控制
1.设备配置成功后，长亮白灯，APP端连接设备必须检测设备灯光状态
2.灯光开关按键控制彩灯与色温灯开关
3.彩灯与色温灯调节不能有延时或无效控制
4.色温往左调节渐变黄灯，往右调节渐变白灯

五、音乐下载、播放、删除
1.切换到歌曲界面，获取两个歌曲列表，手机内歌曲列表和设备SD卡歌曲列表。黑色图标表示当前歌曲列表。
2.手机歌曲列表后有下载按钮，用户可点击下载按钮把歌曲下载到设备SD卡内，已经下载成功的显示已下载
3.歌曲下载成功后会自动播放，并且在SD卡歌曲列表里显示，但如果有另一首歌曲在下载时歌曲会停止播放
4.歌曲下载时间：Local TBC, remote TBC
5.歌曲下载只要不退出APP，可以在后台下载，一旦退出APP，歌曲会停止下载。
6.刷新按钮可以刷新SD卡歌曲列表
7.SD卡存储空间不足时，提示用户需要释放空间
六、电源管理：电量分七种状态，无、一格、二格、三格、四格、五格、正在充电。
七、OTA升级：
1.app 升级：手机打开APP,检测服务器是否有新版本。提示用户是否需要升级。
2.设备端一旦连接网络，就会到服务器上检测是否有新版本，并下载到设备本地，当手机连接设备时提示用户设备有新版本是否需要升级。
八、SmartHome UI
1.创建房间
2.拖动设备到房间，设备图标在房间显示，仓库里的图标消失。调整设备在房间位置
3.创建情景模式：但用户添加多个设备时，并且分布在不同的房间，用户可通过创建情景模式来同时操控多个或所有设备，包括设置灯光和音乐播放操控。
4.删除房间里设备，设备图标重新显示在仓库
九、按键定义
1.音乐播放/暂停按键
2.长按3秒为上一曲/下一曲功能。短按为音量+-功能
3.POWER键，长按3秒放开为关机，短按开机
4.Reset孔，用于设备死机，不能按power键关机时断电池用。
5.TF 卡槽，支持最大容量为32G
十一、触控功能：轻拍设备底座或震动时，设备灯光会变化，
第一次变白灯亮度30%、第二次白灯亮度60%、第三次白灯亮度100%、第四次灯灭。每次拍的动作需间隔2秒，间隔时间太短设备将忽略此次操作。
如果拍了一次后手机端有调节彩灯，那么下次再拍时设备又从30%开始。 First, boot
1. Plug in the power equipment, press power button to boot, equipment white light, about two seconds after the flashing blue light to enter the state to be configured.
2. be configured state, touch the device light will turn white, blue lights flashing 1-2 seconds to restore the state
Second, the client installation, registration, login
1. The mobile terminal by scanning the specification or box APP dimensional code to download and install the download client, or to download and install the client through the google play store search MIST.
2. Open the mobile terminal APP, click on the Register button interface on the server registered account.
3. Enter successfully registered account and password.
Third, the device is added, remove the device, restore the device to factory settings
1. In the warehouse interface, click Add Device, choose to manually add or scan two-dimensional code added.
(1) manually add: You can manually enter the MAC address of the bottom to configure the device, this method is not easy with a camera-enabled mobile phone, tablet or other product MIST.
(2) two-dimensional code scanning: scanning equipment at the bottom of the two-dimensional code to configure the device.
(3) The device will display the device icon and the device name in the warehouse interface after successfully added
(4) When the device is connected to WIFI long bright blue light, after the configuration is successful, a long white lights, the mobile phone side, the configuration was successful.
(5) if any configuration fails, the phone side configuration fails, the device lights continue to flash blue lights. The user can check if the wrong password WIFI or reboot the device and then reconfigured.
(6) Equipment with the distribution with the use
2. Remove the device:
(1) The device is online when Delete: press equipment in the warehouse icon interface, the interface will show the trash, the icon is dragged into the trash, the device will be in the server and the mobile phone interface unbind. After the device is deleted successfully, light turns blue lights flashing.
(2) The device is not online Delete: press equipment in the warehouse icon interface, the interface will show the trash, the icon is dragged into the trash. When the device tries to connect to power before the network, if the network is not present or not connected, about 60 seconds the device directly into the configuration state, blue lights flashing. If you try the network connection is successful, the device reporting server, "told the" apparatus of this device has been removed, about 10 seconds into the tape device configuration status, blue lights flashing.
3. To restore the device to factory settings: Hold down the start key + volume up key, press 3-5 seconds and release. Equipment off, press the POWER button to turn the device to be configured in the state, after a successful overlay icon to configure the device before.

Fourth, lighting control
1. After successful configuration, long white lights, APP connected device must detect device status lights
2. The light switch button control lights and color temperature light switch
3. The lamp lights and the color temperature adjustment can not have delays or invalid control
4. yellow gradient color temperature adjustment left, right to adjust the gradient of white light

Five music download, play, delete
1. Switch to the song interface, access to both the list of songs, song list and the phone device SD card song list. Black icon indicates the current song list.
2. After downloading the song list phone buttons, the user can click on the download button to download songs to SD card in the device, it has been downloaded successfully display downloaded
3. The song will automatically play after successfully downloaded and displayed a list of songs in the SD card, but if there is another song while downloading songs will stop playing
4. song download time: Local TBC, remote TBC
5. download songs they do not quit APP, can be downloaded in the background, when you quit APP, the song will stop downloading.
6. Refresh button to refresh the list of songs SD Card
7.SD card storage space is insufficient, prompting the user needs to free up space
Sixth, power management: seven kinds of state power points, no, a grid, two, three, or four cells, five cells, is being charged.
Seven, OTA upgrade:
1.app upgrade: the phone is open APP, detecting whether the server has a new version. Whether users are prompted to upgrade.
2. Once connected to the network device side, on the server will detect if a new version, and downloaded to the device locally connected device when the phone prompts the user equipment needs to be upgraded if the new version.
Eight, SmartHome UI
1. Create a room
2. Drag the device to the room, the device icon is displayed in the room, warehouse icon disappears. Adjust the position of the device in the room
3. Create a profile: But when a user adds multiple devices, and distributed in a different room, the user can create a profile to simultaneously manipulate multiple or all devices, including setting up lights and music playback control.
4. Delete room equipment, warehouse equipment icon reappears
Nine, key definition
1. Music Play / Pause button
2. Press three seconds of the song / next song function. Short press the volume + - function
3.POWER key, long press 3 seconds release for the shutdown, press the power
4.Reset hole for equipment crash, off the battery can not be turned off by pressing the power button.
5.TF card slot, support maximum capacity of 32G
XI touch function: Pat base or shake the device, the device lights will change,
The first white lamp brightness 30%, the second white light brightness 60%, the third white light brightness of 100%, the fourth lamp. Every action taken at an interval of 2 seconds, the time interval is too short device will ignore this operation.
If the shot after the first end of the phone have to adjust lights, then the device and from 30% at the start to make another next time.