Machinist Helper Full
$9.99
Advertisements
About Machinist Helper Full
Machinist Helper (Full Version) is an easy tool that will give you an edge over your competition by helping you increase productivity. You can efficiently avoid calculation mistakes, extend tool life, and optimize cutting conditions.
Functionalities:
Convert Units:
• Length
• Cutting speed
• Volume
• Power
• Pressure
• Angle
• Temperature
• Weight
• US Gallon / Liter
• Decimal / Fractional
• Drill Number / Decimal
• Drill Letter / Decimal
• Torque – in-lbs / N-m
• Thrust – lbf / N
• Angle : Decimal deg to d/m/s
• Taper/Foot To Angle
Drilling:
• Find Drill For Tap
• RPM
• Cutting Speed
• Feed / Rev 1,2
• Feed / Minute
• Material Removal Rate
• Thrust
• Torque
• Power
• Time 1,2
• Drill Point Length
• Dwell period per revolution
• Feeds and speeds tables.
Turning:
• RPM
• Cutting Speed
• Feed / Rev And Minute
• Material Removal Rate
• Power
• Theoretical Surface Roughness
• Facing and Turning Cutting Time
• Feeds and speeds tables.
Milling:
• RPM
• Cutting Speed
• Feed / Tooth (or Rev) And Minute
• Material Removal Rate 1,2
• Power
• Approach Distance
• Cutting Time
• Overtravel Distance
• Engagement Angle
• Effective Dia of Ball Nose Tool
• Scallop Height
• Theoretical Surface Roughness For Ball Nose Tool 1,2
• Radial Chip Thinning
• Axial (Ball Nose) Chip Thinning
• Feedrate Adjustment For Arcs
• Bolt Circle Calculator
• Tap Feed Per Minute
• Shaft and Bore Keyway
• Feeds and speeds tables.
Threading:
• UN Thread Form Data
• UN Threads – Class 2
• M Profile Thread Data
• Metric Threads – Class 6H/6g
• Buttress Thread Data (7°/45°_ANSI B1.9-1973 [R2007] )
• Buttress Thread - Class 2 (7°/45°_ANSI B1.9-1973 [R2007] )
Geometry:
• Right Triangle
Measuring and Inspection
• Sine Bar
• True Position
Miscellaneous
• Shaft and Housing Fitting for Ball and Roller Metric Bearings
1. Pebble support may be removed from this application without any further notice.
Workingbytes4u is not responsible for a content of this chat room.
Permission to access Bluetooth is only required for the “Pebble Watch“.
Calculations are done in imperial and metric system.
The results that this calculator formulates are theoretical in nature and intended solely as an aid. The user agrees to accept full responsibility to verify that the calculated results meet their requirements before using them. WORKINGBYTES4U assumes no responsibility.
Functionalities:
Convert Units:
• Length
• Cutting speed
• Volume
• Power
• Pressure
• Angle
• Temperature
• Weight
• US Gallon / Liter
• Decimal / Fractional
• Drill Number / Decimal
• Drill Letter / Decimal
• Torque – in-lbs / N-m
• Thrust – lbf / N
• Angle : Decimal deg to d/m/s
• Taper/Foot To Angle
Drilling:
• Find Drill For Tap
• RPM
• Cutting Speed
• Feed / Rev 1,2
• Feed / Minute
• Material Removal Rate
• Thrust
• Torque
• Power
• Time 1,2
• Drill Point Length
• Dwell period per revolution
• Feeds and speeds tables.
Turning:
• RPM
• Cutting Speed
• Feed / Rev And Minute
• Material Removal Rate
• Power
• Theoretical Surface Roughness
• Facing and Turning Cutting Time
• Feeds and speeds tables.
Milling:
• RPM
• Cutting Speed
• Feed / Tooth (or Rev) And Minute
• Material Removal Rate 1,2
• Power
• Approach Distance
• Cutting Time
• Overtravel Distance
• Engagement Angle
• Effective Dia of Ball Nose Tool
• Scallop Height
• Theoretical Surface Roughness For Ball Nose Tool 1,2
• Radial Chip Thinning
• Axial (Ball Nose) Chip Thinning
• Feedrate Adjustment For Arcs
• Bolt Circle Calculator
• Tap Feed Per Minute
• Shaft and Bore Keyway
• Feeds and speeds tables.
Threading:
• UN Thread Form Data
• UN Threads – Class 2
• M Profile Thread Data
• Metric Threads – Class 6H/6g
• Buttress Thread Data (7°/45°_ANSI B1.9-1973 [R2007] )
• Buttress Thread - Class 2 (7°/45°_ANSI B1.9-1973 [R2007] )
Geometry:
• Right Triangle
Measuring and Inspection
• Sine Bar
• True Position
Miscellaneous
• Shaft and Housing Fitting for Ball and Roller Metric Bearings
1. Pebble support may be removed from this application without any further notice.
Workingbytes4u is not responsible for a content of this chat room.
Permission to access Bluetooth is only required for the “Pebble Watch“.
Calculations are done in imperial and metric system.
The results that this calculator formulates are theoretical in nature and intended solely as an aid. The user agrees to accept full responsibility to verify that the calculated results meet their requirements before using them. WORKINGBYTES4U assumes no responsibility.
All Application Badges
Paid
app
app
Android
2.3+
2.3+
Bug
buster
buster
Android app
App History & Updates
What's Changed
Bug Fixes
Bug Fixes
Price update Price changed from $9.99 to $16.99.
Version update Machinist Helper Full was updated to version 4.3.1
Version update Machinist Helper Full was updated to version 4.3
Price update Price changed from $9.90 to $12.66.
What are users saying about Machinist Helper Full
O
by O####:
by O####:
I use this app all the time. I liked it enough to purchase it.
B
by B####:
by B####:
Great for checking surface finish outcome
L
by L####:
by L####:
Has everything you will need in one package
Y
by Y####:
by Y####:
So far all I've really needed this for was some trig, which was good but slightly disappointing- the value labels on the diagram disappear after you input the first value, forcing you to remember what you'll need ahead if time. No other complaints from what ice played with so far, I'll update as I use it more but looks good for the other stuff
F
by F####:
by F####:
I use it In the shop and out. The unit conversion is very nice. Trig functions outstanding.
U
by U####:
by U####:
Constantly updating and adding features. Well worth the money for the full addition
Y
by Y####:
by Y####:
Most info of all the apps out there.
J
by J####:
by J####:
Has everything you will need in one package
Y
by Y####:
by Y####:
You don't have a built-in recommendation for chip load and that makes us have to go to tool supplier websites and download charts. Why can't you take those charts and put that information into the app?
Y
by Y####:
by Y####:
Worth it!
E
by E####:
by E####:
Some screens are hard to get buttons and/or entry text boxes visible on my small phone screen. Otherwise no complaints.
A
by A####:
by A####:
For machinist and Students, this is far above the best App.
Y
by Y####:
by Y####:
Little finicky, but does the job well.
Y
by Y####:
by Y####:
Great app! Constantly updated with more content! Definitely worth the money! A machinist must have!
D
by D####:
by D####:
Exactly the calculator this machinist has been looking for. Excellent.
Y
by Y####:
by Y####:
Fast and simple!
X
by X####:
by X####:
So far all I've really needed this for was some trig, which was good but slightly disappointing- the value labels on the diagram disappear after you input the first value, forcing you to remember what you'll need ahead if time. No other complaints from what ice played with so far, I'll update as I use it more but looks good for the other stuff
G
by G####:
by G####:
I use it In the shop and out. The unit conversion is very nice. Trig functions outstanding.
N
by N####:
by N####:
Constantly updating and adding features. Well worth the money for the full addition
X
by X####:
by X####:
Most info of all the apps out there.
B
by B####:
by B####:
Has everything you will need in one package
X
by X####:
by X####:
You don't have a built-in recommendation for chip load and that makes us have to go to tool supplier websites and download charts. Why can't you take those charts and put that information into the app?
Q
by Q####:
by Q####:
Worth it!
L
by L####:
by L####:
Some screens are hard to get buttons and/or entry text boxes visible on my small phone screen. Otherwise no complaints.
P
by P####:
by P####:
For machinist and Students, this is far above the best App.
X
by X####:
by X####:
Little finicky, but does the job well.
X
by X####:
by X####:
Great app! Constantly updated with more content! Definitely worth the money! A machinist must have!
K
by K####:
by K####:
Exactly the calculator this machinist has been looking for. Excellent.
X
by X####:
by X####:
Fast and simple!
O
by O####:
by O####:
Excellent App For machinist and Students, this is far above the best App.
Z
by Z####:
by Z####:
Great app Little finicky, but does the job well.
P
by P####:
by P####:
Absolutely awesome Exactly the calculator this machinist has been looking for. Excellent.
L
by L####:
by L####:
5 Star App! Great app! Constantly updated with more content! Definitely worth the money! A machinist must have!
by M####:
For machinist and Students, this is far above the best App.