AVR Flasher over FTDI Android

Willkommen beim "ANDROID AVR Flasher over FTDI" !

Mit dieser App könnt ihr eure Atmel (AVR) Chips mittels ISP programmieren. Dazu notwendig ist euer Android Smartphone / Tablet und ein FTDI Chip mit MPSSE Unterstützung (getestet mit einem FT2232).

Der Flasher basiert auf der j2xx von FTDI, sodass KEINE ROOT Rechte notwendig sind.

Der Flasher wurde mit einem Iconia A210 Android Tablet (4.1.1. sowie 4.3.1) verifiziert.

Folgende AVRs werden derzeit unterstützt:
- AtMega48 (Signature = 001E9205)
- AtMega48A (Signature = 001E9205)
- AtMega48PA (Signature = 001E920A)
- AtMega88 (Signature = 001E930A)
- AtMega88A (Signature = 001E930A)
- AtMega88PA (Signature = 001E930F)
- AtMega168 (Signature = 001E9406)
- AtMega168A (Signature = 001E9406)
- AtMega168PA (Signature = 001E940B)
- AtMega328 (Signature = 001E9514)
- AtMega328P (Signature = 001E950F)
- AtMega164 (Signature = 001E940A)
- AtMega164A (Signature = 001E940F)
- AtMega164PA (Signature = 001E940A)
- AtMega324 (Signature = 001E9508)
- AtMega324A (Signature = 001E9515)
- AtMega324PA (Signature = 001E9511)
- AtMega644 (Signature = 001E9609)
- AtMega644A (Signature = 001E9609)
- AtMega644PA (Signature = 001E960A)
- AtMega644P (Signature = 001E960A)
- AtMega1284 (Signature = 001E9706)
- AtMega1284P (Signature = 001E9705)
- AtMega169 (Signature = 001E9405)
- AtMega169A (Signature = 001E9411)
- AtMega169PA (Signature = 001E9405)
- AtMega329A (Signature = 001E9503)
- AtMega329PA (Signature = 001E950B)
- AtMega3290A (Signature = 001E9504)
- AtMega3290A (Signature = 001E950C)
- AtMega649A (Signature = 001E9603)
- AtMega649P (Signature = 001E960B)
- AtMega6490A (Signature = 001E9604)
- AtMega6490P (Signature = 001E960C)
- AtTiny261 (Signature = 001E910C)
- AtTiny861 (Signature = 001E930D)
- AT90USB64 (Signature = 001E9682)
- AT90USB646 (Signature = 001E9682)
- AT90USB647 (Signature = 001E9682)
- AT90USB128 (Signature = 001E9782)
- AT90USB1286 (Signature = 001E9782)
- AT90USB1287 (Signature = 001E9782)
- AtMega8 (Signature = 001E9307)
- AtMega8A (Signature = 001E9307)
- AtMega16 (Signature = 001E9403)
- AtMega16A (Signature = 001E9403)
- AtMega32 (Signature = 001E9502)
- AtMega32A (Signature = 001E9502)
- AtMega64 (Signature = 001E9602)
- AtMega64L (Signature = 001E9602)
- AtMega64A (Signature = 001E9602)
- AtMega128 (Signature = 001E9702)
- AtMega128A (Signature = 001E9702)
- AtMega8535 (Signature = 001E9308)
- AtMega640 (Signature = 001E9608)
- AtTiny25 (Signature = 001E9108)

-> Fehlt ein gewünschter Controller? Kontaktieren Sie mich, damit ich den fehlenden Typ in die Datenbank aufnehme.

Seit der Version 1.1 können angepasste VID/PIDs verwendet werden. Welcome to the "ANDROID AVR flasher over FTDI"!

With this app you can program your Atmel chip via ISP (AVR). Also necessary is your Android smartphone / tablet and a FTDI chip with MPSSE support (tested with a FT2232).

The Flasher is based on the j2xx FTDI, so NO ROOT privileges are required.

The flasher was verified with a Iconia A210 Android Tablet (4.1.1., And 4.3.1).

The following AVRs are currently supported:
 - ATmega48 (Signature = 001E9205)
 - AtMega48A (Signature = 001E9205)
 - AtMega48PA (Signature = 001E920A)
 - ATmega88 (Signature = 001E930A)
 - AtMega88A (Signature = 001E930A)
 - ATMEGA88PA (Signature = 001E930F)
 - ATmega168 (Signature = 001E9406)
 - AtMega168A (Signature = 001E9406)
 - AtMega168PA (Signature = 001E940B)
 - ATmega328 (Signature = 001E9514)
 - ATMEGA328P (Signature = 001E950F)
 - AtMega164 (Signature = 001E940A)
 - AtMega164A (Signature = 001E940F)
 - AtMega164PA (Signature = 001E940A)
 - AtMega324 (Signature = 001E9508)
 - AtMega324A (Signature = 001E9515)
 - AtMega324PA (Signature = 001E9511)
 - ATmega644 (Signature = 001E9609)
 - AtMega644A (Signature = 001E9609)
 - AtMega644PA (Signature = 001E960A)
 - ATMEGA644P (Signature = 001E960A)
 - AtMega1284 (Signature = 001E9706)
 - ATMEGA1284P (Signature = 001E9705)
 - ATmega169 (Signature = 001E9405)
 - AtMega169A (Signature = 001E9411)
 - AtMega169PA (Signature = 001E9405)
 - AtMega329A (Signature = 001E9503)
 - AtMega329PA (Signature = 001E950B)
 - AtMega3290A (Signature = 001E9504)
 - AtMega3290A (Signature = 001E950C)
 - AtMega649A (Signature = 001E9603)
 - AtMega649P (Signature = 001E960B)
 - AtMega6490A (Signature = 001E9604)
 - AtMega6490P (Signature = 001E960C)
 - AtTiny261 (Signature = 001E910C)
 - AtTiny861 (Signature = 001E930D)
 - AT90USB64 (Signature = 001E9682)
 - AT90USB646 (Signature = 001E9682)
 - AT90USB647 (Signature = 001E9682)
 - AT90USB128 (Signature = 001E9782)
 - AT90USB1286 (Signature = 001E9782)
 - AT90USB1287 (Signature = 001E9782)
 - ATmega8 (Signature = 001E9307)
 - ATmega8A (Signature = 001E9307)
 - ATmega16 (Signature = 001E9403)
 - ATMEGA16A (Signature = 001E9403)
 - ATmega32 (Signature = 001E9502)
 - AtMega32A (Signature = 001E9502)
 - ATmega64 (Signature = 001E9602)
 - AtMega64L (Signature = 001E9602)
 - AtMega64A (Signature = 001E9602)
 - ATmega128 (Signature = 001E9702)
 - ATMEGA128A (Signature = 001E9702)
 - ATmega8535 (Signature = 001E9308)
 - AtMega640 (Signature = 001E9608)
 - ATtiny25 (Signature = 001E9108)

-> If there is no desired controller? Contact me, so I record the missing type in the database.

Since version 1.1 custom VID / PID can be used.