RayRemote
Free App
Advertisements
About RayRemote
About RayRemote
RayRemote transforms your phone into a virtual remote keypad for Raymarine multifunction displays.
Android/Kindle Fire = Best performance achieved with 1GHz processor or better and running Android 2.2.2 or later.
Multi-Functional Display software requirement – v 3.15 or later.
Compatible displays (MFDs) – all third generation c-Series, e-Series, g-S and Wi-Fi enabled a-Series models, plus all the Axiom range
RayRemote emulates the keypad of Raymarine displays, giving you control of all the MFD functions with large full screen keypad.
The virtual uni-controller lets you rotate through menus and make menu adjustments effortlessly. The app also provides a viewing mode, which mirrors the MFD’s display. To use this app please upgrade your Raymarine WiFi enabled Multi-Functional Display to software version 3.15 or later. Software upgrades are available for free at www.raymarine.com/support.
Note - RayRemote will also run on tablet devices, though it is primarily intended for smart phones.
Getting Started
Download the RayRemote app, and install it on your device. You should ensure your device has access to the internet when initially installing to enable verification of the app. Next, connect to your Multifunction Display via Wi-Fi (see MFD operators manual for Wi-Fi setup details). When the Wi-Fi connection is established, launch the app. You should now see the same image on your mobile device as you do on your MFD. Simply touch the screen and a button will appear to switch to remote control mode.
Note - autopilot activation/deactivation is not possible via a mobile device.
RayRemote transforms your phone into a virtual remote keypad for Raymarine multifunction displays.
Android/Kindle Fire = Best performance achieved with 1GHz processor or better and running Android 2.2.2 or later.
Multi-Functional Display software requirement – v 3.15 or later.
Compatible displays (MFDs) – all third generation c-Series, e-Series, g-S and Wi-Fi enabled a-Series models, plus all the Axiom range
RayRemote emulates the keypad of Raymarine displays, giving you control of all the MFD functions with large full screen keypad.
The virtual uni-controller lets you rotate through menus and make menu adjustments effortlessly. The app also provides a viewing mode, which mirrors the MFD’s display. To use this app please upgrade your Raymarine WiFi enabled Multi-Functional Display to software version 3.15 or later. Software upgrades are available for free at www.raymarine.com/support.
Note - RayRemote will also run on tablet devices, though it is primarily intended for smart phones.
Getting Started
Download the RayRemote app, and install it on your device. You should ensure your device has access to the internet when initially installing to enable verification of the app. Next, connect to your Multifunction Display via Wi-Fi (see MFD operators manual for Wi-Fi setup details). When the Wi-Fi connection is established, launch the app. You should now see the same image on your mobile device as you do on your MFD. Simply touch the screen and a button will appear to switch to remote control mode.
Note - autopilot activation/deactivation is not possible via a mobile device.
All Application Badges
Free
downl.
downl.
Android
2.2+
2.2+
Android app
App History & Updates
What's Changed
Updates for Latest Android and Raymarine Axiom releases
Updates for Latest Android and Raymarine Axiom releases
Version update RayRemote was updated to version 0108
Version update RayRemote was updated to version 107
More downloads RayRemote reached 10 000 - 50 000 downloads
More downloads RayRemote reached 5 000 - 10 000 downloads
What are users saying about RayRemote
Z
by Z####:
by Z####:
Works great with the latest software upgrade connected axiom and hybrid touch screen and latest m200 camera all works well raymarine thankyou
D
by D####:
by D####:
It used to work but not anymore. Nothing has changed except the app just keeps saying no internet available and shuts down!
Z
by Z####:
by Z####:
Crashes on Samsung S7. No support for phones after 2013. I don't think it is good enough to advertise an "android app" when said app doesn't work with recently released devices.
Z
by Z####:
by Z####:
It says it's connected and then just shows me a black screen? Nexus 6P
Y
by Y####:
by Y####:
Doesn't connect but works fine from a tablet, please fix it.
Z
by Z####:
by Z####:
Doesn't work with Android 7.0 screen is just black.
Z
by Z####:
by Z####:
Doesn't work on Samsung S 7 please keep up with the times.
V
by V####:
by V####:
Doesn't work with any of my android platforms - poor update speed leaving me with a new device that is no longer as advertised
Z
by Z####:
by Z####:
Exllentt app for all ray marine navigators..
Z
by Z####:
by Z####:
Crashes on startup.
G
by G####:
by G####:
Great. Second screen and remote control
E
by E####:
by E####:
Brilliant as a repeater down below. Love it.
Z
by Z####:
by Z####:
The app does not work at all remove this stupid app out of the freaking play store
B
by B####:
by B####:
Doesn't work, crashes on startup
V
by V####:
by V####:
Just keeps looking for unit but never finds it. Viewer app works though. Would be nice if this one worked.
D
by D####:
by D####:
The app does not work at all remove this stupid app out of the freaking play store
D
by D####:
by D####:
Not sure the point of this app. Why waste phone life on a odd interface when you can just touch the screen right in front of you. Seems like an app for the sake of having an app.
D
by D####:
by D####:
We bought the raymarine a98 because which sold it to us was able to have a wireless secondary screen whilst fishing on wrecks but 1 massive floor we get no internet 25 miles from land so there is no use for it ????
G
by G####:
by G####:
I can view it but it wont let me control anything.
A
by A####:
by A####:
Ain't working do sent even let me in
L
by L####:
by L####:
Doesn't work
L
by L####:
by L####:
Doesn't work
D
by D####:
by D####:
At sea
D
by D####:
by D####:
Omega
D
by D####:
by D####:
Works perfect on sony xperia and samsung tab!!
K
by K####:
by K####:
Now after the update this app doesn't work, but the viewer it does.
K
by K####:
by K####:
Works perfect on sony xperia and samsung tab!!
X
by X####:
by X####:
The app will not open. Useless!
L
by L####:
by L####:
Connects and shows me my screen, but then crashes.
D
by D####:
by D####:
Works great.
K
by K####:
by K####:
The app does not work at all remove this stupid app out of the freaking play store
U
by U####:
by U####:
Doesn't work with Sony xperia z3 can see screen but pressing buttons does nothing.
U
by U####:
by U####:
We have a boat with 2 helms. This is great for leaving the main unit at one helm and controlling it from the other. Unfortunately, I have to use phone and tablet in tandem because this app is controlled through a full screen remote instead of replicating the main unit touch controls. The wifi delay makes controlling the unit very clumsy for this. Also, adding an option for doing a screen timeout in viewing mode would go a long way towards saving battery
U
by U####:
by U####:
Can view what's on the MFD but doesn't not control it from a Samsung Galaxy Note II. Even when the settings in Lighthouse II are set to control. Please fix this app with an update.
I
by I####:
by I####:
Great app
N
by N####:
by N####:
Please fix this. I can view the screen, but can't control it. It worked before I upgraded to 4.4.
Z
by Z####:
by Z####:
Works great on my sony
D
by D####:
by D####:
RayMarine REMOTE will connect to my MFD, I can view the screen but the touch screen functions zoom and pan do not work
D
by D####:
by D####:
Very precise and convenient.
by Z####:
Have samsung s6 galaxy. Have brand new Axiom. Had to load update software to Axiom first by hot spot on phone....figured it out myself...raymarine has no instruction for this. Then downloaded this app. Axiom screen shows upon phone...but will not minpulate from phone. Worthless at this time. Buy a Garmin!