Outdoor Ceiling Fan Ideas

This type of outdoor ceiling fan is conductive to areas with high humidity or condensation and cannot withstand direct water contact. small ceiling fans are not designed for direct contact with water. A modern ceiling fan is perfect for a covered porch, where the fan will be out of direct contact from water.

Once you've picked out your rustic ceiling fan, and you already have a light fixture in the ceiling. You can follow the basic instructions that are below if you already have a light fixture in the ceiling. Just remember to start by turning off the light from the wall switch and removing the current light fixture, leaving the outlet box in the ceiling with 3 wires- black, white, ground (green), and sometimes blue. Open the fan box, and basically go through the instructions.

outdoor Ceiling fans are equally efficient to run during the winter months. Flip the switch to the clockwise setting, and your ceiling fan with light will create an updraft, sending warmer air along the ceiling and back down into the room. This simple change can cut your heating bill by 10 to 14 percent, by allowing you keep your thermostat on a lower setting.

Selecting the proper size for outdoor ceiling fan will not only maximize its operating potential, it also impacts how it will look in a given space. Let’s say you have a large family room with cathedral ceilings. However, you prefer the unobtrusive profile of flush mount of hunter ceiling fans. Not only will this design look out of place in an expansive room with high ceilings, it won't have the appropriate “drop” and blade span to adequately cool the space.

Do you want to control the fan from a wall switch, a remote, or a good old-fashioned pull chain? You may not have a choice. Mode of operation depends on the fan that you choose. Tastes vary, but there is certainly something to be said for the convenience of a remote that enables you to change fan speed (or ceiling fan light fixture settings) effortlessly.

If the fan includes a light fixture, ensure that the circuit is able to handle both the fan and light. If your circuit will not hold this capacity then a new circuit must be run from the home’s main panel to the fan.