Easy DIY Colorful Birdbath

Even when the birds aren't dipping, sipping and sunning, this easy-to-make, easy-to-clean birdbath is plenty festive in the garden. With this easy DIY project, you'll be creating a beautiful birdbath in an afternoon.

Materials Needed:

   plate, platter or shallow bowl
   1/2" PVC pipe bushing
   3-foot length of 1/2" steel stake or PVC pipe
   exterior spray paint (your choice of color)
   sandpaper or sanding block

   silicon sealant or epoxy adhesive
   craft paper
   chalk
   permanent marker
   scissors

Prepare surfaces.

1. Turn the plate upside down and apply chalk to bottom edge.

2. Turn the plate right side up and firmly press onto craft paper, creating an imprint for your template.

3. Carefully cut out the template. Repeat steps 1-3 for the PVC bushing.

4. Fold the craft paper templates into quarters. Cut off the tip at the narrow end of the folded templates, creating a small hole in the center .

5. Place the large template on the bottom of the plate . Mark the center of the plate using a permanent marker.

6. Align the center of the PVC pipe bushing template with the center point of the plate. Mark the outside edge of the PVC template .

Attach the bushing.

1. Following manufacturer's instructions, apply a generous amount of adhesive along the PVC bushing template line on the plate and the flat edge of bushing. Press bushing into the adhesive.

2. Allow adhesive to cure .

3. Pound stake into ground and place birdbath on stake. Fill with water. Enjoy!

Note: This birdbath is easy to clean. Just remove it from the stake and rinse as needed.
Copper Birdbath Faucet


So simple right ? we share this tutorials to make your garden, unique,cheerful, elegant and make garden  more beautiful .

Want to know more ? want to try make it ?

Download this application now and get what you want here. worth to try and you will like it.
simply share through any social media platforms. thank you for downloading. please enjoy and give us any feedback.