Knock Detector for Torque Pro for Android
In order to work on all car models Knock Detector uses heuristic algorithm to find detonations. It is based on analysis of timing advance, throttle, revs and speed. On some ECUs it may report knocks but the reason could be timing retard because of specific factory tune.
Knock Detector will not report minor car specific knock events so it can also miss some detonations. However it will report ECU learned detonations. Such knock events will likely disappear at some moment. Detonations can be real or fake, they can appear and disappear, so there is no reason to worry if such are reported. Detonation may be caused just by depressing the throttle at high revs. Some stock ECUs pull timing 0.5 - 1.00 even on WOT so fake knock will be detected.
Engine coolant and intake air temperaturesare also monitored as major knock factors. Avoid spirited driving or testing when both values are not green - too cold or too hot temperatures can cause detonations.
Please install, ejnoy and share BigDinch - the real life smartphone top chart - https://play.google.com/store/apps/details?id=com.bigdinch.mobile
P.S.
Русские друзья, вы должны установить Torque Pro с OBD2(ELM327) устройство. Спасибо !
Amis français, vous devez installer Torque Pro avec OBD2(ELM327) engin aussi.
This crashes every time I try to open it. I have uninstalled and reinstalled it several times.
I downloaded this app and used it with torque pro on my 2005 Mercedes-Benz C230 Kompressor and tested it twice. Both times the app stated no detonations
Don't trust it one bit for real tuning data
It works, just read the instructions.
Will this work on a 2001 dodge Dakota slt ?
Electronic Testing
Works perfectly.
Assuming it's hooked up/in correctly, it doesn't seem to do anything. The air temp always reads 32®, no matter the outside temp. The little bar moves, but never enuff to give a reading. I can only hold the pedal floored for so long. I"ll keep trying.
I have a 2000 Subaru forester with a backwards frankenmotor. Ej22 block and ej25 heads currently running a td04 and front mount on 13psi so my motor is not common by any means which makes it one hell of a task for my ecu to learn the curve though she is still purring. This app actually helped me discover a loose plug in cylinder 4 that ended up fouling out causing smoke. Hats off to you sir.
First off... Instructions on how to use it would be nice. I believe you are to floor it in 3rd gear. Is that supposed to be from a stop... Don't know. I see the throttle indicator move, and temps move around, but I keep having to back off because of speed and engine rpm. Don't think it is necessary to go 100mph in third to test it. Am I not doing something right? Or does it do nothing if there is no knock? Using it on a 2013 f150 ecoboost.
On my X's ara Picasso I have it in 3rd gear then when I put my foot down revs go all the way up but the test don't start .also full throttle is only 65%
Seems to work well. Just start the app, open the throttle fully (press the gas pedal all the way down) and wait a few seconds until it says it is done.
Hooked it up, got on the interstate with it, test never ended. The status bar fluctuated and got as high as your screen shot for the app preview (63%)and thats it. I got the prius to 101mph and this thing never completed its task.
Great app!! Does it take knock learn factor into consideration? If so, if there's no detonation in the test, the knock learn factor should be at 0?
If I have possible denotations, what should I do? What does that mean?
Thanks! Great does just what it says!
Will this work on a 2001 dodge Dakota slt ?
Assuming it's hooked up/in correctly, it doesn't seem to do anything. The air temp always reads 32®, no matter the outside temp. The little bar moves, but never enuff to give a reading. I can only hold the pedal floored for so long. I"ll keep trying.
i bought the $5 torque pro app on my blackberry. i ordered the plax kiwi2 waiting for it in mail. than noticed their was a knock detector plug in which i cannot get for the blackberry so the $5 app and $80 wifi obd2 seems like a waste all i wanted to do was monitor KR in my boosted GTP without having to buy the aeroforce $250 gauge but i was foolish to think this lil apps can even compare to real tools for the job. so do i just find a android tablet and pay $5 again on that and than download this plug in free? or do you have blackberry version? sideloading snap store didn't work but almost. and will you ever bring out advanced EX for pontiac? i mean you have hyundai and kia over pontiac? lol thats cray cray. specially kia. main mission is to monitor KR knock retard. help me out jbox
Its OK but behaving trouble with Afr not working which is one of the reasons I bought this setup
Sim yako iangalie
Use all the time works great moto Xoom.
My phone's stuck on a scooter.
Nice!!
Awesome
Lekker
An useful and innovative application!
No working. Uninstall
Have yall heard about The fart button app
It is so useful
Great app works everytime!
Great plugin
Very good
Reports false detonations constantly!
The app confirmed some of my suspicions about my engine. :-(
Very cool
I rev to redline but it only puts me at 55%. I will try again tomorrow
Does it work on 2011 Camaro SS and 2014 Corvette Stingray Z51?
I can't get this to work with a 2003 v6 Saturn vue. Shows throttle is not at 100% when it is to the floor.
by U####:
I have not yet tryout the app but soon i do let you know.