NDSII Lite

Awesome! My 2005 pathfinder had the idle issue after cleaning the throttle body and doing the manual pedal depress and on/off ignition method did not work. I was about to take to the dealer so they can do it for me at a price between $130 to $200. t had a bluetooth OBO adpator around and gave this app a try. It connected right up went to the idle clear and idle relearn section and tap tap tap. Car is idling at 650 rpm from the 1200 rpm originally. Thank you buddy.

I was able to connect NDSII Lite with my adapter. I purchased NDSII and couldn't connect to my adapter. I am getting error "Unable to connect"

Can not connect. Ini failed. Using elm 327 v1.5. Viecar obdII. Will try another adapter. Shame. PC version really good.

CANT CONNECT TO MY NISSAN CUBE imported from japan! using elm327 version 2.1 bluetooth adapter. it connects the disconnects right away...

I was getting the infamous P0507 (high idle) error on my 350z after installing a Kinetix V+ plenum and cleaning the throttle body while I was at it. I had done the pedal dance several times and had success but it wasn't sticking after a restart. I eventually stumbled across this app after a few hours of Googling the issue and seeing people mentioning NDS2. I plugged in my cheap bluetooth OBD2 adapter (shows as CHX when pairing) and had no problems connecting to my adapter. I let my car idle until the temp gauge looked to be at operating temp, cleared self learn to be safe, then hit 'idle air volume learn' and it immediately dropped my RPMs. So much so I thought it was going to stall but I gave it a minute to sort itself and everything was fixed and I cleared the error code! My Z runs great again and after a half dozen restarts I haven't seen the error again!!!

Worked perfectly on 2001 Nissan Primera using a cheap Bluetooth OBD2 reader from Amazon

T31 mr20d connects to elm327 Bluetooth connector but no data display Fails to read

Great product

I'll give it a 5star if it can already read the ecu of QR20 ???? EDIT: should I get a v1.5 elm 327? I currently have a v2.1. Hoping for your response. Thanks!

This is the only app that was able to read my 2007 Xtrail t30 not even torque could do it my only complaint is that the dash user interface does not seem customizable and I am unable to resize or drag and drop dash parameters

I keep getting an 'ini failed' so I can't connect. Z32

Ini failed 2007 nissan versa

Lite version works then $9 version wont

Worked on my mr18 engine cleared my fault code but couldnt do the idle air volume learn feature.

I thought maybe my data link connector was broken before this app.now I get fault codes

Works perfectly with Nissan Pathfinder 2003 thanks

Kept dropping connection to ELM adapter.

this is a load of crap that does not work.

Must have for any nissan owner with elm chip

Cleaned the throttle body on my 2005 Nissan Xterra and the idle went way up and threw a check engine light for fast idle (around 1500 rpm) dealer wanted $80 to reset this! A little quirky, and took about three tries to connect, but idle instantly dropped to around 600-630rpm (where it should be) after doing the idle learn. Great tool! Thanks!

Id issue. Micra k12 did not connect

Kept dropping connection to ELM adapter.

Good app

After multiple attempts with 2 different obd2 scanners I was able to get this to work on my 2007 Nissan Murano. Both scanners worked with torque but I could only get 1 of them to work with this software. I initially tried ndsIII because I have a 07 but it didnt work. It took a few back to back tries at connecting but I finally it to connect with Foseal Car OBD2 OBD 2 OBDII Bluetooth Diagnostic Scan Tool Check Engine Light for Android & Windows System Torque Pro which I purchased off amazon. Cleared the self learn and was able to perform the idle relearn successfully. Thanks!

Couldn't find the error on airbag on my 2002 primera p12 using elm327 v1.5.. any help??

I have Bluetooth OBD2 blue color ELM327. This app is not read nissan Livina ECU

Must have for any nissan owner with elm chip

I purchased nds111 and it wouldnt connect to my ecu(y11 nissan wingroad) however i got the free version nsd11 and it worked perfectly found faults and cleared them fine

Connected flawlessly to my '05 Altima and could read all the data. OBDDoctor and Torque have been disappointing in the past since they couldn't read the sensors completely. But this app can do far more than those. Lite version keeps demanding an active internet connection to load all the ads and stuff. Getting the full version now. This app is definitely a keeper!

I use NDS 1 + 2 for pc, but Android App doesn't connect. Keep gettin "set header failed". It occasionally connects but then fails. Adapter works with other apps. I will buy full version if issues are resolved.

Didint work with my current ELM327 1.5 adaptor that does work with Car Gauge pro but have another adaptor comming in the post will try again and proably buy full version if it does work. 2003 4.8 GU Patrol Auto

this is a load of crap that does not work.

Great app, are there any additional features on the purchase version besides the advertisement removal?

Bought the full android version as thought it would provide more details for my Nissan Primera 2.2dci 2002. Unfortunately it only showed the NATS faults which it also would not clear, a bad investment from my point of view. It clearly states that it would work on this vehicle but ECM connection fails

Connects to blue tooth half the time and looses it. Tried to scan. No data. I dont wanna try my luck with the one you have to pay for.

Does not work on 2007 Nissan Patrol (IV) Y61 with ZD30 diesel engine This car has a OBDII 16 connector but uses ConsultII protocol Error message "ini failed" Used ELM327 chip v1.5

Works pretty well on my V41 Quest paired with a OBDLink MX. It does like to crash from time to time, and I know the Dev needs $$, but the advertising is way too intrusive. Could be faster, could be more reliable, but for the price, it'll get you farther then Torque Pro will get you on a Consult I/II hybrid era Nissan product.

Install torque, this app dont work with t30.

Used it with a fairly priced ELM327 Adapter from ebay on my Nissan Ad van 2007 model,connected all parameters showing ok but keeps disconnecting. I had tried torque which never connected with the ecm, please correct this fault then i will give it a 5!

It comunicate with my Nissan Almera ECU (something most apps don't do), but it crashes as soon as it does.