NDSIII Lite

NDSIII Lite Free App

Rated 2.53/5 (30) —  Free Android application by Nissan Data Scan

Advertisements

About NDSIII Lite

The NDSIII Lite provides basic diagnostics for N i s s a n and I n f i n i t i cars. It is intended for newer cars that have a 16-pin OBDII connecter and use Consult III protocol over CAN. Those are usually cars build between years 2007 and now. The connector is typically located near the fuse box.

This application supports both, petrol and diesel cars. It communicates with the engine ECU using Consult III protocol. It uses the same communication protocol as the dealer diagnostic tool. This protocol is far more comprehensive than the generic ISO15765 protocol.

The current version of the app has following functions:
• Data Display with data logging
• Self Diagnostics
• Work Support with Clear Self Learn, Idle Air Volume Learn, Exhaust Valve T/C Learn and M/T Neutral Position Learn functions
• Dash Display with customisable gauges
• Video Recorder – disabled in Lite version

A Bluetooth diagnostic adapter is required to connect to the car. This app is design to work with adapters build on the popular ELM327 chip. They are very well priced and available from many Internet suppliers or eBay. For a list of tested adapters please visit our website.

NOTE: There are a number of adaptors from China with fake ELM327 v2.1 chip. Those adaptors do not have all required commands and are not supported. Look for adaptors with v1.5 or v1.4 chip.

If you would like an application without advertising purchase the full version also available from Google Play store.

How to Download / Install

Download and install NDSIII Lite version 1.31 on your Android device!
Downloaded 5,000+ times, content rating: Everyone
Android package: com.nissandatascan.ndatascaniiilite, download NDSIII Lite.apk

All Application Badges

Free
downl.
Android
3.0+
Bug
buster
For everyone
Android app

App History & Updates

What's Changed
Changes in this version:
• Updated communication protocol for compatibility with new adapters
• User permission updates
• Customisable gauge colours – disabled in Lite version
• Small bug fixes
We are continuously working on improving our apps so send us your issues and suggestions.
Version update NDSIII Lite was updated to version 1.31
Version update NDSIII Lite was updated to version 1.11
More downloads  NDSIII Lite reached 5 000 - 10 000 downloads
More downloads  NDSIII Lite reached 1 000 - 5 000 downloads

What are users saying about NDSIII Lite

T70%
by T####:

Life saver!!! Needed idle relearn for 2007 Altima after throttle body cleaning. Tried the relearn steps over 20 times, didn't work. Found this app, tried with a cheap elm327 2.1 OBD adaptor, didn't work. Bought a "veepeak" Bluetooth adaptor (Canada), worked like a charm. Just plugged it in after driving from work, connected it, idle relearn button and happily ever after. :) Will definitely buy the full version

T70%
by T####:

For Lite version , There is a water temp on DATA DISPLAY tap but not on "DASH" tap (temp is n/a) . I have no idea why and do not know if buying full version will fix it or not. **I connect it with v1.5 scaner to my 2009 nissan teana (altima) j32. My device is LG G2** Please answer. Thank you

H70%
by H####:

Connects to the adaptor, but doesn't display any data. Status says "set diag session failed". Unusable. (the adaptor works fine with torque).

U70%
by U####:

Used with BAFX Products 34t5 (bought from Amazon). Had to perform an Idle Relearn after cleaning out the Throttle Body. Got NDS3 lite, and couldn't get the idle relearn to perform on an 07 Infiniti G35 Sport at first. Turn the vehicle off, performed the Accelerator relearn, then the Throttle Body check. Then cleared the Self Relearn before driving, drove the vehicle for 15mins. Got the vehicle within recommended parameters, performed the Idle Relearn, and it finally worked!!! Saved a trip to the dealer!!!

E70%
by E####:

Bought the OBD adapter recommended by NDS. Connects but "Get Params failed" error . Adapter works fine in Torque.

Y70%
by Y####:

App crashes on startup

T70%
by T####:

Adapter had to be reset each time. Works fine with torque.

Y70%
by Y####:

I have a elm327 but I didn't connect with nissan car. Can you tell me how I connect with nissan car.

Y70%
by Y####:

Adapter had to be reset each time. Works fine with torque.

J70%
by J####:

was hopefull about this app tried 2 devices 2 adaptors with same result, RPM at idle reads 95460


Share The Word!


Rating Distribution

RATING
2.55
30 users

5

4

3

2

1