Oscilloscope Pro

Oscilloscope Pro$5.99

Rated 4.17/5 (81) —  Free Android application by NFX Development

Advertisements

About Oscilloscope Pro

NFX Oscilloscope is a simple signal vs. amplitude analyser.

Currently there are two input options for the application.

**** PLEASE ENSURE THE GABOTRONICS DEVICE IS UP TO DATE!!
***** USB SUPPORT ****** (only for android 3.1 and greater)
The newest and best input option is a USB hardware device provided by Gabotronics. USB host mode has now been compatible since android 3.1, therefore most new phones and tablets will support USB host mode (Please check device). NFX Oscilloscope supports the Gabotronics Xprotolab/Xminilab, this has 2 analogue input channels and 8 digital channels and measures a tiny 2.5 x 4 cm!! The device it's self is a cheap portable alternative to most mainstream oscilloscopes, and has many different features. Connecting the Xprotolab to the NFX Oscilloscope provides a powerful and cheap oscilloscope platform for your portable needs. For more information on the Xprotolab or Xminilab click the following links.
http://www.gabotronics.com/development-boards/xmega-xprotolab.htm
http://www.gabotronics.com/development-boards/xmega-xminilab.htm

So match this application with the cheap device from gabotronics and you will get a great portable oscilloscope!
Note: Only the analogue channels, logic Channels and tone generator is supported on the xprotolab/xminilab/xprotolab plain

Spec list for xprotolab:
2 Analog Inputs
Maximum Sampling rate: 2MSPS
Analog Bandwidth: 200kHz
Resolution: 8bits
Input Impedance: 1MΩ
Buffer size per channel: 256
Input Voltage Range: -14V to +20V

Currently the USB mode has been tested on Samsung Galaxy Nexus , Asus Transformer , Asus Nexus 7 , Samsung Galaxy S3
There has been problems reported with android version 4.3 and USB host, there is a major bug in the release, which is set to be updated at some point in the future.

Please note : Most devices will need a OTG cable to enable usb host mode. See phone specific instructions for more information.

***** Microphone SUPPORT ******
The second option is the microphone input to the android device. This can be used to attach a scope lead to the jack socket. More information can be found at the following website.
http://www.instructables.com/id/A-Preamplifier-for-Smartphone-Oscilloscopes/
Features include, triggering for different impulse and continuous signals. In addition to this there is level measurement and fundamental frequency readings

It is possible to control the amplitude, time/div and trigger level whilst monitoring. Settings included trigger directions, sample rates and voltage span calibration.

Have a look at this blog for more scope cable information from a fellow user of Nfx oscilloscope.
http://www.instructables.com/id/A-Preamplifier-for-Smartphone-Oscilloscopes/

Head to my blog for more information on the NFX Oscilloscope.
http://nfxdevelopment.wordpress.com/

If you are unhappy in anyway with this product, feel free to contact me and I will help all I can, if I cannot help I will offer a refund at any time (even past the 15 minute google refund mark)

Email : nfxdevelopment@gmail.com

Thank you for purchasing, I hope you enjoy! If you have enjoyed this app leave a quick rating and comment. Thanks!!

How to Download / Install

Download and install Oscilloscope Pro version Varies with device on your Android device!
Downloaded 1,000+ times, content rating: Everyone
Android package: com.nfx.noscpro, download Oscilloscope Pro.apk

All Application Badges

Paid
app
Bug
buster
For everyone
Android app

App History & Updates

What's Changed
** V6.1.24 Fix Xproto tim/div misrepresentation
** V6.1.23 Fix Xproto tim/div misrepresentation
** V6.1.22 Sample rate Fixes
** V6.1.20 Icon updates
** V6.1.19 Fix to markers in audio mode
** V6.1.18 Small update to CSV data
** V6.1.17 Attempt to fix usb startup bug
** V6.1.16 CSV saved channel data when using USB (When Paused)
** V6.1.15 Advances in USB management to bring stability
** V6.1.14 Attempt fix for V2.13/14
** V6.1.11 Logic input fix
Price update  Price changed from $7.99 to $5.99.
Price update  Price changed from $4.99 to $7.99.
More downloads  Oscilloscope Pro reached 1 000 - 5 000 downloads
More downloads  Oscilloscope Pro reached 1 000 - 5 000 downloads

What are users saying about Oscilloscope Pro

G70%
by G####:

Great scope paired with the $20 Xprotolab Plain. Has a bug with display of the trigger level marker on my device, but hopeful to get it resolved soon. As mentioned in another review I would love to see some sort of Auto zero level or auto horizontal markers like in the xscopes app on PC. Also, the dual meter function is high on the wishlist. Hoping this app continues to develop rather than dying on the vine like so many others.

D70%
by D####:

Does not work with Xprotolab Plain on Galaxy S7 Android 6.0.1 with powered usb hub or unpowered adapter. With powered hub "no USB devices detected." At least I got refund easily. Please fix and then I'll purchase again. *Update* did not get refund!

Z70%
by Z####:

Works with Samsung Sky Outstanding App

D70%
by D####:

Will purchase again when I get a device.

W70%
by W####:

Just a couple of suggestions 1_ I miss an indicator to see where the 0v level is for each channel. 2_ Option to make lines thicker would be welcome

I70%
by I####:

Usefull!!

X70%
by X####:

Makes a great product (xprotolab portable) even better.

K70%
by K####:

Nice intuitive interface, works just great. Developer very helpful in fixing issues with my Galaxy S. Try it!

X70%
by X####:

I got a audio breakout box the mic I assume reqires power its on 2.5mm jack do I need to put a dummy load on P.S anyone no where I could htc connector

X70%
by X####:

I purchased this and have not been able to use it at all

O70%
by O####:

Nice functionality and works really well. Top programming!!

K70%
by K####:

I just received the Xminilab Portable. After playing with that hardware for a while to familiarize myself with its basics, I downloaded this app to my Nexus 7 (running KitKat) and connected the scope to the Nexus 7 by an OTG cable. The tablet makes for a gorgeous screen for viewing the waveforms. Using drag and pinch to move and change the size of the waveforms is very cool. I find it pretty intuitive. Within a few minutes of playing with the app I could do all of the basics I need.

K70%
by K####:

Work like a charm with the Xminilab and uses great touch interface. Takes a bit of a learning curve, but it's niiice!

K70%
by K####:

Makes a great product (xprotolab portable) even better.

K70%
by K####:

I also use this app, albeit on my Samsung Galaxy S3, with my Gabotronics Xprotolab scope. It takes the scope to a whole other level. It makes using the xprotolab a bit easier. Plus it looks so cool. I showed and demonstrated the app and the device to my automotive instructors and classmates, and it blew their minds. Lol, overall great app, but even greater with an Xprotolab.

T70%
by T####:

I use this app with xminilab and it works flawlessly. When i first installed this app, i assumed, i could store my recordings, but found out I couldn't. Asked the developer whether he had plans of adding this function and he responded promptly. He letting me know it was on the cards. Shortly after the app come out with the ability to save to csv. I was also emailed, letting me know of this update. I'm a happy customer.

K70%
by K####:

I use this app with with Xprotolab by gabotronics and it works great on my Uniden utab71 7" tablet.

E70%
by E####:

I use rs232 to bluetooth adapter ,because my xperia neo is not rooted.

K70%
by K####:

I see the xproto and xmini almost identical. Xproto is working fine so I wonder will the xminilab also work? So that I can put away the magnifing glass man!

S70%
by S####:

Good simple app.

V70%
by V####:

Fortunately this is an active project and It seems the developer is still updating. I need to make time to build my probe so I can give this app a real in depth review

K70%
by K####:

It doesn't work on my rig. LG Spectrum VS920ZV4, Android 2.3.5

K70%
by K####:

Already good, and just got a lot better! (HTC Sensation)

D70%
by D####:

Awesome!!

U70%
by U####:

Great. Performs very well on HTC Incredible. Great UI. More options would be nice but I will not give less than 5 stars for that price. Good job!!

K70%
by K####:

Freezes my Galaxy S and tried it 5 times got a black screen. Had to remove the battery. Just missed refund time limit.

K70%
by K####:

Great app. Works perfect on HTC EVO. A big thank you to the developer!

K70%
by K####:

This does not work at all (It doesn't even boot up)on a Samsung Epic (and it seems I will not be able to get my $8 back.) Is this some kind of con?

K70%
by K####:

Does exactly what is advertiseed. Paid $50 for a similar app for a Windows phone several years ago. Nice job - great price.

B70%
by B####:

Force closes on cliq XT (android 1.5). Too bad, it looked fun.

K70%
by K####:

Not fancy, but gets the job done and controls are slick. For my purposes, being able to manually set the sync delay would be a boon. (Analyzing FSK)


Share The Word!


Rating Distribution

RATING
4.25
81 users

5

4

3

2

1