Intelligent Wireless Data App

Intelligent Wireless Data App is an application software for reading and writing adjustment values and setting values using the Intelligent Wireless Data sensor of a display and a terminal equipped with a NFC sensor (smartphone or tablet PC).

[Supported Terminals]
Terminals that are equipped with NFC-V functions.
Tested terminal : Nexus 4, Nexus 5, Nexus 7(2012), Nexus 7(2013), and Nexus10.

[Supported Displays]
LCD-X981UHD-2
LCD-X841UHD-2
LCD-X981UHD
LCD-X841UHD
LCD-X651UHD-2
LCD-X651UHD
LCD-X551UHD
LCD-X754HB
LCD-X554HB
LCD-X554UNV
LCD-X554UNS-2
LCD-X554UNS
LCD-X554UN
LCD-X555UNS
LCD-X555UNV
LCD-P404
LCD-P484
LCD-P554
LCD-V404
LCD-V484
LCD-V554
LCD-X474HB
LCD-X464UNV
LCD-X464UNS-2
LCD-X464UNS
LCD-X464UN
LCD-P801
LCD-P703
LCD-P553
LCD-P463
LCD-P403
LCD-UN551S
LCD-UN551VS
MDC551C8

[Pre-settings of the display]
1.Check the OSD settings of the display.
"ADVANCED OPTION2" - "INTELLI.WIRELESS DATA" : ON
Performed the following settings as well when writing adjustment and setting values with the display in the standby state.
"EXTERNAL CONTROL" - "LAN POWER" : OFF
"ADVANCED OPTION1" - "INPUT DETECT" : NONE
"ADVANCED OPTION1" - "OPTION SETTING" - "OPTION POWER" : OFF
2. Put the display on standby, or switch off the main power supply.


[Terminal Pre-Settings]
• Validate the NFC functions of the terminal.
Example) Check "Setting" - "Wireless & Network" - "Other..." - "NFC".
• Set the password (4 numerical digits) to be the same as the password of the Intelligent Wireless Data sensor in "Set Password" under "Security Setting" in the Intelligent Wireless Data App.


[Communication with the Intelligent Wireless Data sensor]
Bring the terminal close to the Intelligent Wireless Data sensor and check the position at the bottom of the application screen where the message "The display is detected." appears.


[Reference]
・ The installation location of the Intelligent Wireless Data sensor varies depending on the display. Please refer to the instruction manual of the display for more information.
・ The installation location of the NFC sensor varies depending on the sensor. Please refer to the instruction manual of the terminal for more information.


[Precautions when reading and writing]
・ Please perform reading or writing with the display in a standby state or the main power switched off.
・ Before communication with the display, move the terminal to the position where the message "The display is detected." is displayed and perform reading and writing at that position.
・ To communicate with the display, a password (4 numerical digits) similar to the password of the Intelligent Wireless Data sensor needs to be registered.
・ All items whose check boxes are ticked will be read. Items to be written are those which are enabled and whose check boxes have been ticked. Disabled items will not be written even if their check boxes are ticked.