N.E.A.K. Configurator Pro
$1.79About N.E.A.K. Configurator Pro
** THIS APP IS DEPRECATED FOR JB **
ONLY WITH N.E.A.K. KERNEL!!
(Some basic features now supported on other kernels) :)
*** ROOT & BUSYBOX Required for proper operation of this app ***
This App is for controlling the NEAK kernel options without having to use the CWM Recovery. This App is also used for downloading the NEAK kernel OTA updater App. This Pro App is also for advanced control of key hardware components.
*** IMPORTANT: For "Set on boot" to work you MUST click on "Set on boot" BEFORE clicking "Apply". Just ticking "Set on boot" will not activate set on boot, "Apply" button MUST be pushed after ticking the box. Te ensure "Set on boot" is active, close the app and re-open, and "Set on boot" should still be ticked if it is active. (If it is not ticked and you did hit apply after ticking the box, then your init.d folder is set to read only, and needs to be set to allow writing to this folder) ***
The current options that this Pro App can control are:
Conservative Governor
Lionheart Tweaks (for Conservative Governor)
Lazy Governor
SCHED_MC
Aftr Idle Mode
Ext4 Boost Optimisations
CPU Max/Min Frequencies
CPU Governor and I/O Scheduler
CPU Voltages
GPU Frequencies & Voltages
Second Core Mode Control, including hotplug thresholds
Charging current control
Basic screen gamma & min_bl
Note: NEAK kernel options settings require a reboot for the relevant modules to be loaded or removed
The NEAK kernel options gives 2 options for applying settings, you can apply setting and reboot later, or apply settings and reboot now The NEAK OTA section of this app will show the current installation status of the NEAK OTA Updator App and have a button for downloading the App.
The CPU, GPU, Voltage and Misc options all have the ability to set the settings on boot. The "Set on boot" checkbox must be checked BEFORE applying settings. Once checked it will remain applying all settings on boot until unchecked and apply pressed again.
For help with this app, please go to: http://forum.xda-developers.com/showthread.php?t=1561592
ONLY WITH N.E.A.K. KERNEL!!
(Some basic features now supported on other kernels) :)
*** ROOT & BUSYBOX Required for proper operation of this app ***
This App is for controlling the NEAK kernel options without having to use the CWM Recovery. This App is also used for downloading the NEAK kernel OTA updater App. This Pro App is also for advanced control of key hardware components.
*** IMPORTANT: For "Set on boot" to work you MUST click on "Set on boot" BEFORE clicking "Apply". Just ticking "Set on boot" will not activate set on boot, "Apply" button MUST be pushed after ticking the box. Te ensure "Set on boot" is active, close the app and re-open, and "Set on boot" should still be ticked if it is active. (If it is not ticked and you did hit apply after ticking the box, then your init.d folder is set to read only, and needs to be set to allow writing to this folder) ***
The current options that this Pro App can control are:
Conservative Governor
Lionheart Tweaks (for Conservative Governor)
Lazy Governor
SCHED_MC
Aftr Idle Mode
Ext4 Boost Optimisations
CPU Max/Min Frequencies
CPU Governor and I/O Scheduler
CPU Voltages
GPU Frequencies & Voltages
Second Core Mode Control, including hotplug thresholds
Charging current control
Basic screen gamma & min_bl
Note: NEAK kernel options settings require a reboot for the relevant modules to be loaded or removed
The NEAK kernel options gives 2 options for applying settings, you can apply setting and reboot later, or apply settings and reboot now The NEAK OTA section of this app will show the current installation status of the NEAK OTA Updator App and have a button for downloading the App.
The CPU, GPU, Voltage and Misc options all have the ability to set the settings on boot. The "Set on boot" checkbox must be checked BEFORE applying settings. Once checked it will remain applying all settings on boot until unchecked and apply pressed again.
For help with this app, please go to: http://forum.xda-developers.com/showthread.php?t=1561592
All Application Badges
Paid
app
app
Android
2.3.3+
2.3.3+
Bug
buster
buster
Android app
App History & Updates
What's Changed
- Extra frequencies added to S3 GPU tab
- NEAK Kernel check updated (should now work on AOSP ROMS)
- OTA downloader tab removed from app.
- Extra frequencies added to S3 GPU tab
- NEAK Kernel check updated (should now work on AOSP ROMS)
- OTA downloader tab removed from app.
Price update Price changed from $2.33 to $1.79.
More downloads N.E.A.K. Configurator Pro reached 1 000 - 5 000 downloads
Name changed Name changed! N.E.A.K. Configurator PRO now is known as N.E.A.K. Configurator Pro.
Price update Price changed from $1.79 to $2.33.
What are users saying about N.E.A.K. Configurator Pro
N
by N####:
by N####:
Got this app to use the win!Uv settings. But the CPU section of the app doesn't remember my min & max settings after reboots or just makes them up after hitting apply..
M
by M####:
by M####:
SUPER poor quadrant score. SUPER Slow CPU speed. When comparing with the pevious NEAK i9100 kernel, this is totally rubbish. I think you really need to do something to catch up with others.
A
by A####:
by A####:
What a awesome app. Keep it up guys. Good luck..!
N
by N####:
by N####:
Does the job, great to tweak with but nothing is explained, no documentation other some forum entries you have to googles for. Would have been a nice touch to have seen some love for the app. Loving neak kernel speed! But why such poor care in making app? Typical bloody developers, do you think not understand people may actually need to use this?
R
by R####:
by R####:
Great kernel, great app. Also a good way to support the developers.
X
by X####:
by X####:
Best kernel! I hope in the future we can have a double rom boot with NEAK
R
by R####:
by R####:
Cpu config does not lock cpu frequency. Restore to default after every reboot
R
by R####:
by R####:
NEAK kernel #1
R
by R####:
by R####:
Control app for neak kernel Deprecated?????????......... U just released it 6 month ago and now its deprecated,because u made a similar control app for s3/note2 that also cost money.dam that is greed
R
by R####:
by R####:
Finally the long awaited pro version.. Thx for all the effort.. consider this as a donation ;) like the simplified version of voltage control, though i only use it to change governor and scheduler..
R
by R####:
by R####:
Same with me... Cpu config does not lock cpu frequency. Restore to default after every reboot... :-(
R
by R####:
by R####:
no support for Jelly Bean :((
R
by R####:
by R####:
Not all features work on note 2 with cm. App FC when selecting some tabs.
V
by V####:
by V####:
Got this app to use the win!Uv settings. But the CPU section of the app doesn't remember my min & max settings after reboots or just makes them up after hitting apply..
J
by J####:
by J####:
SUPER poor quadrant score. SUPER Slow CPU speed. When comparing with the pevious NEAK i9100 kernel, this is totally rubbish. I think you really need to do something to catch up with others.
Q
by Q####:
by Q####:
What a awesome app. Keep it up guys. Good luck..!
V
by V####:
by V####:
Does the job, great to tweak with but nothing is explained, no documentation other some forum entries you have to googles for. Would have been a nice touch to have seen some love for the app. Loving neak kernel speed! But why such poor care in making app? Typical bloody developers, do you think not understand people may actually need to use this?
K
by K####:
by K####:
Great kernel, great app. Also a good way to support the developers.
A
by A####:
by A####:
Best kernel! I hope in the future we can have a double rom boot with NEAK
K
by K####:
by K####:
Cpu config does not lock cpu frequency. Restore to default after every reboot
K
by K####:
by K####:
NEAK kernel #1
K
by K####:
by K####:
Control app for neak kernel Deprecated?????????......... U just released it 6 month ago and now its deprecated,because u made a similar control app for s3/note2 that also cost money.dam that is greed
K
by K####:
by K####:
Finally the long awaited pro version.. Thx for all the effort.. consider this as a donation ;) like the simplified version of voltage control, though i only use it to change governor and scheduler..
K
by K####:
by K####:
Same with me... Cpu config does not lock cpu frequency. Restore to default after every reboot... :-(
K
by K####:
by K####:
no support for Jelly Bean :((
Y
by Y####:
by Y####:
Wow What a awesome app. Keep it up guys. Good luck..!
C
by C####:
by C####:
CPU section doesn't work. Got this app to use the win!Uv settings. But the CPU section of the app doesn't remember my min & max settings after reboots or just makes them up after hitting apply..
G
by G####:
by G####:
unhappy . no support for Jelly Bean :((
C
by C####:
by C####:
Had been used comments. SUPER poor quadrant score. SUPER Slow CPU speed. When comparing with the pevious NEAK i9100 kernel, this is totally rubbish. I think you really need to do something to catch up with others.
C
by C####:
by C####:
Cryptic. Does the job, great to tweak with but nothing is explained, no documentation other some forum entries you have to googles for. Would have been a nice touch to have seen some love for the app. Loving neak kernel speed! But why such poor care in making app? Typical bloody developers, do you think not understand people may actually need to use this?
J
by J####:
by J####:
Great Great kernel, great app. Also a good way to support the developers.
C
by C####:
by C####:
Little Problem... Same with me... Cpu config does not lock cpu frequency. Restore to default after every reboot... :-(
I
by I####:
by I####:
Quite good Cpu config does not lock cpu frequency. Restore to default after every reboot
S
by S####:
by S####:
+1 Best kernel! I hope in the future we can have a double rom boot with NEAK
C
by C####:
by C####:
Sweet~ Finally the long awaited pro version.. Thx for all the effort.. consider this as a donation ;) like the simplified version of voltage control, though i only use it to change governor and scheduler..
by P####:
Not all features work on note 2 with cm. App FC when selecting some tabs.