mask design

History masquerade party associated with the festive season Carnival. During the celebration, people crowded the streets of costumes for a party before the party. Costumes used, including striking masks with a variety of shapes and sizes. Party mask design is quite simple, namely the mask covers the upper part of the wearer's face and sometimes embedded in the handle. Read the following steps to create a masquerade party.
Select or create their own mask design.
1.Cetak your mask template. This way, you can print a template that has a lot of detail. It will be more time consuming, but you can enter any amount of detail desired.
Put it on the table. Provide a space which is much wider than the paper template.
2.Rekatkan plastic sheet on top of the template using tape. Make sure the plastic cover all parts of the template and the template can not move underneath.
If there is a problem, attach each end of the template to the table.
3.Rekatkan tulle on top of the plastic. Cloth size should be larger than the template on each side. Not to be fitted in the middle, the most important need is greater.
If not available tulle, you can use also cheesecloth. But the cloth harder and easier to work with.
4.Jiplak template using fabric paint. For the first mask, use only one color. Be careful, do not let your hands touch the template so that smear the paint.
If you use more than two colors, the colors may be changed when they met.
Allow to dry overnight.
5.Potong mask. First make sure the paint had dried completely, then peel off the table tulle. Be careful when cutting each edge of the mask and part of the eye sockets.
6.Tempelkan tape to the edges. Cut two pieces of tape along each 51 cm. Give a little glue on the end and stick it on the mask. Allow to dry for 1-2 hours.
You can cut the ribbon to be shorter, but make sure first that the ribbon will be tied in the head before being cut.