LSIS Drive Sim

※ Introduction
- ‘LSIS Drive Sim’ provides users to change the setting and shows the result and status of the motor how it reacts.
- Users can receive full support by e-mailing service and benefit from immediate feedback from LSIS.

※ Supported functions
Only drive functions listed below are currently implemented in this version.

1. Basic Tasks
- Frequency reference source configuration for the keypad
- Motor operation display options
- Multi-step speed (frequency) configuration
- Command source configuration for keypad buttons
- Command source configuration for terminal block inputs
- Local/remote switching via the [ESC] key
- Motor rotation control
- Automatic start-up at power-on
- Automatic restart after reset of a fault trip condition
- Acc/Dec time configuration based on the Max. Frequency
- Acc/Dec time configuration based on the frequency reference
- Multi-stage Acc/Dec time configuration using the multi-function terminal
- Acc/Dec time transition speed (frequency) configuration
- Acc/Dec pattern configuration
- Acc/Dec stop command
- Linear V/F pattern operation
- Manual torque boost
- Automatic torque boost
- Accelerating start
- Deceleration stop
- Stopping by DC braking
- Free-run stop
- Power braking
- Start/maximum frequency configuration
- Upper/lower frequency limit configuration
- Frequency jump

2. Advanced Tasks
- Jog operation
- Up-down operation
- 3-wire operation
- Safety operation mode
- Dwell operation
- Slip compensation
- Auto-tuning
- Sensorless vector control
- Auto restart operation ※ Introduction
- 'LSIS Drive Sim' provides users to change the setting and shows the result and status of the motor how it reacts.
- Users can receive full support by e-mailing service and benefit from immediate feedback from LSIS.

※ Supported functions
 Only drive functions listed below are currently implemented in this version.

1. Basic Tasks
 - Frequency reference source configuration for the keypad
 - Motor operation display options
 - Multi-step speed (frequency) configuration
 - Command source configuration for keypad buttons
 - Command source configuration for terminal block inputs
 - Local / remote switching via the [ESC] key
 - Motor rotation control
 - Automatic start-up at power-on
 - Automatic restart after reset of a fault trip condition
 - Acc / Dec time configuration based on the Max. Frequency
 - Acc / Dec time configuration based on the frequency reference
 - Multi-stage Acc / Dec time configuration using the multi-function terminal
 - Acc / Dec time transition speed (frequency) configuration
 - Acc / Dec pattern configuration
 - Acc / Dec stop command
 - Linear V / F pattern operation
 - Manual torque boost
 - Automatic torque boost
 - Accelerating start
 - Deceleration stop
 - Stopping by DC braking
 - Free-run stop
 - Power braking
 - Start / maximum frequency configuration
 - Upper / lower frequency limit configuration
 - Frequency jump

2. Advanced Tasks
 - Jog operation
 - Up-down operation
 - 3-wire operation
 - Safety operation mode
 - Dwell operation
 - Slip compensation
 - Auto-tuning
 - Sensorless vector control
 - Auto restart operation