About Cool DIY Duct Tape Tool Belt
A duct tape toolbelt is a great project for DIY enthusiasts and also makes a great gift. This toolbelt is waterproof and spill proof, great for just about anyone. You can make them in the colors of your choice and add extra trim to accent, if you like. This project takes under an hour to make, and the finished product is super cool and practical.
Tools and supplies you need to make a duct tape tool belt:
- Exacto or Utility knife
- Cutting mat or clean nonstick surface
- Ruler
- One or more rolls of Duct Tape in the color(s) of your choice
Step 1: Make duct tape sheets
Create two duct tape fabric sheets that measure 9 x 18 inches. Also create a belt strip that measures 15 inches longer than your waist. If you are going to use more than one color for your toolbelt, be sure to use an accent color for the belt. You need an additional 2 3: strips the same color as the belt strip. These will be the buckle.
Step 2: Fold sheet, tape and make pocket
Take one of your sheets and fold it at 8 inches, back to the center of the sheet. Now, from the top of the part you folded over, fold another inch back over. Close the pocket with a piece of duct tape that is cut in half.
Step 3: Repeat for second pocket
Repeat this step with the other 918 piece to make a second pocket.
Step 4: Tape pockets together
Lay the pockets side by side and tape them together, on front and on back. I am using the green accent color again, but you can choose your own. Reinforce the fold across the front with one long piece of tape.
for further information and detail tutorial, download this now and grab what you want.
please enjoy this Cool DIY Duct Tape Tool Belt and give us any feedback.This unique project is not your average duct tape construction. By creating the pattern for this knife sheath to share with you, but wanted to let you know the possibilites are limitless when you use this sewing method. You can get creative and sew all kinds of duct tape projects this way. Anything that you see sewn out of leather or other thick material can probably be made from duct tape fabric.
How to Make The Sheath:
1. Start by printing out our knife sheath pattern .pdf file for this project.
2. Make your 8.511 duct tape sheet in the color of your choice. If you wish, you can add a third layer of tape to increase durability.
3. Cut out the pieces of the pattern, leaving a little bit of white border around them, then tape them to your duct tape sheet.
4. Using your scissors, cut out the pieces of the pattern taped to the duct tape. You should now have the three pieces for your sheath.
5. Using your hole punch, punch through each dot on the pattern, trying to keep them evenly spaced like they are on you pattern. Continue punching until you have punched all the holes in both pieces.
6. Using your Xacto knife, cut through the two lines on the pattern, the ones between the two circles.
7. Now you will need your rivet and snap as well as the third small piece you cut from the pattern. This is the strap that helps hold the knife in place. Place the rivet through the two holes and use the hammer to set it and attach the small piece to the holster.
for further information and detail tutorial, download this now and grab what you want.
please enjoy this Unique DIY Duct Tape Knife Sheath and give us any feedback.