Granite Countertops for Android
Step 1
Take the measurements of the countertop. If you decide to cut the granite yourself, you'll need a wetsaw that's waterfed with a diamond blade and a grinder to finish the job. For granite that is 1/2 inch thick or less, use a 7-inch blade or larger. You can often rent these. Never cut granite with a dry cut. The job is messy, so do it where you don't mind water splashing. Make sure you cut and polish all the stone to fit the countertop area and smooth the edges before you begin.
Step 2
Remove all the old fixtures, the old countertop and the sink to prepare for the installation of the granite countertops. Either glue in or screw on the sink to the frame. Use a putty knife to loosen the glue.
Step 3
Take out any of the appliances that might be in the way. You need plenty of room, and this simple task makes the job a lot easier. Once you remove the old countertop, you should reinstall the dishwasher before you put in the granite countertop.
Step 4
Spread the appropriate epoxy for granite onto the tops of the cabinet. Secure the help of friends and family to carry the countertop into the house.
Step 5
Install the sink that mounted under the granite. Use the appropriate epoxy adhesive to glue the sink to the underside of the granite. Clamp it into place with clamps and a long flatbar to hold it until the epoxy dries.
Step 6
Install the backsplash by using an adhesive to glue it to the wallboard. Seal the granite with a special spray. You'll have to do this once a year to keep it from absorbing oils.
Are you looking to install granite countertops? Learn about these types of countertops at our application of Granite Countertops. Just download it and you can many ideas about granite countertops!
Enjoy!