FoolBox Lite
Free AppAbout FoolBox Lite
Let’s face it, DE burring just grinds my gears. It adds unnecessary time to a production sequence, it drives overall cost, and it’s not an effective use of personal manpower. The solution to this problem is FoolBox. This small but powerful app not only gives you finger gliding satisfaction RIGHT OUT OF THE MACHINE; it also automatically calculates any chamfer angle (OD/ID) and displays the corresponding G-Code. Now in English Please. You may have a print from a customer that calls a 17 degree chamfer on an OD and a 32 degree bore chamfer - no burrs allowed! FoolBox gets the job done in seconds. Mix and match any combination of angles you desired and get the same baby bottom finish over and over again. Take FoolBox on the go with your Android mobile device and produce perfection anytime, anywhere. Have your shop stand out from the rest with FoolBox, because after all, you are selling quality, aren’t you?
All Application Badges
Free
downl.
downl.
Android
1.6+
1.6+
Android app
App History & Updates
What's Changed
• Menu system added (Button for Tablets )
• Cycle Time function added ( Perfect Cycle )
• Feedback function added
• G & M code references Completed (turning & milling)
Known issues: Feedback form may be difficult to exit out of comments box for some devices.
Work around: Use your device "Back" key after entering feedback then send.
Please leave us feedback and ratings for the app.
• Menu system added (Button for Tablets )
• Cycle Time function added ( Perfect Cycle )
• Feedback function added
• G & M code references Completed (turning & milling)
Known issues: Feedback form may be difficult to exit out of comments box for some devices.
Work around: Use your device "Back" key after entering feedback then send.
Please leave us feedback and ratings for the app.
More downloads FoolBox Lite reached 10 000 - 50 000 downloads
More downloads FoolBox Lite reached 5 000 - 10 000 downloads
Version update FoolBox Lite was updated to version Version
Version update FoolBox Lite was updated to version Version: 0.16
What are users saying about FoolBox Lite
R
by R####:
by R####:
CNC 101 boys ... waste of time... if you need a app to do this maybe you shouldn't be a machinist....but plus side it was free i deleted but it was free
R
by R####:
by R####:
Would anybody line to help me master programming this new magnam cmc lathe machine
R
by R####:
by R####:
Mark, i agree! It would be OK for a persons very first day, maybe first hour. Someone that is totally clueless to CNC work. Sorry if I've offended you!!!
R
by R####:
by R####:
Only good part is the code lists
R
by R####:
by R####:
setup men
E
by E####:
by E####:
Can't read corner break red on grey
J
by J####:
by J####:
C nc milling
V
by V####:
by V####:
Waste of time
T
by T####:
by T####:
:-)
Z
by Z####:
by Z####:
Really needs an option to work in metric units!
G
by G####:
by G####:
Any plans on adding OD option and also the ability to change corner break radius on both beginning and end of angle? If so, this small app would solve 95% of most programming needs. Quick and easy angle to radius calculation, possibly with option to use either I and K or just R. For that I would pay maybe upwards of 5-10 bucks possibly. I like your layout and graphics, pretty clean, although the red text does appear a bit hard to read. Thanks devs, please add more this is just what I have been looking for
Z
by Z####:
by Z####:
Thanks for your help.
J
by J####:
by J####:
Easy
B
by B####:
by B####:
This app has solved all issues with having to use a file at the end of running your part. Keep it coming techbench.
Q
by Q####:
by Q####:
Good Any plans on adding OD option and also the ability to change corner break radius on both beginning and end of angle? If so, this small app would solve 95% of most programming needs. Quick and easy angle to radius calculation, possibly with option to use either I and K or just R. For that I would pay maybe upwards of 5-10 bucks possibly. I like your layout and graphics, pretty clean, although the red text does appear a bit hard to read. Thanks devs, please add more this is just what I have been looking for
U
by U####:
by U####:
Awesome This app has solved all issues with having to use a file at the end of running your part. Keep it coming techbench.
by U####:
Besides the g and m codes I can't find any use may be a tutorial or demo