Epson iLabel
Free App
Advertisements
About Epson iLabel
Smarter labelling…
Epson iLabel makes it easy to create, store, and print labels from your Android phone or tablet. Use your smart device's functionality, including voice transcription, contacts and image gallery, to add a new dimension to your labelling experience. Users can easily share label makers with the Epson iLabel app.
The Epson iLabel app works with the Epson LabelWorks LW-600P and LW-1000P. To buy one of these label makers or LC tapes, please visit www.epson.com or contact your local supplier.
[Main Features]
- Create, edit, and print labels wirelessly
- More than 100 label design templates and over 400 symbols are available
- Barcode printing: eight types supported
- Generate and print QR codes
- Voice transcription (enabled by your Android OS) *1
- Quick timestamp function
- Drawing tool; sketch labels using your device's touch interface
- Select and print from a variety of pre-defined, commonly used labels
- Camera-based preview tool: digitally see your label on an item before printing*2
- Insert images from your image gallery (two-tone image conversion)
*1 If your device supports it, you can use voice transcription to input
text into the Epson iLabel app.
*2 If only front camera is available, camera-based preview tool can not be used.
[Additional Feature]
・ The status of your label maker can be checked on your smart device (set tape width, errors, and connection status)
・ Up to 100 created labels can be saved and reused
・ Up to 100 printed labels can be automatically saved and reused
・ Data can be shared with other smart devices through email
[Supported Models]
LW-600P / LW-1000P / LW-PX800
[Supported Device]
Android 4.0 or later
Screen definition should be more than 800x480 pixels
*Note: More information about Epson iLabel and LabelWorks solutions is available on Epson’s website.
-----
We welcome your feedback.
Unfortunately, we cannot reply to your e-mail.
-----
Personal information that has been collected by "Send email",
it will not be used for any purpose other than the application improvement.
Epson iLabel makes it easy to create, store, and print labels from your Android phone or tablet. Use your smart device's functionality, including voice transcription, contacts and image gallery, to add a new dimension to your labelling experience. Users can easily share label makers with the Epson iLabel app.
The Epson iLabel app works with the Epson LabelWorks LW-600P and LW-1000P. To buy one of these label makers or LC tapes, please visit www.epson.com or contact your local supplier.
[Main Features]
- Create, edit, and print labels wirelessly
- More than 100 label design templates and over 400 symbols are available
- Barcode printing: eight types supported
- Generate and print QR codes
- Voice transcription (enabled by your Android OS) *1
- Quick timestamp function
- Drawing tool; sketch labels using your device's touch interface
- Select and print from a variety of pre-defined, commonly used labels
- Camera-based preview tool: digitally see your label on an item before printing*2
- Insert images from your image gallery (two-tone image conversion)
*1 If your device supports it, you can use voice transcription to input
text into the Epson iLabel app.
*2 If only front camera is available, camera-based preview tool can not be used.
[Additional Feature]
・ The status of your label maker can be checked on your smart device (set tape width, errors, and connection status)
・ Up to 100 created labels can be saved and reused
・ Up to 100 printed labels can be automatically saved and reused
・ Data can be shared with other smart devices through email
[Supported Models]
LW-600P / LW-1000P / LW-PX800
[Supported Device]
Android 4.0 or later
Screen definition should be more than 800x480 pixels
*Note: More information about Epson iLabel and LabelWorks solutions is available on Epson’s website.
-----
We welcome your feedback.
Unfortunately, we cannot reply to your e-mail.
-----
Personal information that has been collected by "Send email",
it will not be used for any purpose other than the application improvement.
All Application Badges
Free
downl.
downl.
Bug
buster
buster
Android app
App History & Updates
What's Changed
-Supported Android 7.0 / 7.1
-Fixed bugs
-Supported Android 7.0 / 7.1
-Fixed bugs
More downloads Epson iLabel reached 50 000 - 100 000 downloads
Version update Epson iLabel was updated to version 1.2.3
Version update Epson iLabel was updated to version 1.2.1
Version update Epson iLabel was updated to version 1.1.1
What are users saying about Epson iLabel
K
by K####:
by K####:
I was hoping I could easily setup labels where I could specify the distance between the center of two or three sections of text, i use this to make labels for data and phone outlets. so it reads: "21 22 23" where the spacing doesn't change and the center of the text is always at that measurement. Secondly circuit breakers in a switchboard are 19mm wide for a single, 38mm for a double and 57mm for a triple etc , so, a way to define a label to fit inside those measurements or a way to specify them would be great PLEASE add these features....
U
by U####:
by U####:
Am unable to find printer. Doesnt even search
K
by K####:
by K####:
It's basically handicapped, not much I can work with it, I still need my laptop to do proper adjustment and design.
K
by K####:
by K####:
Bagus aplikasi nya jadi mudah bikin label nya.
K
by K####:
by K####:
Ugly but functional.
F
by F####:
by F####:
Support for L385 series? Please
F
by F####:
by F####:
Good
K
by K####:
by K####:
Every Android update seems to break this app turning an awesome printer into a doorstop. Eventually Epson fixes it, but the app was broken for 4+ months when 6.0.1 came out. The app works but can be slow and buggy... Epson needs to hire some better developers.
V
by V####:
by V####:
Doesn't work. Every time I open it it crashes my phone completely, where I have to restart the device.
T
by T####:
by T####:
Every Android update seems to break this app turning an awesome printer into a doorstop. Eventually Epson fixes it, but the app was broken for 4+ months when 6.0.1 came out. The app works but can be slow and buggy... Epson needs to hire some better developers.
H
by H####:
by H####:
Can't select inch to millimeter.
T
by T####:
by T####:
use it to create labels for my patchbay. biggest problem with I'm having is that you can save the labels to google drive, but i do not see a way to recall the labels in the application. can only see the labels that were saved locally. needs to have a straight forward 'load label' menu item that lets you retrieve a label from the external storage options that are made available when you use the 'save' feature. seems like common sense....
Q
by Q####:
by Q####:
Requires every invasive permission available just to print some labels. Must be spyware.
Y
by Y####:
by Y####:
It will not work.
T
by T####:
by T####:
Emits 1/2 inch of tape before every label, littering the workplace, not to mention the expense. Must be a habit taken from inkjet engineers.
T
by T####:
by T####:
Please include a QRscanner in your QRCode section on the app. This would allow potential duplication of QR labels which in our industry is very much a requirement.
F
by F####:
by F####:
블루투스는 잡히는데 select printer 에서 안보여. 꼬물이지 뭐
Q
by Q####:
by Q####:
But this is asking for WAY too many permissions.
N
by N####:
by N####:
Useless for me otherwise
C
by C####:
by C####:
This printer is easy to operate you can carry it wherever you go and since I'm a photographer you can print ID pictures wallet border for 4X6
P
by P####:
by P####:
Would like the ability to scan qr codes created on the web and have it print a label of it. Also have been unable to create a qr code of a hyperlink successfully.
L
by L####:
by L####:
블루투스는 잡히는데 select printer 에서 안보여. 꼬물이지 뭐
C
by C####:
by C####:
I purchase so I could print lugaug lables and CD/DVD's etc still have to set up CD like the R300 I thought you just put in cd or DVD and print but not so.
C
by C####:
by C####:
Doesn't work on Epson 730.
X
by X####:
by X####:
Good enough for us
C
by C####:
by C####:
Only two printer models supported
U
by U####:
by U####:
And still no cable wrap/labels.
M
by M####:
by M####:
What? No option to print cable wraps with this software? That is one of the main reasons I got this one!
L
by L####:
by L####:
The software is very limited. ..needs an update..fix the print size... a better size selection... has small print on a big label
M
by M####:
by M####:
Only two printer models supported
W
by W####:
by W####:
Won't allow me to connect with a printer
K
by K####:
by K####:
I love the printer i love this app and i love making labels for everything the printer is nice and quiet to great job well done
M
by M####:
by M####:
Tool automatically scales text to different size automatically which is annoying for me. It needs finer font size control so that labels look consistent with one or more lines of text.
M
by M####:
by M####:
For some people people who needs a decent printer for the work place this software definitely needs improvement. For me I need to have a barcode with the name of the product below the barcode for inventory. Also I need it for barcoding equipment in the field so while doing a inspection it is certain that all the devices get tested and the technician can verify what the device is by name too not just by the devices serial number. The warning labels need a option to add more to the list a few is not enough.
F
by F####:
by F####:
Connection issue it is not giving me an option to search for printer horrible app
K
by K####:
by K####:
Works well
by K####:
Only two printer models supported