Epson Run Connect
Free App
Advertisements
About Epson Run Connect
◆ Important News
If using Android 6.0, please use 6.0.1 or later.
Bluetooth pairing with wrist device may not function properly with 6.0.0.
◆ Description
Run Connect is a free application for EPSON GPS wrist devices (GPS Sports Monitor) (hereinafter called wrist devices).
You can connect the wrist device to Android by Bluetooth SMART and upload the data measured by the wrist device to the web service "RUNSENSE View" that allows you to visually check the data. This is useful when you want to check the detailed data immediately after a competition or training, or when you want to upload data while you are away from home.
◆ Main functions of Run Connect
[Wrist device data listing function]
- Wrist device data list
The function acquires data from the wrist device and displays a list.
The function resisters simplified data* to RUNSENSE View as it acquires the data.
- Wrist device data check
You can select a data item and check the registered simplified data on RUNSENSE View.
- Data upload
You can select a data item and upload it to RUNSENSE View
*Simplified data: Only measurement data for each lap that does not contain position information.
*You need to perform the "data upload" process to upload the complete (measurement data in indoor mode does not contain the position information).
[RUNSENSE View connection function]
- RUNSENSE View connection
You can log in to RUNSENSE View using a browser with the account set with the "Account management function".
[Account management function]
- Setting the RUNSENSE View account
You can set the account to log in to RUNSENSE View (the account is also required for the upload).
- Cancelling the RUNSENSE View account
You can cancel the account to log in to RUNSENSE View (this is not a resignation from RUNSENSE View by deleting the account).
- Creating a new RUNSENSE Viewaccount
You can create a new account when using RUNSENSE View for the first time.
You can also use this function when you have forgotten the login ID or password.
*You can continue to use RUNSENSE View accounts that have previously been registered.
[Pairing function]
- Starting the pairing process with the wrist device
You can pair your iPhone and the wrist device.
- Unpairing the wrist device
You can unpair your iPhone and the wrist device.
◆ Notes on uploading data
It may take a while to upload large measurement data that contains position information from the wrist device.
*Uploading measurement data for an hour's running takes approximately 3 to 10 minutes.
◆ Supported models
SF-810, SF-710, SF-510, SF-310 and SF-110
We welcome your feedback. Unfortunately, we cannot reply to your e-mail.
If using Android 6.0, please use 6.0.1 or later.
Bluetooth pairing with wrist device may not function properly with 6.0.0.
◆ Description
Run Connect is a free application for EPSON GPS wrist devices (GPS Sports Monitor) (hereinafter called wrist devices).
You can connect the wrist device to Android by Bluetooth SMART and upload the data measured by the wrist device to the web service "RUNSENSE View" that allows you to visually check the data. This is useful when you want to check the detailed data immediately after a competition or training, or when you want to upload data while you are away from home.
◆ Main functions of Run Connect
[Wrist device data listing function]
- Wrist device data list
The function acquires data from the wrist device and displays a list.
The function resisters simplified data* to RUNSENSE View as it acquires the data.
- Wrist device data check
You can select a data item and check the registered simplified data on RUNSENSE View.
- Data upload
You can select a data item and upload it to RUNSENSE View
*Simplified data: Only measurement data for each lap that does not contain position information.
*You need to perform the "data upload" process to upload the complete (measurement data in indoor mode does not contain the position information).
[RUNSENSE View connection function]
- RUNSENSE View connection
You can log in to RUNSENSE View using a browser with the account set with the "Account management function".
[Account management function]
- Setting the RUNSENSE View account
You can set the account to log in to RUNSENSE View (the account is also required for the upload).
- Cancelling the RUNSENSE View account
You can cancel the account to log in to RUNSENSE View (this is not a resignation from RUNSENSE View by deleting the account).
- Creating a new RUNSENSE Viewaccount
You can create a new account when using RUNSENSE View for the first time.
You can also use this function when you have forgotten the login ID or password.
*You can continue to use RUNSENSE View accounts that have previously been registered.
[Pairing function]
- Starting the pairing process with the wrist device
You can pair your iPhone and the wrist device.
- Unpairing the wrist device
You can unpair your iPhone and the wrist device.
◆ Notes on uploading data
It may take a while to upload large measurement data that contains position information from the wrist device.
*Uploading measurement data for an hour's running takes approximately 3 to 10 minutes.
◆ Supported models
SF-810, SF-710, SF-510, SF-310 and SF-110
We welcome your feedback. Unfortunately, we cannot reply to your e-mail.
All Application Badges
Free
downl.
downl.
Android
4.3+
4.3+
Bug
buster
buster
Android app
App History & Updates
What's Changed
- Various bug fixes.
- Various bug fixes.
Version update Epson Run Connect was updated to version 1.9.2
Version update Epson Run Connect was updated to version 1.7.2
Version update Epson Run Connect was updated to version 1.6.0
More downloads Epson Run Connect reached 10 000 - 50 000 downloads
What are users saying about Epson Run Connect
N
by N####:
by N####:
Utterly useless. Will not connect my phone and device. Pathetic.
F
by F####:
by F####:
Its ok ish I cant get any of my stuff from samsung s3 or S5 mini over to Strava despite linking both accounts. The watch is brilliant the app needs alot of work. What does no target data mean!
N
by N####:
by N####:
It is a shame! Always fails to pair. Have to enter the code thousand times
V
by V####:
by V####:
I use Strava so not looking for much from this app. Just need it to transfer data from my watch to Strava which it does. The upload speed needs to be improved over Bluetooth if possible and also the number of button presses to start an upload needs to be reduced to just the one. No need for more.
N
by N####:
by N####:
Can't even register, it isn't even an app
P
by P####:
by P####:
月別ダッシュボードで先月分を見ようとすると、拡大ボタンが邪魔でセットがおせない。GPSは2回測位失敗しないと認識しないし、機能追加要らないから既存機能をスムーズに使いこなせるようにしてほしい。
Y
by Y####:
by Y####:
What is up with the fishy permissions, why does this need acess to my call info...
F
by F####:
by F####:
Especially the setup process and graphics. The Bluetooth data sync is extremely slow.
G
by G####:
by G####:
So finally, I just figure it out regarding how to pair the phone with the watch, for me it's SF-810V. You need to enable BT on the phone, enter pairing mode on the watch, then launch this app and perform pairing function WITH IN this app (3 vertical dots at upper right corner of main screen / Pairing)
N
by N####:
by N####:
The watch doesn't even pair with my phone anymore. I have a note 5, and it doesn't pair, but yet it pairs with my s5... ui is painful to navigate, and uploading is almost not worth it.
Y
by Y####:
by Y####:
It says you need Android 6.0.1 where on my phone (Moto E) last released version is 6.0... weird
Y
by Y####:
by Y####:
The functions of watch and app are so limited. There is no wise advice to max the data. You guys need to work harder and learn from peers.
Y
by Y####:
by Y####:
Software folks, need you to actually work. Needs to fix the bugs not your computer desk
V
by V####:
by V####:
Your English in the UI is terrible, often I don’t have a slightest clue what a specific item might mean. Also uploading must be much easier, not one by one.
Y
by Y####:
by Y####:
When syncing with Strava the activity is no longer private by default as of the 5th of April.
Y
by Y####:
by Y####:
This is far too cluttered. It requires stripping right back to a simpler interface. I would say it's not even an app but a Web portal. It's not very intuitive. If you want to see how it should be done, fitbit's app is probably the best I've used. All data on one screen. Simple layout, great user friendly syncing. This app could be so much more.
M
by M####:
by M####:
Won't connect to my HTC M9 phone. For a corporation the size of Epson this is a poor app. Have a GPS watch that can't receive data from
F
by F####:
by F####:
Does not complete pairing HTC ONE M9 Marshmallow 6.0.1
Y
by Y####:
by Y####:
13 Feb 2016 - latest version of the app still has the same issues, so it is impossible to pair the watch to the mobile.... come on Epson!!!! earlier post - Seems to still have issues pairing with Android 5.1 and Smart Lock - My Lenovo P70 will connect one time only and thereafter refuse to link to the watch - EPSON, please fix this bug. Great Watch!!! would be 5 stars if it worked - One nice feature is that uploaded runs can also sync directly to Strava and a few other running apps ( see linked Apps)
Y
by Y####:
by Y####:
Doesn't work with Marshmallow & saying to use 6.0.1 is not a fix as that is something I cannot do until/if the manufacturer releases it for my phone. Please fix this for Android 6.0.
Y
by Y####:
by Y####:
Please solve this issue, as we are many people having an issue to import data
N
by N####:
by N####:
New update gives a nice UI change, but this app struggles to be really useful. It works okay but is not intuitive to use. Things like changing the workout faces have difficult to understand labels with no explanations, and now there are main features in the app that don't work with my 810, like the activity tracking. Love the watch but I'd rather them fix software functionality than just give it a better UI.
N
by N####:
by N####:
This app is driving me mad. It keeps bombing out when I try to change the screens on my SF-810.. every time!!!!
N
by N####:
by N####:
Seems to still have issues pairing with Android 5.1 and Smart Lock - My Lenovo P70 will connect one time only and thereafter refuse to link to the watch - EPSON, please fix this bug. Great Watch!!! would be 5 stars if it worked - One nice feature is that uploaded runs can also sync directly to Strava and a few other running apps ( see linked Apps)
N
by N####:
by N####:
Login ID keeps saying that they don't match when i can see they are exactly the same. So i can't get past the very initial part of this app, nice one.
N
by N####:
by N####:
Bit slow uploading but otherwise everything works as expected
K
by K####:
by K####:
Watch app sucks! Won't allow set up. Constantly having to try to register and it still doesn't work. Useless. Annoying. Crap App. Defeats the whole purpose of the apparent convenience of the watch. Don't waste your time installing.
by U####:
Unable to register, or pair devices despite numerous attempts. Very poor.