藍牙MIDI

V100B001
-初始版本
V100B002
-可支援同時播放來自BLE MIDI Device 的訊息
- 新增升降半音指令，新增調節播放音量指令
V100B003
-修正彈奏某些音時會閃退現象
V100B004
-新增第二音色
-清除訊息指令改為長按訊息視窗
V100B005
-移除第二音色
-調整介面



V100B003
-修正彈奏某些音時會閃退現象
V100B004
-新增第二音色
-清除訊息指令改為長按訊息視窗
V100B005
-移除第二音色
-調整介面
 
Android App CW MIDI 程式說明
主畫面

上方攔位：
1. 選擇裝置: 選擇 BLE MIDI Device ，程式會自動過濾只搜尋BLE MIDI Service Device，並且也相容市面上其他BLE MIDI Device。
2. 斷線: 與BLE MIDI Device 斷線。
3. 裝置資訊: 連線後查詢BLE MIDI Device相關資訊。
4. Key : 顯示升降音後的相對位置

中間攔位
1. +12/-12/+1/-1: 因應行動裝置介面有限，故設計此按鈕，按下時會升/降/八度音/半音 。
(假如原本音高為 C5 ，按下+12原本位置變成 C6 ，按下-12原本位置變成 C4)
(假如原本音高為 D5 ，按下+1原本位置變成 D#5 ，按下-1原本位置變成 C#5)
2. 讀取: 程式剛進入時，會載入內建的音樂資料庫數據(隨不同裝置速度不一)
A. 載入未完成前，如彈奏已載入的數據，視為有效彈奏。會同時傳送BLE MIDI data 及播放出聲音。
B. 載入未完成前，如彈奏未載入過之數據，視為無效彈奏。此時不會播放出聲音，但會傳送BLE MIDI data。
3. 力度: 調整後將影響到遠端BLE MIDI Device 彈奏力度。
4. 音量: 可調整播放大小聲。
右上方攔位
1. 顯示MIDI訊息
如狀態為 Note ON ，表示接收到BLE MIDI Server 端彈奏鍵盤音高訊息，此時會播放聲音。
如狀態為 Note OFF ，表示接收到BLE MIDI Server 端彈奏鍵盤後放開訊息。
※其餘狀態可參考 MIDI protocal
(欄位會顯示Status = 0x?? , Command1= 0x?? Command2= 0x??)
長按可清除MIDI訊息

下方攔位
MIDI鍵盤彈奏:
彈奏時，如未連接藍芽，訊息將無法傳出，但一樣能播放出聲音。

程式相容性:
相容於 Android 4.3 以上版本之手機。
實際實測皆相容裝置:
Samsung Tab 4 7.0 , ASUS ZenFone2 , 紅米 Note 2, Sony Z3, Nexus 5X, HTC Butterfly s V100B001
-initial version
V100B002
- Supports playback messages from BLE MIDI Device at the same time
- New lift semitones instruction, the new instruction to adjust the playback volume
V100B003
- Flash back phenomenon will amend certain sound when playing
V100B004
- Added second tone
- Long press to clear the message instruction message window
V100B005
- Remove the second tone
- Adjustment Interface



V100B003
- Flash back phenomenon will amend certain sound when playing
V100B004
- Added second tone
- Long press to clear the message instruction message window
V100B005
- Remove the second tone
- Adjustment Interface

Android App CW MIDI Program Description
Home screen
 
Bit above the bar:
1. Select Device: Select BLE MIDI Device, the program will automatically filter Search BLE MIDI Service Device, and is also compatible with other market BLE MIDI Device.
2. break: the BLE MIDI Device disconnected.
3. Device Information: After the connection query BLE MIDI Device Info.
4. Key: shows the relative position of the elevator after the tone

Intermediate stopped position
1. + 12 / -12 / + 1 / -1: In response to the limited mobile device interface, so the design of this button, when pressed will rise / fall / octave / semitone.
(If the original pitch for the C5, press +12 original position becomes C6, press the -12 position had become C4)
(If the original pitch for the D5, press +1 original position becomes D # 5, press the -1 position had become C # 5)
2. Read: When the program has just entered, will load the built-in music library data (with different devices at different speeds)
A. Loading not completed before, such as playing the loaded data considered valid play. BLE MIDI data simultaneously transmit and play a sound.
B. loaded before the completion, as the data had not been loaded play, play as invalid. At this time the sound will not play, but will send BLE MIDI data.
3. intensity: Adjust will affect the distal BLE MIDI Device playing strength.
4. Volume: to adjust the size of the played sound.
Bar at the top right position
1. Display MIDI messages
If the status is Note ON, indicates that the received BLE MIDI Server-side play the keyboard pitch message, then will play the sound.
If the status is Note OFF, indicates the reception BLE MIDI Server side after playing the keyboard release message.
※ remaining state may refer to MIDI protocal
(Column shows Status = 0x ??, Command1 = 0x ?? Command2 = 0x ??)
Long press to clear the MIDI message

Elam bit below
MIDI keyboard play:
When playing, Bluetooth is not connected, the message will not be heard, but the same can play a sound.

Program Compatibility:
Compatible with Android 4.3 or higher version of the phone.
The actual measured all compatible devices:
Samsung Tab 4 7.0, ASUS ZenFone2, red rice Note 2, Sony Z3, Nexus 5X, HTC Butterfly s