Quanta Monitor

Quanta Monitor Free App

Rated 4.13/5 (594) —  Free Android application by Cellraid Ltd

Advertisements

About Quanta Monitor

QUANTA Monitor is a free Health and Fitness application for those who are interested in promoting healthy environment by following up and limiting their exposure to radiofrequency (RF) emission from their phones.

Quanta Monitor is based on Cellraid's proprietary QUANTA Algorithm that has been validated in extensive laboratory tests to accurately estimate RF emission from mobile devices. QUANTA Monitor is the first technological innovation based application in the world measuring the users RF exposure continuously both in real time and cumulatively. QUANTA Monitor takes into account all RF emission including the invisible emission caused by data usage, a major source of RF emission in modern smart phones. It runs invisibly in the phone and you can see on the display if the governmental limits (SAR limits) for RF emission from the phones are exceeded.


FEATURES:

Real time RF emission from the mobile device and actual RF exposure
----------------------------------------------------------------------------------------------
QUANTA Monitor is an application that enables you to monitor radiofrequency (RF) emission from your mobile device in real time and further to monitor how much of the RF emission you are actually exposed to in real time.
Measures obtained are:
- Real time power density (μW/m2) from the mobile device
- Real time SAR (W/kg) from the mobile device
- Real time exposure to the RF emission (given both in SAR and power density values)

RF emission measuring from the mobile device (power density and SAR) takes place continuously, but actual exposure to RF emission is considered to take place and calculated only when the device is held close to the body. This differentiation is facilitated by the ability of QUANTA Monitor to detect the position of the mobile device, that is whether the device is in a close proximity (against the head or in a hand, lap or in a pocket) or further away from the body, for example on a table.

Cumulative exposure to RF emission
-------------------------------------------------
In addition to real time estimates QUANTA Monitor calculates your cumulative exposure to RF emission during different time intervals (hour, day, week, month).

Cumulative RF exposure is calculated as a sum of power density values in a certain time interval (μWh/m2). Cumulative figures help you to categorize the origins of RF emission you are exposed to (phone data traffic, phone calls, cellular towers and Wifi) and to consider how to limit emission from certain origins. It is worth noticing that the actual radio enviroment is the major factor in cumulative RF exposure, as the minutes spent on the phone have almost no direct correlation to cumulative RF exposure.


COMPLIANCE:

In each country regulatory limits for SAR values of mobile devices are complied with and the limits controlled by the national regulatory body. Generally, European countries follow ICNIRP standards (2.0 W/kg) and the North American countries the FCC standards (1.6 W/kg). QUANTA Monitor display shows you if the governmental limits for RF emission from the phones are exceeded.


COMING SOON!
=============

Reduce your RF exposure with our next application launch: QUANTA Guard

You will be able to reduce your RF exposure with our QUANTA Guard, application based on QUANTA Technology that is automatically reducing up to 90 % of the RF exposure when the phone is in a close proximity to the user without causing a change to the user experience.

In addition QUANTA Cloud service will be available with following features:
- Long term data on real time RF emission and RF exposure and cumulative RF exposure from your phone
- Follow up from all phones and other mobile devices subscribed under same cloud service (Family feature)

How to Download / Install

Download and install Quanta Monitor version 1.0.38 on your Android device!
Downloaded 10,000+ times, content rating: Everyone
Android package: com.cellraid.app.play, download Quanta Monitor.apk

All Application Badges

Free
downl.
Android
4.0+
Bug
buster
For everyone
Android app

App History & Updates

What's Changed
Updated info texts
Version update Quanta Monitor was updated to version 1.0.38
More downloads  Quanta Monitor reached 10 000 - 50 000 downloads

What are users saying about Quanta Monitor

G70%
by G####:

Is it normal to have dozens of peaks from 0 to 8.2 W/kg in few seconds when using LTE? My phone is S7 edge. If I turn the network mode to 3G only, everything is fine and the SAR values are below 0.5. I find it really weird.

Q70%
by Q####:

It says that my sar value, while I'm just using Wi-Fi is 0.39W/kg. This exceeds my sar value given by Sony with 0.10W/kg. I know that manufacturers are forced to make good and actual measurements by numerous laws worldwide, with actual equipment specified for reading microwave radiation and that they use calculations with the highest measured value to find your sar value. My phone is not equipped with something like that and therefore shall never be able to make real estimations or calculations. Just scam

I70%
by I####:

Best app ever.it shows how many radiation explode from mobile.i am using samsung j7and its SAR lv 0.5.while using 3G data or calling data it shows around average 1.according to fcc SAR LV upto1.6 w/kg safe.and while using 4g network data or calling it exceeds last limit of app around 7.0 which very dangerous for our brain or health.so guyz when using 4G network try to your mobile in range(not close in range tower)or avoid use of 4G network.2G also not safe .prefer 3G.my headache incresed when i used 4G

Z70%
by Z####:

I don't think that this app gives true info. Everytime the SAR is higher than 2.0 sometimes it is 5.8,6.0. My phone company says my phone SAR is 1.6. False information.

Z70%
by Z####:

My mi max showing 5.8w/kg sar value. Is it true.. Not able to believe since my phone claims to have sar of. 8 at head

Z70%
by Z####:

You repeatedly say that the app shows high SAR ratings because you calibrate the app using a distance of 10 mm while the many test at 15 mm. This is incorrect. I downloaded the FCC SAR Report for my phone, Moto G4, and it says they test at 0mm (head) and 10mm (body). The highest my phone can go with all radios active is 1.56. Your app shows spikes at 5.5. Also you state you use DASY4 software. The FCC uses DASY5. In interviews you mention how the FCC only tests downlink and not uplink. This is also incorrect as they state in each report that they test all ranges including the worst case scenarios of both uplink and downlink. Since your app can't test actual radiation, I would think it is more hype than help. (edit 12-9-12) Manufacturer offers no documentation nor proof that app is accurate on their website. States phone manufacturer would produce similar results if phone was tested at 0mm body. However phone IS tested at 0mm head (flat against cheek). Phone shows SAR at 1.23 head and 1.10 (10 mm from body). Obviously 0mm shows higher SAR than 10mm. Cellraid offers no explanation as to why their app should show extremely high SAR at 0mm body, when head at 0mm does not.

C70%
by C####:

I have a galaxy s6 an the phone is between 1-2. What does this SAR information mean exactly

Z70%
by Z####:

very useful app it shows my mobile always remains in very high limits in 3g upto 5.5 to 6 so I use 2g only .My mobile is honor 5c .How can I solve this problem .

Z70%
by Z####:

Huawei P9 lite SAR rating is extremely high according to this app. 5.5 using 4G and 4.9 using 3g. 0.39 with WiFi

T70%
by T####:

I don't really know the difference between SAR and power density. Please, give me help to understand. Thanks

N70%
by N####:

is this calculation is correct?.at thetime of calling or receiving sar value is higher than 4 .then power density is higher than maximum level

Z70%
by Z####:

My mi4i phone show power density 16736,what does it mean and what is the maximum level of tolerance.

Z70%
by Z####:

I was just checking the app after seeing an article online. Here are my concern and suggestion, - How is it possible that the exposure I get from Wi-fi is way larger than the 3G/4G signals? I thought the power of Wi-fi is less ... - Why don't you make the quanta-cloud service available for the people who can not have Quanta Guard because of Android limitations (above Android 4.4). You can have a Pro Quanta Monitor and ask for money maybe...

Z70%
by Z####:

To show radiation emits from our phone

Z70%
by Z####:

If my power density exposure is up to 100 000 & above, is it safe?

Z70%
by Z####:

It is unique application which shows radiation. Quite surprised to see radiation results.

J70%
by J####:

For some reason, this developer's other app "Quanta Guard" isn't listed here as 1 of their other apps, & is stated as not compatible with my device/OS. I wonder if this app is truly compatible with my device/OS, as the line graph only registers the spikes in activity shown on the speedometer for only a few seconds after opening the app. There are no accessible settings, & the app starts up & runs in the background every time I boot up my Samsung Galaxy Note 4 (model SM-N910V) until I manually kill it. :(

T70%
by T####:

What's its use? Dis question z tond creatora f dis app. Plz respond. It seemed gud app coz it wz recommended by drippler

X70%
by X####:

Using a Sony D6616, sar is either 0 or 7.5 (max) when using the radio (lte) is this accurate? Wouldn't surprise me this phone runs hot ♨! Thanks for making me more paranoid

X70%
by X####:

At least u r trying to be a part of solving men created destruction some how we will acknowledge of the radiation rather ignorance so a guide line if enclose is more appropriate

Y70%
by Y####:

Very good app Works great for me Although it would be nice if we would be able to see the real time SAR rating in the status bar.

D70%
by D####:

nice app आप भी डौनलोड़ करिये

X70%
by X####:

So is Power density bad for you? My sar levels are .36 but my power density is going to like 200,000

X70%
by X####:

Do you have an eta when guard will be available with n5 marshmallow?

Q70%
by Q####:

I have a galaxy s6 an the phone is between 1-2. What does this SAR information mean exactly

X70%
by X####:

I don't see what this has to do with fitness. Health, yes. So my phone (Note 4) has the highest number on the scale for SAR whenever data is being tramsmitted to or from my phone via LTE. I appreciate the intentions of making people more aware of the radiation. We all need to be more concerned with it for sure. But the app has told me my phone emits high levels of SAR almost all the time, so now that can just be expected and I don't need the app anymore. Why do I need to log this data?

Z70%
by Z####:

Love this app. Its so help me

X70%
by X####:

No speedometer or line graph reading are shown during call. Only WiFi reading is shown.

X70%
by X####:

Use thats app too

T70%
by T####:

I am unable to understand this app. This is going out of my mind.

Q70%
by Q####:

ओरफुद उगवजी

W70%
by W####:

How do we know this is accurate? My cumulative was up to 10,000 in 20min. or so. How about an explanation on what safe levels are??

X70%
by X####:

Tried the SAR graphing. Showed zero when not using phone, zero when in a call. Doesn't do anything.

X70%
by X####:

I am unable to find Quanta Guard. Why so. Hi Team as per your reply I tried to install Quanta Guard but it was not there in Google Play Store.

X70%
by X####:

Highly recommended in 4G device space. Very good visualisation of SAR exposures.

A70%
by A####:

If its working properly than danger lavel is 1 million times more than safety level.

W70%
by W####:

Promising premise. Look forward to the next app that let's us control / twice SAR exposure

X70%
by X####:

-60 sar means?

X70%
by X####:

Its excellent

K70%
by K####:

Helpful app


Share The Word!


Rating Distribution

RATING
4.15
594 users

5

4

3

2

1