Easy DIY Princess Crown Tutorials

We want to be pprincess for Halloween and looked high and low for a tutorial but wasn't able to find one, so we decided to make one myself and share it with you all.

Step 1: Materials

We got all the materials at Michael's, and you can probably find them at any local craft shop. The crystals are the hardest thing to find.
You will need: A glue gun, A plastic tiara, Silver rhinestones, 3 large teardrop crystals, Pliers, Gold spray paint, Floral wire, Lavender pearls, Fishing line, A needle
For the fancier crown we'll show you you'll also need large pink, teal, and white pearls.

- Then, hold the crystal up to the tiara to see where you should cut the tiara. In the second photo you can see the empty space where I cut the tiara.

- You'll have a piece of the tiara left. Use that to guide how you cut the other side of the tiara to ensure that it's even. Take off as much of the top of the tiara as you'd like. The more you take off, the lower the center stone will sit. The last photo shows a high set one that I made previously and improved upon, which is why there are rhinestones on it already.

Step 3: Crystal Prep

Take a piece of wire about the length of the perimeter of the crystal and thread 37 beads onto it. Remember that your count will be different if you don't use the exact materials we did so play with it a little.

Step 4: Spray Paint

Remove the painters tape or reattach the rhinestones to the tiara. They really pop against the gold.

Step 5: Assembly

You'll need about  1.5 feet of fishing line per crystal. Thread the fishing line through the crystal and tie it to the wire frame on the tiara.You'll want one short end and the majority of the wire on the other end, as shown in the second photo.

Attach a needle to the long end of the fishing line and loop it around through the beaded wire and the wire frame. You want to use a loop stitch that will go in between the space of every bead.

Step 6: Optional Embellishments

String five white pearls onto fishing wire and tie it securely. Thread a teal pearl onto another piece of fishing wire and make a single loose knot, like the beginning of tying shoes.

Step 7: Bling It Out

Glue the rhinestones all over the tiara. There were some empty spaces we weren't fond of, so we filled them with the embellishments and some other pearls. You can get the pearls in many colors and sizes.

Want to know more ?
Download this application now and get what you want here. worth to try and you will like it.
simply share through any social media platforms. thank you for downloading. please enjoy and give us any feedback.