About 监控摄像头
只要您有两台安卓设备,就能组件一套监控系统。
本软件需要处于同一局域网的两台安卓设备互相配合,一台做摄像头,另一台做监视器。
若您有路由器,只需将两台设备都连上您的路由器。若您没有路由器,需在您打算做摄像头的设备上点击“本机做摄像头”里的“开热点”,输入您想好的热点名称和密码,再将做监视器的设备连上刚开的这个热点。
当两台设备处于同一局域网之后,做监视器的设备点击“本机做监视器”后,会在左上角出现这台设备的IP地址。
做摄像头的设备在“监视器IP地址”框中输入你刚才看到监视器IP地址,点击“连接监视器”,就成功连上了。
如果您感觉画质不好或者画面卡顿,可以通过拖动下面两根拖动杆来调整。
若您想拍照保存,只需点击监视器的“拍照”按钮,摄像头就会拍一张摄像头支持的最大分辨率的照片并发送过来,保存在监视器手机的Pictures/ServiceCamera文件夹中。 As long as you have two Android devices, components of a monitoring system will be able to.
The software needs to be in the same LAN two Android devices with each other and do a camera, do another monitor.
If you have a router, just the two devices are connected to your router. If you do not have a router, you need to click on the camera equipment intend to do, "the machine to do the camera" in the "open hot spots", enter your name and password like a good hot, then do not even monitor the device on just getting the This hotspot.
When the two devices in the same LAN, do monitor equipment click on "make this machine monitor" post, IP address, this device will appear in the upper left corner.
Camera equipment do enter "Monitor IP address" box, you just see the monitor IP address, click on the "connect a monitor," successfully connected on.
If you feel bad or picture quality Caton, you can drag the following two drag lever to adjust.
If you want to save pictures, just click on the monitor "camera" button, the camera will shoot a camera supports a maximum resolution photos and send over, stored in the monitor cell phone Pictures / ServiceCamera folder.