旅行遠端自拍小幫手（遙控拍照）

特色：
不需要任何設定，全自動連線。
　
介紹：
如果不想拍團體照卻少了一個人，
如果你跟我一樣內羞害向不好意思求人，
如果不滿意別人幫你取的景，
如果你喜歡探險，常常到無人之地。
　
那這個App就是你最佳拍照幫手。
　
使用步驟：
1. 啟動要架在遠端拍照的Android裝置，執行App後進入「拍照模式」。
2. 將「拍照模式」裝置取好你相拍攝的景色。
3. 啟動要遙控拍照的Android裝置，執行App後進入「遙控模式」。
4. 耐心等待約５秒鐘連線，連線後會看到裝置出現遠端畫面。
5. 看著畫面，擺好姿勢。
6. 拍照！
　
　
功能：
1. 支援遠端預覽拍照畫面。
2. 支援遠端控制拍照。
3. 支援遠端對焦。
4. 支援遠端控制閃光燈模式。
　
安裝需求：
1. Android 4.0以上。
2. 裝置需有相機功能。
3. 手機或平板。
　
備註：
1. 斷線後需回到主畫面重新選擇模式。
2. 某些裝置第一次配對時會斷線，請回到主畫面重新選擇模式即可。
3. 連線時間視情況，約需3~6秒。
4. 此App是透過藍芽來連線。
5. 遙控的距離，會根據裝置的能力有所不同，一般在無障礙物下約10公尺左右。
6. 拍下的照片會存放在相機模式那台裝置的/DCIM/RemoteShot目錄下。
　
　
這需要另一隻Android手機來當遙控器。
　
現在，可以去將你封存已久的舊Android手機找出來了。


改版紀錄：
1.01.03 - [2017-01-11]
----------------------
1. 加上版本號碼的顯示。
2. 提升裝置建立連線時的穩定度。
3. 修正在連續拍照時造成app閃退問題。

1.01.02 - [2016-10-04]
----------------------
1. 修正Android 6.0手機照片解析度非最佳解析度問題。。
2. 修改App顯示名稱為「遠端自拍小幫手」。

1.01.01 - [2016-10-02]
----------------------
1. 修正Android 6.0手機無法儲存照片問題。
2. 移除在遙控模式變更藍芽裝置名字。

1.01.00 - [2016-10-01]
----------------------
1. 支援Android 6.0
2. 提升連線穩定度。
3. 增加支援閃光燈模式控制。
4. 增加遠端對焦控制。
5. 修正斷線後無法再重新連線問題。

1.00.01 - [2016-08-12]
----------------------
1. 加入了自動對焦。
2. 修正了偶爾在進入「遙控模式」時App閃退的問題。

1.00.00 - [2016-08-10]
----------------------
初始版本。 Features:
Does not require any set, automatic connections.

Introduction:
If you do not want to shoot a group photo, but less of a person,
If you're like me embarrassed to ask for help to the victims within a shame,
If you are not satisfied with others to help you take the view,
If you like adventure, often to no man's land.

Then this App is your best pictures helper.

Steps for usage:
   1. Start at the distal end Android device camera to frame, after performing App enter "camera mode."
   2. The "photographing mode" means to take a good shot with your views.
   3. Start your Android device to remote control the camera, after performing App into the "remote control mode."
   4. wait about 5 seconds to connect, you'll see after the distal end of the connected device screen appears.
   5. looked at the picture, pose.
   6. Camera!


Features:
   1. Supporting the distal end of the camera preview screen.
   2. Support Remote Control photographed.
   3. support Remote focus.
   4. Support Remote Control flash mode.

Installation Requirements:
   1. Android 4.0 and above.
   2. The apparatus of the need for a camera function.
   3. The phone or tablet.

Remarks:
   1. The need to return to the main screen after the break to re-select mode.
   2. Some devices will be paired for the first time when broken, please return to the main screen to reselect the mode.
   3. Subject to the connection time, about 3-6 seconds.
   4. This App is to connect via Bluetooth.
   5. Remote distance will vary according to the capacity of the device, usually in about 10 meters without obstacles.
   6. The photos taken will be stored in the camera mode that sets the device / DCIM / RemoteShot directory.


This requires another Android phone to when the remote controller.

Now, you can go to the archive long old Android phone to find out.


Revision history:
1.01.03 - [2017-01-11]
----------------------
1. Plus version number display.
2. The establishment of a stable lifting device when connecting.
3. Fix app during continuous shooting caused flash back problems.

1.01.02 - [2016-10-04]
----------------------
1. Fixed Android 6.0 cell phone photos resolution non-optimal resolution of the problem. .
2. Modify the App Display Name is "Self-distal small helper."

1.01.01 - [2016-10-02]
----------------------
1. Fixed Android 6.0 phones can not store photos problems.
2. Remove the Bluetooth device name changes in remote mode.

1.01.00 - [2016-10-01]
----------------------
1. Support Android 6.0
2. To enhance the stability of the connection.
3. Increase support flash mode control.
4. Increase the distal end of the focus control.
5. After the break can not be amended and re-connection issues.

1.00.01 - [2016-08-12]
----------------------
1. Add the autofocus.
2. Fixed occasionally enter "remote mode" when App flash back problems.

1.00.00 - [2016-08-10]
----------------------
initial version.