Modification Motor Drag

DRAG BIKE is a championship riding a motorcycle at high speed which is performed in an asphalt-covered racing track consists of two parallel straight lines of equal length.

PATH TO DRAG BIKE
Tracks consists of two lines at the racetrack from the Starting Line to the Finish Line along the path length of 201 meters and 201 meters long braking.
The width of the racetrack at least 4 meters per lane.
Tracks must be free from obstructions / obstacles, the track conditions were flat and flat asphalt.
Racetrack and braking should be the dividing lines that do not obstruct the view to the tire or a sack with a minimum height of 60 cm.

Racetrack and braking bordering the audience shall be separated by fence sealed, a minimum of 1.5 meters from the edge of the passage.
Behind the starting line must be provided for the preparation area, line up and start with a minimum length of 10 meters.

modification motor drag, modification motor sport, modification motor matic