Install Rakit Komputer

1. Memasang Processor ke Motherboard

Alangkah baiknya sebelum motherboard dipasang ke casing, terlebih dahulu memasang processor karena akan lebih mudah cara memasangnya. Cara memasang processor ke motherboard yaitu :

Kita tentukan dulu posisi pin 1 pada prosessor dan socket prosessor di motherboard, umumnya terletak di pojok yang ditandai dengan tanda titik atau lekukan.
Angkat tuas pengunci socket ke atas supaya terbuka
Sesuaikan posisi kaki processor dengan lubang socket, kalau sudah lalu tekan processor ke dalam socket sampai rapat.
Kunci kembali dengan tuas pengunci.



2. Memasang Motherboard
Untuk memasang Motherboard pada casing yaitu letakkan motherboard pada tray casing dan sesuaikan lubang antara casing dan lubang motherboard, lalu kunci dengan sekrup.


3. Memasang Heatsink
Setelah processor terpasang, lalu pasang heatsink supaya processor tidak panas. Heatsink ini diletakkan diatas processor dan diberi penahan supaya tidak lepas. Sebelumnya lapisi heatsink dengan Gel penghantar panas. Apabila heatsink anda ada kipasnya/fan maka konektor power pada kipas/fan hubungkan ke motherboard.


4. Memasang RAM / Memori
Cara memasang Ram / modul memori yaitu : Buka dulu tuas penguncinya, lalu sesuaikan posisi lekukan pada modul memori dengan lekukan pada slot. Kalau sudah pas lalu tekan dan pasang kembali tuas pengunci RAM / memori.


5. Memasang Power Supply
Biasanya kalau kita membeli casing pasti power supply sudah terpasang. Nah apabila power supply belum terpasang caranya memaangnya yaitu :

Letakkan power supply pada tempatnya yang ada dibelakang casing, lalu kunci dengan sekrup.
Pasang konektor power dari power supply ke motherboard berikut kabel-kabelnya.



6. Memasang Kabel Motherboard dan Casing

Pasang kabel konektor IDE primary dan secondary pada motherboard.
Untuk motherboard non ATX, pasang kabel port serial dan pararel pada konektor di motherboard.
Pada bagian belakang casing terdapat lubang untuk memasang port tambahan jenis non slot. Buka sekerup pengunci pelat tertutup lubang port lalumasukkan port konektor yang ingin dipasang dan pasang sekerup kembali.
Hubungkan kabel konektor mouse dan keyboard pada motherboard.
Hubungan kabel konektor yang lainnya seperti LED, speaker internal dan port yang tersedia di casing komputer.


Download Aplikasinya Sekarang Juga 1. Installing the processor to the motherboard

It would be nice before the motherboard is installed into the chassis, first install the processor because it will be much easier way to install them. How to install the processor to the motherboard, namely:

    We first determine the position of pin 1 on the processor and processor socket on the motherboard, usually located on the corner marked with dots or grooves.
    Lift up the locking lever so that the open socket
    Adjust the position of the processor with the socket holes, when it and press the processor into the socket until the meeting.
    Lock back with the locking lever.



2. Installing the Motherboard
To install the motherboard in the chassis that is placed on the motherboard tray and adjust hole casing between the casing and the hole motherboard, and then lock the screws.


3. Install Heatsink
Once the processor is installed, and then install the heatsink so that the processor does not heat. This heatsink placed on the processor and by retaining that can not be separated. Previous seal heatsink with a heat conductive gel. If you have any fan heatsink / fan the power connector on the fan / fan connect to the motherboard.


4. Installing RAM / Memory
How to install the Ram / memory modules, namely: first open the latch lever, then adjust the position of the indentation on the memory module with the notches in the slot. If it fits and press the locking lever and replace the RAM / memory.


5. Installing the Power Supply
Usually when we buy casings sure the power supply is mounted. Well if the power supply is not installed do memaangnya namely:

    Place the power supply in place is behind casing, and then lock the screws.
    Attach the power connector from the power supply to the motherboard below the cables.



6. Installing the Motherboard Cable and Casing

    Attach cables primary and secondary IDE connector on the motherboard.
    For non-ATX motherboard, plug the serial and parallel port cable to the connector on the motherboard.
    On the back of the casing there is a hole to install additional types of non-slot port. Open the lock plate screw holes covered lalumasukkan port connector ports you want to install and replace the screws back.
    Connect the mouse and keyboard cable connector on the motherboard.
    Relations connector cables such as LEDs, internal speakers and ports available on the computer case.


Download Application NOW