Drag Motor Modifications

Drag motor modifications

Some drag motor models can be found here

DRAG BIKE is a high-speed motorcycle riding championship conducted within an enclosed pavement runway consisting of two straight lines parallel to the same length.

TRICKS FOR DRAG BIKE
The track consists of two lanes with a runway from the Start Line to the Finish Line along 201 meters and a length of 201 meters of braking.
Runway width of at least 4 meters per path.
Trajectory must be free from obstacles / obstacles, with flat and flat pavement conditions.
The runway and braking should be provided with a path separator that does not obstruct the view with a tire or sack with a minimum height of 60 cm.
The track and braking course adjacent to the spectator shall be separated by a tightly enclosed guardrail, at least 1.5 meters from the edge of the track lane.
Behind the starting line should be provided area for preparation, line up and start with a minimum length of 10 meters.

The main classes contested for the Drag Bike National Championships are:
Mixed Class 250 cc 2 Step Tune Up
Duck Class 125 cc 4 Step Tune Up
Sport Class 150 cc 2 Step Tune Up
Duck Class 125 cc 2 Step Tune Up.

LIST OF CYLINDER CAPACITY
250 cc mixed class 2 Step Tune Up: 80 cc s / d 250 cc
Duck Class 125 cc 4 Step Tune Up: 80 cc s / d 130 cc
Sport Class 150 cc 2 Step Tune Up: 135 cc s / d 155 cc
Duck Class 125 cc 2 Step Tune Up: 80 cc s / d 125 cc

Drag motor modifications
Motor drag