RS-MS1A
Free App
Advertisements
About RS-MS1A
The RS-MS1A is an application that allows your Android device to remotely use the D-STAR and DV mode functions of some D-STAR transceivers
Functional overview of the application
DR functions
You can use some transceiver’s DR functions.
Share pictures
Send and receive voice and pictures.
Text messaging
Send and receive text messages.
Map
See the location of repeater sites or other stations on a map using received position data, or your transceiver’s repeater list.
Automatically set the transceiver’s “FROM” and “TO” fields by tapping a repeater site or a station on the map.
Offline Map
Use your own maps without needing an internet connection.
Receive History
In the DV mode, read and edit the received station’s information.
Download additional information from an Internet database, such as QRZ.com or APRS.fi.
Call Sign list
Edit call signs and names used in the DR function. Also, you can add a call sign and a name in the Call Sign list.
Repeater list
See the detailed data entered in the Repeater list.
Transceiver settings
Change some of the transceiver’s function settings.
Application settings
Select application software settings.
Import
Import a Repeater list and a Call Sign list.
Export
Export the Repeater list, the Call Sign list, and the Receive History.
Device requirements
The RS-MS1A operating requirements are as follows:
1. Android 4.0 or later
The RS-MS1A has been tested with the following Android devices available in Japan.
- Samsung Galaxy S3 Progre (au SCL21: Android 4.0.4 / 4.1.2)
- Samsung Galaxy S3 (NTT docomo SC-03E: Android 4.1.1)
- Samsung Galaxy S3α (NTT docomo SC-03E: Android 4.1.1)
- Samsung Galaxy S4 (NTT docomo SC-04E: Android 4.2.2 / 4.3 / 4.4.2/5.0.1)
- Samsung Galaxy Note (NTT docomo SC-05D: Android 4.1.2)
- Samsung Galaxy Note3 (NTT docomo SC-01F / au SCL22: Android 4.3 / 4.4.2/5.0)
- Samsung Galaxy S7 edge (au SCV33 : Android 6.0)
- Google Nexus 7 (2012) (Nexus7-16G: Android 4.2.2 / 4.4.2 / 4.4.3)
- Google Nexus 7 (2013) (Nexus7-16G: Android 4.3 / 4.4.2 / 4.4.3/6.0.1)
2. Touch screen
3. Bluetooth function and/or USB host function
Compatible transceivers
- ID-5100A/E
- ID-4100A/E
- ID-51A/E (PLUS model / PLUS2 model)
- ID-51A/E*
- ID-31A/E*
- IC-7100*
*Not all functions are usable.
Preparation
To use the RS-MS1A with a supported transceiver, you need an internal Bluetooth unit or the OPC-2350LU data cable. See your transceiver’s instruction manual for details.
Note:
- The RS-MS1A may not work with all Android devices, even if it is one of the tested devices. This is because an application program on your device may conflict with the RS-MS1A.
- You may need to install additional file managing and image processing software.
- Your Android device must be USB host function compatible to communicate with your transceiver through the OPC-2350LU cable. Even if your device is USB host function compatible, the RS-MS1A may not function properly.
- You may need to connect to the Internet through a Wireless LAN, a 3G network or an LTE network for some functions.
- The RS-MS1A supports only portrait orientation. It does not support Auto Rotate.
- Remove the data cable when the Android device is not used to reduce the devices power consumption
- The RS-MS1A program may lock up when transmitting some high-quality or large size image files, or continuously operated for a long time. In that case, restart the program.
- Depending on the Android device, the power supplied to the USB terminal may be stopped while in the display sleep mode or power saving mode. In that case, remove the “Screen timeout” check mark on the Application Setting screen of the RS-MS1A.
- When you transmit an image file with the baud rate set at 4800bps, some of that data may be lost. In that case, set the baud rate to over 9600bps.
Functional overview of the application
DR functions
You can use some transceiver’s DR functions.
Share pictures
Send and receive voice and pictures.
Text messaging
Send and receive text messages.
Map
See the location of repeater sites or other stations on a map using received position data, or your transceiver’s repeater list.
Automatically set the transceiver’s “FROM” and “TO” fields by tapping a repeater site or a station on the map.
Offline Map
Use your own maps without needing an internet connection.
Receive History
In the DV mode, read and edit the received station’s information.
Download additional information from an Internet database, such as QRZ.com or APRS.fi.
Call Sign list
Edit call signs and names used in the DR function. Also, you can add a call sign and a name in the Call Sign list.
Repeater list
See the detailed data entered in the Repeater list.
Transceiver settings
Change some of the transceiver’s function settings.
Application settings
Select application software settings.
Import
Import a Repeater list and a Call Sign list.
Export
Export the Repeater list, the Call Sign list, and the Receive History.
Device requirements
The RS-MS1A operating requirements are as follows:
1. Android 4.0 or later
The RS-MS1A has been tested with the following Android devices available in Japan.
- Samsung Galaxy S3 Progre (au SCL21: Android 4.0.4 / 4.1.2)
- Samsung Galaxy S3 (NTT docomo SC-03E: Android 4.1.1)
- Samsung Galaxy S3α (NTT docomo SC-03E: Android 4.1.1)
- Samsung Galaxy S4 (NTT docomo SC-04E: Android 4.2.2 / 4.3 / 4.4.2/5.0.1)
- Samsung Galaxy Note (NTT docomo SC-05D: Android 4.1.2)
- Samsung Galaxy Note3 (NTT docomo SC-01F / au SCL22: Android 4.3 / 4.4.2/5.0)
- Samsung Galaxy S7 edge (au SCV33 : Android 6.0)
- Google Nexus 7 (2012) (Nexus7-16G: Android 4.2.2 / 4.4.2 / 4.4.3)
- Google Nexus 7 (2013) (Nexus7-16G: Android 4.3 / 4.4.2 / 4.4.3/6.0.1)
2. Touch screen
3. Bluetooth function and/or USB host function
Compatible transceivers
- ID-5100A/E
- ID-4100A/E
- ID-51A/E (PLUS model / PLUS2 model)
- ID-51A/E*
- ID-31A/E*
- IC-7100*
*Not all functions are usable.
Preparation
To use the RS-MS1A with a supported transceiver, you need an internal Bluetooth unit or the OPC-2350LU data cable. See your transceiver’s instruction manual for details.
Note:
- The RS-MS1A may not work with all Android devices, even if it is one of the tested devices. This is because an application program on your device may conflict with the RS-MS1A.
- You may need to install additional file managing and image processing software.
- Your Android device must be USB host function compatible to communicate with your transceiver through the OPC-2350LU cable. Even if your device is USB host function compatible, the RS-MS1A may not function properly.
- You may need to connect to the Internet through a Wireless LAN, a 3G network or an LTE network for some functions.
- The RS-MS1A supports only portrait orientation. It does not support Auto Rotate.
- Remove the data cable when the Android device is not used to reduce the devices power consumption
- The RS-MS1A program may lock up when transmitting some high-quality or large size image files, or continuously operated for a long time. In that case, restart the program.
- Depending on the Android device, the power supplied to the USB terminal may be stopped while in the display sleep mode or power saving mode. In that case, remove the “Screen timeout” check mark on the Application Setting screen of the RS-MS1A.
- When you transmit an image file with the baud rate set at 4800bps, some of that data may be lost. In that case, set the baud rate to over 9600bps.
All Application Badges
Free
downl.
downl.
Android
4.0+
4.0+
Bug
buster
buster
Android app
App History & Updates
What's Changed
・Improved stability of the picture sharing function on Android 7.x.
・Fixed other minor bugs.
・Improved stability of the picture sharing function on Android 7.x.
・Fixed other minor bugs.
Version update RS-MS1A was updated to version 1.2.4
Version update RS-MS1A was updated to version 1.2.2
More downloads RS-MS1A reached 10 000 - 50 000 downloads
Version update RS-MS1A was updated to version 1.2.1
What are users saying about RS-MS1A
P
by P####:
by P####:
There's a bit of a learning curve. If I'd payed attention up front it would have been easier. Be sure to watch icom vids on youtube.
I
by I####:
by I####:
Very disappointed. Does not work on either my Galaxy Note 5 nor my Android tablet.
T
by T####:
by T####:
Icom 51a/e with note4 and tab s2 and nexus 2013
A
by A####:
by A####:
How can I get this to work in landscape mode?
T
by T####:
by T####:
Not working on a Galaxy 5 and Galaxy Tab3
T
by T####:
by T####:
Nice try, but no cigar!!
T
by T####:
by T####:
Works fine with a Galaxy S7, once you set the Galaxy settings correctly.
O
by O####:
by O####:
Installed the latest version on my brand new Samsung S6. Pairs with my new 5100 no problem but that is as far as it will go. Numerous attempts to get technical support for this problem have failed and basically I was told that it does not appear to be compatible with the S6 'at this time'.
O
by O####:
by O####:
Keep improving this app! Previous minor issue cured with new version.
Z
by Z####:
by Z####:
It would be a neat feature if you could add a PPT/audio option in the application itself. For example, the phone would act like the microphone and the speaker for the radio. Other than that, keep up the good work.
F
by F####:
by F####:
Connected to IC-7100 using cable supplied with rig. The app does nothing. Waste of time.
N
by N####:
by N####:
Works well on a Galaxy S4 and Dell Vue tablet - but you do need to turn on C-IV communications on your ID51Plus or similar device.
T
by T####:
by T####:
This app does not work on either my Samsung S6 Edge or my older NOTE 8.0. Do NOT waste your money on the Icon OPC-2350LU or this App if you own either, as they will NOT work. The best you can hope for is an error message, "Failed to communicate with the transceiver. Check the transceiver settings or application settings.". To the extent I am able, I have checked both the transceiver and applications settings and made changes, yet nothing. Very disappointed.
A
by A####:
by A####:
Read Dave's Advice! I just did and it worked on my cheap Samsung tablet. Dave said: This application works very well with both my One+1 and my Nexus7 tablet. There were a couple of problems when I tried to get the cable to connect but I found that by default, the ID51A and ID51APlus radios come up with the CV-I settings turned off. You will need to go into the menu and turn on the CV-I and set the echo back to 0. These instructions really needed to be included in the instructions for the cable set that goes with this APP, but were not. I really like the map selection of nearby stations, very intuitive. THANK YOU, DAVE, FOR HELPING ME OUT!!!!
T
by T####:
by T####:
Nexus 5x fully supports USB host mode. App simply states, "Failed to communicate with the transceiver. Check the transceiver or application settings" super useful, thanks icom!!!
H
by H####:
by H####:
doc
N
by N####:
by N####:
This app does not work on either my Samsung S6 Edge or my older NOTE 8.0. Do NOT waste your money on the Icon OPC-2350LU or this App if you own either, as they will NOT work. The best you can hope for is an error message, "Failed to communicate with the transceiver. Check the transceiver settings or application settings.". To the extent I am able, I have checked both the transceiver and applications settings and made changes, yet nothing. Very disappointed.
X
by X####:
by X####:
Does not work on my samsung galaxy note 10.1 or my one plus android phone. tried connecting to USB.. just comes back with USB not connected. My radio is an ICOM 7100. Need some work done and a better list of DV radios
R
by R####:
by R####:
This application works very well with both my One+1 and my Nexus7 tablet. There were a couple of problems when I tried to get the cable to connect but I found that by default, the ID51A and ID51APlus radios come up with the CV-I settings turned off. You will need to go into the menu and turn on the CV-I and set the echo back to 0. These instructions really needed to be included in the instructions for the cable set that goes with this APP, but were not. I really like the map selection of nearby stations, very intuitive.
S
by S####:
by S####:
Just picked up a Lenovo Tab 2 A7-20 at Best buy for 69 bucks and it works perfectly with my ID-51a 50th Anniversary transceiver perfectly. I just made sure to configure the radio CI-V mode properly per the manual. Everything works great. Plus this is a great tablet for the price.
N
by N####:
by N####:
If you have a Galaxy Tab 4 and a Samsung S6 you MUST get into your radio settings and turn ON the CV-I setting. After that google "RS-MS1A for Samsung" and download the app from the website you find it on. It all works great after those steps. You may be able to just change your radio setting without DL the app from a website. Have fun and good luck!
N
by N####:
by N####:
Tried using USB not working hope you guys make new update to make this work in ic-7100 or sell a Bluetooth for $50 or less
Y
by Y####:
by Y####:
Does not list non ICOM d-star repeaters (eg GB7BE). Fail... Uninstall
A
by A####:
by A####:
51a+ and Samsung Note 5, cannot detect transceiver. I can't believe I paid $70 for an official icom cable kit and it doesn't work at all.
D
by D####:
by D####:
Get the radio settings right and this has worked on all of my Android devices. All 5 just needed the settings to be right. Good job. Good app.
T
by T####:
by T####:
I'd like to see some programming capabilities added to this app.
O
by O####:
by O####:
Does not work with my phones, or my tablet.. Installs on tablet but only says USB not connected. Phones it will not install at all. A friend also had trouble with a galaxy tab 4.. This should be updated more frequently. You would think for D-star as popular as it is, that they were invest more time and effort into this app. PLEASE DO NOT BUY THE RADIO/$70 CABLE until you try it with another persons cable and radio. Too much to waste if it doesnt work on your device.
N
by N####:
by N####:
Icom needs to do some work on this, it is passable as a control app, but certain things are clunky. For instance, in the Map display, the drop down menu has choices like "RX position OFF". Does that mean the RX position display IS off, or is it on now, and I should select that item to turn it off? How about using some kind of standard user interface like a check mark, or highlight, to indicate the current state of the menu items? For others that are having problems connecting their ID-51A Plus radios to smartphones using the OPC-2350LU cable, especially Samsung devices, try these RADIO settings- they agree with the default RS-MS1A application settings, and work on my Samsung Note 5: Radio MENU>Function>CI-V: CI-V Data jack: ON (Echo Back OFF); CI-V address: 86; CI-V Baud Rate: 9600bps; CI-V Transceive: ON ; Radio MENU>GPS
V
by V####:
by V####:
It would be a neat feature if you could add a PPT/audio option in the application itself. For example, the phone would act like the microphone and the speaker for the radio. Other than that, keep up the good work.
M
by M####:
by M####:
Does what it us supposed to do. It would have been good of the audio was also played on the Android device. Note that this app works fine with my stock Samsung Galaxy Note 4 running lollipop.
I
by I####:
by I####:
Does not work with my Samsung Galaxy Tab running 4.4.2 Error says: USB is not supported on this device. Don't buy the cable until you test the app for compatibility.
S
by S####:
by S####:
Does not work with my ID 51 a Plus and my samsung s5
M
by M####:
by M####:
Would like to see a DR scan feature added.
G
by G####:
by G####:
Great app
S
by S####:
by S####:
Installed the latest version on my brand new Samsung S6. Pairs with my new 5100 no problem but that is as far as it will go. Numerous attempts to get technical support for this problem have failed and basically I was told that it does not appear to be compatible with the S6 'at this time'.
S
by S####:
by S####:
Won't work on Samsung Tab 3 says problem with USB. Have also tried on a Nexus that is on the approved (tested) list this one launches the programming but will not talk to the radio. Very little help from Icom!
P
by P####:
by P####:
Works with 2218LU on my ID5100e connected to Samsung Galaxy Note 10.1 tablet & Samsung S3 Mini phone, but failed to work on ID51e with 2350LU cable connected to Samsung S3 Mini phone which was the sole purpose of buying the extra 2350LU cable, so either £54 wasted or £500 for a new phone :-( not completely happy...
T
by T####:
by T####:
Keep improving this app! Previous minor issue cured with new version.
N
by N####:
by N####:
Keep improving this app! Previous minor issue cured with new version.
by T####:
Used this with a Galaxy S7 and it worked straight out of the box. I love this app and see how useful it will be for EmComm. Just one request! It would be ver useful to be able to send files other than pictures such as spreadsheets, text documents, and other file types. If there is a way I am missing please feel free to contact me.