BlueTerm 2
Free App
Advertisements
About BlueTerm 2
Bluetooth terminal emulator for communicating with any serial device using a bluetooth serial adapter. The RFCOMM/SPP protocol emulates serial communications over bluetooth.
You need a bluetooth serial adapter like the HC-05 or HC-06
You can use this to control your Arduino or Raspberry Pi, if you have connected a bluetooth serial adapter to its serial port.
This is an updated version to https://play.google.com/store/apps/details?id=es.pymasde.blueterm
In the original version it was impossible to use commands like 'ctrl-c' on newer devices with just a few buttons.
Both volume keys are set to be the special key for those commands now. Simply press one of them together with e.g. 'c' on your android keyboard and the output will be 'ctrl-c'.
This is an opensource application. You can get more info and the source code from:
http://pymasde.es/blueterm/
Thanks everybody for the feedback.
You need a bluetooth serial adapter like the HC-05 or HC-06
You can use this to control your Arduino or Raspberry Pi, if you have connected a bluetooth serial adapter to its serial port.
This is an updated version to https://play.google.com/store/apps/details?id=es.pymasde.blueterm
In the original version it was impossible to use commands like 'ctrl-c' on newer devices with just a few buttons.
Both volume keys are set to be the special key for those commands now. Simply press one of them together with e.g. 'c' on your android keyboard and the output will be 'ctrl-c'.
This is an opensource application. You can get more info and the source code from:
http://pymasde.es/blueterm/
Thanks everybody for the feedback.
All Application Badges
Free
downl.
downl.
Android
2.1+
2.1+
Android app
App History & Updates
What's Changed
bugfix
bugfix
More downloads BlueTerm 2 reached 10 000 - 50 000 downloads
What are users saying about BlueTerm 2
Y
by Y####:
by Y####:
Nothing but a blank blue screen which says "not connected". I sort of guessed that.
J
by J####:
by J####:
Doesn't work.. Only crashes
Y
by Y####:
by Y####:
works.
V
by V####:
by V####:
Wowiiiieeeee
T
by T####:
by T####:
Useful for communicating with serial bluetooth module connected to a microcontroller. Problems: Pressing backspace key on Android keyboard does not seem to work correctly, and it would be really nice to have separate colors for outgoing and incoming text.
V
by V####:
by V####:
Not sure it's this apps fault, but it doesn't work with SwiftKey, I had to change keyboard to default or I can't type. Happens on the original Blueterm too.
W
by W####:
by W####:
Does nothing
T
by T####:
by T####:
I like
T
by T####:
by T####:
** Typo bug **: Outgoing End of Line -> Replace by CRLF (0x0D0A). You send CR (0D) first and LF (0A) afterwards, so you send low byte 0D first and then high byte 0A, in a result you send a word of value 0x0A0D (not 0x0D0A).
by Y####:
Delighted with this. Fits my needs really well. First it shows the data coming from the HC-06 (small text so lots on the screen) and I can take a log for any period for review/analysis later. Mike