AccelerometerSensor_MIT_AI

AccelerometerSensor_MIT_AI Free App

Rated 4.50/5 (4) —  Free Android application by vivo

Advertisements

About AccelerometerSensor_MIT_AI

◆アプリ名: AccelerometerSensor_MIT_AI (十二星座シリーズ / 開発コード名: Gemini)

加速度センサーで取得できる値を画面に出力し続ける単純な無料アプリです。
本アプリは内蔵メモリではなく、SDカードにインストールされます。
なお、本アプリは「MIT App Inventor V1.33(※1)で製造し、AppToMarketV3.2(※2)でリビルドしたノンコーディングなものです。

※1 MIT App Inventor V1.33
http://appinventor.mit.edu/

※2 AppToMarketV3.2
https://code.google.com/p/apptomarket/

※3 加速度センサーとは、物が動くときに働く加速度を測定するセンサーです。
MIT App Inventorでは、Sensor componentsの一つである「AccelerometerSensor」という部品が用意されています。


【ご提供サービス】
 ・「センサー検知間隔(msec)」、「Shaking検知間隔時間(msec)」を入力条件とし、加速度センサー(AccelerometerSensor)が取得できる以下値を画面表示します。
  なお、加速度はSI単位(m/s^2)で計測されます。
   -X軸の加速度(XAccel)
デバイスを右に傾けた(つまり左側面が上向きになった)ときに正になり、左に傾けた(右側面が上向きになった)ときに負になります。
-Y軸の加速度(YAccel)
底面が上向きだと正になり、上面が上向きだと負になります。
-Z軸の加速度(ZAccel)
表向きだと正になり、裏向きだと負になります。
デバイスの底を平らな面に置いたままであれば、Z軸の加速度は重力加速度である約9.8になります。
-Shaking検知間隔時間(MinimumInterval)
入力条件で指定した値がそのまま表示されます。

    また、上記の他に入力条件として指定した以下値も画面表示します。
-センサー検知間隔(msec)
入力条件で指定した値がそのまま表示されます。
-Shaking()検知結果
Shaking検知後ラベルを"Shaking() method was called."と表示し、「Shaking検知間隔時間(msec)」を経たら"Initialized"を表示します。

【十二星座シリーズについて】
 ・本シリーズは、私がMIT App Inventorの APIを理解したいと考え、製造したアプリ群です。
  従い、本シリーズは目的重視の為、実用的ではないかもしれません…が、どうかお許し下さい。
  ただし、アプリのロジックとして、MIT App Inventor Blocks Editorの図を私のHPに公開させて頂こうと考えております。
  ご参考になれば幸いです。

【ダウンロード後によくある質問】
 ・今のところございません。

【対応端末】
 ・AndroidOSのバージョン2.0以上搭載の端末でご利用いただけます。
 ・スマートフォン以外の機器(スマートTVなど)は、動作保証外です。 ◆ application name: AccelerometerSensor_MIT_AI (codenamed Series / twelve constellation: Gemini)

It is a simple free app to keep output value in the screen that can be retrieved by the accelerometer.
This app is not a built-in memory, SD card is installed on.
Incidentally, manufactured in (※ 1) "MIT App Inventor V1.33 this application, it is not to rebuild in a non-coding (※ 2) AppToMarketV3.2.

※ 1 MIT App Inventor V1.33
http://appinventor.mit.edu/

※ 2 AppToMarketV3.2
https://code.google.com/p/apptomarket/

※ The acceleration sensor 3, it is a sensor that measures the acceleration acting on the object when it moves.
At MIT App Inventor, parts are available, which is one of the Sensor components called "AccelerometerSensor".


[Services Provided]
· The input conditions, and the following screen displays the value (AccelerometerSensor) can be obtained acceleration sensor "Sensor detection interval (msec)" "(msec) time interval between the detection Shaking",.
In addition, the acceleration is measured in SI units (m / s ^ 2).
-X-axis acceleration (XAccel)
I will be positive to negative (ie the left side is now facing up) when the device is tilted to the right, tilted to the left (the right side is now facing up) when.
-Y-axis acceleration (YAccel)
When exactly will it bottom upward, I will be on the up and the upper surface negative.
-Z-axis acceleration (ZAccel)
Ostensibly it is positive and, I will be negative it face down.
If put on a flat surface while the bottom of the device, the Z-axis acceleration is acceleration of gravity is about 9.8.
-Shaking time detection interval (MinimumInterval)
Value specified in the input conditions will be displayed as it is.

In addition, the following values ​​are also displayed on the screen that you specify as input in addition to the above conditions.
- Sensor detection interval (msec)
Value specified in the input conditions will be displayed as it is.
-Shaking detection result ()
Display "Shaking () method was called." And the label after the detection of Shaking, via the "(msec) time interval detection Shaking" to view the "Initialized".

About the series] twelve constellations
-I want to understand the API of MIT App Inventor I, this series is a suite of applications that were produced.
Therefore, for the purpose of emphasis, it may not be practical ... but this series, please forgive me.
However, we are considered as the logic of the app, let me try to publish to my HP figure MIT App Inventor Blocks Editor.
It would be greatly appreciated if you become your reference.

[FAQ] after download
· There are no so far.

[Support] terminal
· You can use a terminal equipped with version 2.0 or higher of AndroidOS.
Equipment and other smartphones (such as Smart TV), is not guaranteed.

How to Download / Install

Download and install AccelerometerSensor_MIT_AI version 1.01 on your Android device!
Downloaded 100+ times, content rating: Everyone
Android package: appinventor.ai_vivo_tokyo_jp.AccelerometerSensor_MIT_AI, download AccelerometerSensor_MIT_AI.apk

All Application Badges

Free
downl.
Android
2.0+
For everyone
Android app

App History & Updates

What's Changed
Ver1.0.1 2013/04/09 Shaking検知後ラベルを"Shaking() method was called."と表示し、「Shaking検知間隔時間(msec)」を経たら"Initialized."を表示する様変更
Ver1.0.0 2013/04/08 新規作成
More downloads  AccelerometerSensor_MIT_AI reached 100 - 500 downloads
More downloads  AccelerometerSensor_MIT_AI reached 50 - 100 downloads

Oh snap! No comments are available for AccelerometerSensor_MIT_AI at the moment. Be the first to leave one!

Share The Word!


Rating Distribution

RATING
4.55
4 users

5

4

3

2

1