AIFA BTRC-02(05) CN 智能家居控制盒

*** 请注意，此APP需搭配「AIFA智能星球家电控制盒BTRC05」使用 ***

@ 步骤一. 蓝牙配对

1. 请将蓝牙盒连接上USB电源。
2. 请使用手机在Google Play商店下载「AIFA蓝牙家电控制盒」APP，并依照屏幕出现的指示安装程序。
3. 请执行APP并开启手机蓝牙功能，点选画面底部「开始搜寻」找寻蓝牙盒「BTRC-05」来配对。如已找到蓝牙盒，请点选并输入PIN码「1234」，画面将显示「已连接」，蓝牙盒内的蓝光LED将显示恒亮，表示手机与蓝牙盒已经成功联机。如果未找到蓝牙盒，或盒内蓝光依然闪烁，表示连接失败，请退出APP再重新进入，再次执行寻找与配对。* 同一手机配对只需设定第一次，日后只要开启APP可从「已配对装置」中点选。

@ 步骤二. 家电代码设定

1. 请开启「AIFA蓝牙家电控制盒」APP，左右滑动切换至您想设定的家电画面，然后点选画面右下角的齿轮图示进入家电代码设定画面，使用以下两种方式设定代码：
*自动寻码：请点选画面右上角的「搜寻」1秒以上即可启动自动寻码。
*手动寻码：请点选「厂牌清单」选择合适的家电厂牌与代码。
2. 若代码设定正确，即可立即操控家电全部或绝大部份功能。
(各装置代码只需设定一次即可自动记忆，下次使用不需重新设定。)

@ 步骤三. 无适用代码时，请使用学习功能

1. 请将APP画面移至欲学习的设备画面 ( 以电视为例 )。
2. 请点选左上方L符号，按下「确定」后进入学习功能，L符号将转成橘色表示进入学习模式，蓝牙盒内的红色LED灯也将恒亮。
3. 请将要学习的遥控器红外线端对准蓝牙盒的红外线端，两者相距1-2公分(可放桌上)。
4.请点选APP画面上需要学习的按键，例如「电源」，蓝牙盒内的红色LED将开始闪烁，此时请按下遥控器上的「电源」键，画面将显示「学习成功」或「学习失败」。
5. 重复步骤4，以此类推，学习其他按键。
6. 学习完毕后，请点选画面左下方的返回键退出学习模式，完成整个学习过程。
7. 请测试刚刚学习好的按键是否有效，如无效请重复步骤1~6。
* 进入学习模式后如经过10秒未设定将自动退出学习模式。

@ 步骤四. 其他家电的学习：学习吊扇、电风扇、灯光等附有红外线遥控器的其他家电

1. 请将APP画面移至「学习」的画面。
2. 请点选左上方L符号，按下「确定」后进入学习功能，L符号旁边会出现灯泡图标，蓝牙盒内的红色LED灯也会恒亮。
3. 请将要学习的遥控器红外线端对准蓝牙盒的红外线端，两者相距1-3公分(可放桌上)。
4. 请点选画面中任一空白的按键，蓝牙盒内的红色LED将开始闪烁，此时请按下遥控器上任一想学习的按键，画面将显示「学习成功」或「学习失败」。
5. 学习成功时，可以按选择图示。
6 .如果学习失败，请重复1~4步骤重新学习。
7. 如果学习成功，可加上图示以便日后使用：请点选画面右下角齿轮图标，确定启动按钮样式编辑，然后再点选刚刚学习成功的按键，即可选择自己想要的按键图标。 *** Please note that this APP to be with "intelligent planet AIFA BTRC05 appliance control box" use ***

@ Step one. Bluetooth pairing

1. Connect the Bluetooth box is connected to the USB power supply.
2. Please use the phone in the Google Play store to download "AIFA Bluetooth appliance control box" APP, and follow the screen instructions to install the program.
3. Do APP and turn Bluetooth phone, tap the bottom of the screen "Start Search" to find the Bluetooth Box "BTRC-05" to the pairing. If he has found the Bluetooth box, tap and enter the PIN code "1234", the screen will display "Connected" Bluetooth box blue LED will show a constant light, said the phone with a Bluetooth box has been successfully online. If you do not find the Bluetooth box, or Blu-ray box is still flashing, indicating that the connection fails, exit and re-enter the APP, to find and execute pairing again. * Just set the same phone is paired for the first time, in the future as long as the open APP from "paired devices" on tap.

@ Step two. Appliance code setting

1. Turn on "Bluetooth AIFA appliance control box" APP, sliding around to switch to the appliance you want to set the picture, then click the gear icon bottom right corner of the screen into the appliance code setting screen, use the following two ways to set the code :
* Automatically find code: Please click on the top right corner of the screen "Search" more than 1 second to start the automatic search code.
* Manual search code: Please click "label list" to choose the right appliance brand and code.
2. If the code is set up properly, you can immediately manipulate all or the vast majority of functional appliances.
(Each device code just set once automatic memory, the next use without re-setting.)

@ Step three when no applicable code, use the learning function

1. Please APP want to learn to move the device screen display (with TV, for example).
2. Click on the top left of L symbol, press the "OK" after entering the learning function, L symbol will turn into orange that enter the learning mode, Bluetooth box red LED light will also be constant.
3. Keep the infrared remote control to learn end alignment Bluetooth Box infrared end, both 1-2 cm apart (can be put on the table).
4. Click on the picture to learn APP button, such as "power", the red LED will start flashing Bluetooth box, then press the "Power" button on the remote control, the screen will display the "learning success" or "Learning to fail."
5. Repeat step 4, and so on, to learn from other keys.
6. After learning is completed, please click on the bottom left of the screen to return to exit the learning mode, complete the learning process.
7. Requests the test button is valid just learn good, such as invalid, repeat steps 1-6.
* After entering the learning mode after 10 seconds if not set will automatically exit the learning mode.

Other appliances learn ceiling fans, electric fans and lighting with an infrared remote control: @ Step Four other appliances to learn.

1. Please APP screen moves to "learn" the screen.
2. Click on the top left of L symbol, press the "OK" after entering the learning function, L symbol will appear next to the light bulb icon, Bluetooth box red LED will light constant.
3. Keep the infrared remote control to learn end alignment Bluetooth Box infrared end, both 1-3 cm apart (can be put on the table).
4. Click on any of the blank screen button, the red LED will start flashing Bluetooth box, then press the remote controller's office would like to learn a button, the screen will display the "learning success" or "failure to learn."
5. When learning is successful, you can press the Select icon.
6. If the study fails, repeat steps 1 through 4 to re-learn.
7. If the study is successful, can be shown together for future use: Please click on the gear icon in the bottom right of the screen, to determine the start button style editor, then click the button just learning success, you can choose the icon you want the button.